Omar, good evening.
It is a program that uses PSK  (31, 63, 125, 250) .  It can use regular PSK
for keyboard chats but you can also decide to use PSK with ARQ if you want
to send a text file or email where accuracy is important.  The software
works only under Linux, so the authors have developed a boot disc that one
uses in a Windows PC.  You burn the ISO file to a CD and insert it in a CD
ROM drive, the Linux operating system boots up.  You select a keyboard
setting for you country and a video monitor setting.  When the software
boots up, you need to select FL-digi and go to the CONFIG area, insert your
callsign. In the config area you can also choose your soudncard settings and
PTT/rig control settings.  If you want to use the ARQ side of things, you
click on FLARQ, when it boots up you must also insert your callsign in it's
config area.

Andy K3UK

On 10/21/07, Omar Shabsigh <[EMAIL PROTECTED]> wrote:
>
>    Folks,
>
> What is NBEMS please?
>
> Omar YK1AO
>
>
> ----- Original Message -----
> *From:* Rick <[EMAIL PROTECTED]>
> *To:* digitalradio@yahoogroups.com
> *Sent:* Saturday, October 20, 2007 4:52 AM
> *Subject:* Re: [digitalradio] NBEMS HF testing frequency suggestion
>
>  I too downloaded the .iso yesterday and immediately burned a CD to boot
> both of my computers. While I do not expect Linux to be able to properly
> drive my Samsung SyncMaster 225BW monitor to its native resolution, I
> can usually get by with one of the other resolutions. Even though not
> acceptable for normal use, it can work well enough for experimental use.
>
> The problem with both computers is that the program tends to lock up and
> crash or if it does key up I get a kind of machine gun sound in the
> audio coming from the sound card. This was also true of a previous
> version. Almost like an interruption in the stream. Now the curious
> thing is that in the past one one boot disk I was testing had another
> digital program which worked quite well. Could I possibly be correct
> that it was Digipan running under Wine? Even the audio settings were
> right on with that program, but on the same boot disk the main flDigi
> program would not run properly. Has anyone else had this problem?
>
> In order for PSKmail or NBEMS to even have any realistic chance at being
> used here in the U.S., it simply has to run under Windows at this time.
> Dual boots or Boot disk approaches are not adequate for practical use,
> although they can give you a feel for the program. Hopefully many of you
> are having better luck than I am.
>
> With a Windows version you could avoid the downsides of Linux. Although
> ten years from now it may be a different story, it was about ten years
> ago that I predicted that Linux OS would be a major desktop player in 5
> years. You could say that I was a bit wrong on that call:(
>
> 73,
>
> Rick, KV9U
>
> Rud Merriam wrote:
> > I just burned the CD. I will setup the laptop and rig to try on these
> > frequencies and nearby. Probably operational in 20-30 minutes.
> >
> > Rud Merriam K5RUD
> > ARES AEC Montgomery County, TX
> > http://TheHamNetwork.net
> >
> >
> > -----Original Message-----
> > From: digitalradio@yahoogroups.com <digitalradio%40yahoogroups.com>[mailto:
> digitalradio@yahoogroups.com <digitalradio%40yahoogroups.com>] On
> > Behalf Of Andrew O'Brien
> > Sent: Thursday, October 18, 2007 8:35 PM
> > To: DIGITALRADIO
> > Subject: [digitalradio] NBEMS HF testing frequency suggestion
> >
> >
> > Aside from 6M and 2M , where I had good results with NBEMS, I am anxious
> to
> > try it on HF. I will assume that the low bands will make fast PSK too
> > difficult but PSK125 and 63 with ARQ is worth testing on HF. NBEMS has a
> > nice bacon feature , and a beacon feature too. I would like to suggest a
> > 20M and 40M testing frequency for this weekend, I will suggest 14073
> (dial
> > frequency) and/or 7073 . Please
> > QRL first, and move up or down a tad if the frequency is busy. I
> > will be on tonight and tomorrow night with my beacon (when at the
> keyboard).
> >
> >
> >
>
>  
>



-- 
Andy K3UK
www.obriensweb.com
(QSL via N2RJ)

Reply via email to