Hi, Nimish, Sorry for my "10_Gbe_v2" typo. I meant "ten_Gbe_v2". There is no "10_Gbe_v2" block. I am using the "ten_Gbe_v2" block for ROACH2.
Dave On Feb 13, 2013, at 2:47 PM, Nimish Sane wrote: > Hi Dave and others, > > I was under the impression that "ten_Gbe_v2" was suppose to support ROACH2 as > well. At least, its mask supports parameters specific to ROACH2 (such as > choice between CX4, SFP+ and ports etc.). Rather, these options are available > in the mask only for ROACH2. > > Is "10_Gbe_v2" part of SKA-SA github repository now and is that supposed to > be used instead of "ten_Gbe_v2"? I have not updated the repository of late > and have been using ten_Gbe_v2 for my ROACH2 design. > > Thanks, > > Nimish > > On Wed, Feb 13, 2013 at 5:07 PM, David MacMahon <dav...@astro.berkeley.edu> > wrote: > Hi, John, > > My current work is on ROACH2 and the "10_Gbe_v2" block is the only 10 GbE > block supported on ROACH2 so that's the one I'm currently designing with (but > not yet using myself). I'm not sure which block Christopher used in the > packet generator. His design ran on a ROACH so it could have been using the > "ten_GbE" or "ten_Gbe_v2" block. > > Dave > > On Feb 13, 2013, at 2:01 PM, John Ford wrote: > > >> Hi, John, > >> > >> The benchmarking tests were done here by Christopher Schollar who was > >> visiting from the University of Cape Town. I'm not sure which library > >> version he used, but I can find out. > > > > It was mostly just curiosity on my part, but are you using the same blocks > > for your work? > > > > John > > > > > >> > >> Dave > >> > >> On Feb 13, 2013, at 1:30 PM, John Ford wrote: > >> > >>>> Hi, Rich, > >>>> > >>>> We've sustained 9.9 Gpbs simultaneously from two 10 GbE ports (19.8 > >>>> Gbps > >>>> aggregate) on a ROACH into a PC with two 10 GbE NICs without dropping > >>>> any > >>>> packets. This was direct connect (i.e. no switch) and "transmit only" > >>>> (i.e. no packets were sent back to the ROACH). > >>>> > >>> > >>> Rich, Dave, can you tell us the versions of the libraries you have? > >>> > >>> Thanks! > >>> > >>> John > >>> > >>>> Hope this helps, > >>>> Dave > >>>> > >>>> On Feb 13, 2013, at 1:06 PM, Rich Lacasse wrote: > >>>> > >>>>> Hi All, > >>>>> > >>>>> Using the latest 10 GbE yellow block, has anyone achieved a sustained > >>>>> data rate of greater than 8 Gb/s? > >>>>> > >>>>> Thanks, > >>>>> Rich > >>>>> > >>>> > >>>> > >>>> > >>> > >>> > >> > >> > > > > > > >