On Fri, Oct 29, 2021 at 4:19 PM Jim McDonald <j...@n7us.net> wrote: > My K-Pod tune at half the rate of the K3S at all three VFO CTS settings. >
Check again, because that does not match my experience if your K-POD firmware is at 1.09 (can't test now, sold both K3s). If CONFIG:VFO CTS is set to 100 (or 200?), I'm pretty sure the K-POD knob tunes at the same rate as the VFO A knob. I don't think a power cycle is required. If Elecraft could do it, I'd like for the K3/K3S F/W to provide the option > for the K-Pod to tune at the same rate. > Yes, we asked for that years ago, but it never happened, and I don't think it will ever happen. There's just no room left in the K3's limited memory to add such complex code now. Consider upgrading from the K3 to a K4. K-POD plugs straight in via USB cable and works perfectly. 73, Bob, N6TV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
