Glenn:
In the KAT500 manual, page 5. Figure 1 Cabling Diagram is the better way
to connect the items. It does not use the key line interrupt. That is
the configuration which I have used, very successfully, for years.
In the K3S, set the MENU for 20 watts TUNE power, and from the CONFIG
menu PWR SET to Per Band.
73
Bob, K4TAX
On 10/10/2023 7:18 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 23 Date: Tue, 10 Oct 2023 05:17:26 -0700 From: Glenn Maclean
<wa7...@att.net> To: elecraft@mailman.qth.net Subject: [Elecraft]
KPA500 / KAT500 and W2 watt meter question Message-ID:
<3a0e28e4-8411-4394-a880-0fec58bf3...@att.net> Content-Type:
text/plain; charset=us-ascii I just ordered the KPA500/KAT500 combo
and W2 watt meter for my K3S. Should I use the key line interrupt
connected to the W2 watt meter or should I connect the key line
interrupt to the KAT500? Do I even need to use key line interrupt with
the K line set up? Thanks in advance Glenn WA7SPY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com