Hi Keivan, Il giorno mer, 29/06/2011 alle 15.23 -0700, Shayan Mansuri ha scritto: > My name is Keivan but my Email name is shayan for security reasons. > > > I'm new to debian and new to bug report. What do you mean by "CC'ing > the bugs"?
Add '632...@bugs.debian.org' in Cc when you reply to me. > it's the same > > keivan@keivan-laptop ~ $ dpkg -l |grep b43 > ii b43-fwcutter 1:014-4 > Utility for extracting Broadcom 43xx firmware > ii firmware-b43-installer 1:014-4 > Installer package for firmware for the b43 driver > All needed packages are installed correctly. > I discovered some new factcs. > If I shutdown the laptop with WiFi on then in the first boot kernel > can load firmware and WiFI LED turns on. > > > keivan@keivan-laptop ~ $ dmesg | grep -i b43 > [ 2.201111] b43-pci-bridge 0000:0b:00.0: PCI INT A -> GSI 16 > (level, low) -> IRQ 16 > [ 2.201121] b43-pci-bridge 0000:0b:00.0: setting latency timer to > 64 > [ 7.034048] b43-phy0: Broadcom 4311 WLAN found (core revision 10) > [ 7.414026] Registered led device: b43-phy0::tx > [ 7.414048] Registered led device: b43-phy0::rx > [ 7.414072] Registered led device: b43-phy0::radio > [ 16.732059] b43-phy0: Loading firmware version 478.104 (2008-07-01 > 00:50:23) > It loads firmware without problems. > > but when I turn wifi off and then I want to turn it on again WiFi > turns on and automatically turns off again. However, LED never turns > on. > > > > keivan@keivan-laptop ~ $ dmesg |grep -i b43 > [ 2.201111] b43-pci-bridge 0000:0b:00.0: PCI INT A -> GSI 16 > (level, low) -> IRQ 16 > [ 2.201121] b43-pci-bridge 0000:0b:00.0: setting latency timer to > 64 > [ 7.034048] b43-phy0: Broadcom 4311 WLAN found (core revision 10) > [ 7.414026] Registered led device: b43-phy0::tx > [ 7.414048] Registered led device: b43-phy0::rx > [ 7.414072] Registered led device: b43-phy0::radio > [ 16.732059] b43-phy0: Loading firmware version 478.104 (2008-07-01 > 00:50:23) > [ 2076.816088] b43-phy0: Radio hardware status changed to DISABLED > [ 2081.828112] b43-phy0: Radio hardware status changed to ENABLED > [ 2086.836117] b43-phy0: Radio hardware status changed to DISABLED I don't know your laptop layout but I suspect you press a button or switch something to turn on/off wifi. Try in this way: after you turn off the wifi pressing button do 'modprobe -r b43 ssb' and then reload them with 'modprobe b43 ssb' turn it on again and tell me what happens. Cheers, Fabrizio. > > ______________________________________________________________________
signature.asc
Description: This is a digitally signed message part
