Hi Shayan, please do not forget to CC'ing the bugs.
Il giorno mer, 29/06/2011 alle 14.13 -0700, Shayan Mansuri ha scritto: > Hi > > Plz tell me whatever you want to know. These are the same commands you > used on my laptop: > > ~ $uname -a > Linux keivan-laptop 2.6.39-2-amd64 #1 SMP Wed Jun 8 11:01:04 UTC 2011 > x86_64 GNU/Linux > > > > ~ $lspci -vnn | grep 14e4 > 03:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 > 100Base-TX [14e4:170c] (rev 02) > 0b:00.0 Network controller [0280]: Broadcom Corporation BCM4311 > 802.11b/g WLAN [14e4:4311] (rev 01) > > > > ~ $dmesg |grep -i b43 > [ 2.163713] b43-pci-bridge 0000:0b:00.0: PCI INT A -> GSI 16 > (level, low) -> IRQ 16 > [ 2.163724] b43-pci-bridge 0000:0b:00.0: setting latency timer to > 64 > [ 7.116840] b43-phy0: Broadcom 4311 WLAN found (core revision 10) > [ 7.460043] Registered led device: b43-phy0::tx > [ 7.460066] Registered led device: b43-phy0::rx > [ 7.460092] Registered led device: b43-phy0::radio > difference is here: there is no firmware loaded for me, Also, I know > there is firmware rev 02 is availabe for bcm4311. previously I used > rev 01 Please paste the output of 'dpkg -l |grep b43'. It should be: ii b43-fwcutter 1:014-4 Utility for extracting Broadcom 43xx firmware ii firmware-b43-installer 1:014-4 Installer package for firmware for the b43 driver (in your first e-mail there was not 'firmware-b43-installer' package listed but I don't know if reportbug does not show it or if it is *really* not installed) Cheers, Fabrizio.
signature.asc
Description: This is a digitally signed message part
