It's not clear why this feature of the KPA500 is a "PITA," since the majority of users want the rig and the amp. to always be locked to the same band. However, I suppose it could be a problem in a station where antenna switching is all manual rather than automatic.
In that case, one can change the KPA500 "RADIO" menu from "K3" to "BCD", and now the band buttons will not change the band of the K3 anymore, but the amp. will still follow band changes made by the K3. Hope that helps. 73, Bob, N6TV On Sun, Apr 25, 2021 at 1:11 PM Andy Durbin <a.dur...@msn.com> wrote: > "FYI, you can still tap the BAND buttons on the KPA500 to change bands on > the K3, because that uses the AUXBUS line (ACC Pin 2), not the BAND DATA > lines. Many folks may have never discovered this cool feature of the > KPA500 and KPA1500." > > I had to write code to put the KPA500 back on the correct band if one of > these band buttons was accidentally pressed. I wish there was a way to > disable them completely. One person's cool feature is another's PITA. > > Andy, k3wyc > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
