Hi Joe, Are you using any VAC (Virtual Audio Cable) software?
73, Luke - K6LO ----- Original Message ----- From: "Joseph Veras" <k9oc...@gmail.com> To: "flexradio" <flexradio@flex-radio.biz> Sent: Monday, August 15, 2011 8:54:53 AM Subject: [Flexradio] Flex 3K Audio Buzz Ever since having my Flex 3K return from factory service on different problem - and the simultaneous upgrade to PSDR 2.1.5- I have been experiencing a buzzing sound on received signals. The same buzz is on my transmitted signal as well. Sounds almost as if I am running 60 Hz AC on the plates the way some amateurs did in the long ago dark ages of the hobby! This may occur after the rig/software has been on for only a few minutes . . . or it may not occur for several hours. Switching PSDR off then on again provides immediate, though temporary, relief - but is inconvenient when in QSO mode. The problem is present on both SSB & CW. Anyone else seen this problem? Anyone have a solution? Thanks- Joe, K9OCO _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
