OK. And the bias setting?
Thanks, Steve
From: Don Wilhelm <donw...@embarqmail.com>
To: Steve Wilson <steve_wil...@yahoo.com>; "Elecraft@mailman.qth.net"
<Elecraft@mailman.qth.net>
Sent: Monday, April 17, 2017 8:35 PM
Subject: Re: [Elecraft] K3 & Heil HM-10 Dual
Steve,
Heil is giving out erroneous information. The low output Heil
microphones require setting the K3 mic gain range to HIGH.
73,
Don W3FPR
On 4/17/2017 11:14 PM, Steve Wilson via Elecraft wrote:
> Hi all,
> I setup a K3, that my godfather is borrowing, while his Kenwood is off the
> air. I reviewed the webpage on the Heil Sound website here:
> https://heilsound.com/heil-amateur-radio/support/dsp-settings/all-things-elecraft/
> Unfortunately, the page refers to the mic with regard to the front panel
> setting, but does not specifically refer to the mic model with respect to the
> mic gain and mic bias settings. I sent an email to Heil Sound suggesting that
> the missing detail be added for this particular mic. But thought I'd ask
> here, in case anyone knew the answer. I deduced that the setting should be
> Front Panel, Low, No Bias, but am not 100% sure about that!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
