I have not used a SignalLink interface. I have used VOX to operate RFSM2400,
which worked quite well after I dropped the VOX delay to .5 sec. There is a
sync pulse at the beginning of the RFSM burst that allows this to work well.
The main reason I don't use VOX for data is because I want to avoid incidental
keying of the transmitter. This may not be an issue with the SignalLink.
The modes that don't work well are most likely the ones that switch back and
forth quickly, like Amtor and Pactor. (Not sure how quickly ALE switches.) You
really need the high dollar SCS modem for most Pactor work anyway.
We need to get away from those fast-switching modes anyway. They are harder on
the equipment. The ARQ modes in NBEMS are not fast switching.
Personally I use a Rigblaster but I still have some serial ports on my ham
computer.
Howard K5HB
----- Original Message ----
From: matt gregory <[EMAIL PROTECTED]>
To: digitalradio@yahoogroups.com
Sent: Monday, August 25, 2008 7:54:50 PM
Subject: [digitalradio] signalink sL+
WONDERING IF ANYBODY IS USING A SIGNALINK SL+
FOR HIGH SPEED ARQ SOFTWARE IE RFSM2400 OR ALIKE ?
I'M CURIOUS OF PERFORMANCE BEFORE I CONSIDER PURCHASE
MATTHEW A. GREGORY
KC2PUA
