On Oct 7, 2008, at 12:51 PM, Jeremy Chadwick wrote:
It would help if we could see some of his sysctl date, specifically
these:
debug.cpufreq.*
dev.cpufreq.[0-9].*
dev.cpu.[0-9].freq
dev.cpu.[0-9].freq_levels
$ sysctl debug.cpufreq
debug.cpufreq.verbose: 0
debug.cpufreq.lowest: 0
$ sysctl dev.cpufreq.0
dev.cpufreq.0.%driver: cpufreq
dev.cpufreq.0.%parent: cpu0
$ sysctl dev.cpufreq.1
dev.cpufreq.1.%driver: cpufreq
dev.cpufreq.1.%parent: cpu1
$ sysctl dev.cpu | grep freq
dev.cpu.0.freq: 2984
dev.cpu.0.freq_levels: 2984/-1 2611/-1 2238/-1 1865/-1 1492/-1 1119/-1
746/-1 373/-1
For all we know, it could be the heatsink/fan is not properly mounted,
or there's too much thermal paste. Who knows.
I remounted the heatsink (side note: curse you, Intel - was that meant
to be funny?), and didn't apply a single bit of paste other than what
came on it. I don't have the ability to boot Windows on this system,
or at least not without some pain (it's a server with no extra drive
space I could readily set aside to install it, for starters).
Since fiddling with the heatsink, the temperature was down to 45C at
boot. I did another "make -j4 buildworld" and it got up to 58C.
Since killing that build, it's slowly working its way back into the
high 40s (currently bouncing between 48 and 49).
--
Kirk Strauser
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"