Hi,
I just purchased a USB data cable for my Samsung e715, unfortunately i am unable to get it to work under linux.
Does anybody know which module to use with this device? i tried cdc-acm and usbserial and niether worked. probably because it is an interface device and not a modem or serial port.
If this cable will not work, does anybody know of a brand of cables that will? This phone uses the same type of cable as most Samsung GSM phones.
Here is the listing from /proc/bus/usb/devices: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=10ab ProdID=10c5 Rev= 1.00 S: Manufacturer=Silicon Labs S: Product=usb data cable S: SerialNumber=0001 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
any help would be much appreciated.
-- Munir Nassar
------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
