Hi:
I recently install OpenBSD in a Dell PowerEdge 1400sc, everything
works fine [like always] but I found 2 issues that I cant resolve.
Machine : Dell PowerEdge 1400 sc / 512MB / 34GB scsi disk / Intel 10/100
OS : OpenBSD 3.9
Kernel : GENERIC.MP
1. Even using halt -p the machine dont power down. The kernel recognize piixpm.
2. There is a problem with the iic framework, the kernel recognize two
sensors but them give me a long list of iic devices dont configured,
sorry but I never need to configure a device before, so I dont know
how to do it.
Please if anyone can help me on this I will thanks very much. Maybe
OpenBSD doesnt support yet this particular issues, but at least I need
a guide to keep working on it.
Here is my dmesg:
OpenBSD 3.9 (GENERIC.MP) #598: Thu Mar 2 02:37:06 MST 2006
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel"
686-class) 1.27 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem = 536449024 (523876K)
avail mem = 482430976 (471124K)
using 4278 buffers containing 26927104 bytes (26296K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 08/12/02, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc370/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks OSB4" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x6000
mainbus0: Intel MP Specification (Version 1.4) (DELL POWEREDGE CE)
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 132 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel(R) Pentium(R) III CPU family 1266MHz ("GenuineIntel"
686-class) 1.27 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0, remapped to apic 2
ioapic1 at mainbus0: apid 3 pa 0xfec01000, version 11, 16 pins
ioapic1: misconfigured as apic 0, remapped to apic 3
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06
pci1 at pchb1 bus 1
ahc0 at pci1 dev 2 function 0 "Adaptec AIC-7899 U160" rev 0x01: apic 3
int 14 (irq 5)
scsibus0 at ahc0: 16 targets
sd0 at scsibus0 targ 1 lun 0: <SEAGATE, ST336706LW, 8A03> SCSI3 0/direct fixed
sd0: 34732MB, 26302 cyl, 4 head, 676 sec, 512 bytes/sec, 71132959 sec total
ahc1 at pci1 dev 2 function 1 "Adaptec AIC-7899 U160" rev 0x01: apic 3
int 15 (irq 11)
scsibus1 at ahc1: 16 targets
fxp0 at pci0 dev 2 function 0 "Intel 8255x" rev 0x08, i82559: apic 3
int 0 (irq 11), address 00:b0:d0:fc:e5:9c
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci0 dev 14 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpm0 at pci0 dev 15 function 0 "ServerWorks OSB4" rev 0x50: SMI
iic0 at piixpm0
admtemp0 at iic0 addr 0x18: adm1021
"unknown" at iic0 addr 0x1a not configured
"unknown" at iic0 addr 0x20 not configured
"unknown" at iic0 addr 0x21 not configured
"unknown" at iic0 addr 0x22 not configured
"unknown" at iic0 addr 0x23 not configured
"unknown" at iic0 addr 0x24 not configured
"unknown" at iic0 addr 0x25 not configured
"unknown" at iic0 addr 0x26 not configured
"unknown" at iic0 addr 0x27 not configured
"unknown" at iic0 addr 0x28 not configured
"unknown" at iic0 addr 0x29 not configured
"unknown" at iic0 addr 0x2a not configured
"unknown" at iic0 addr 0x2b not configured
lmenv0 at iic0 addr 0x2c: ds1780 rev 1
lmenv1 at iic0 addr 0x2d: ds1780 rev 1
"unknown" at iic0 addr 0x2e not configured
"unknown" at iic0 addr 0x2f not configured
"unknown" at iic0 addr 0x48 not configured
"unknown" at iic0 addr 0x49 not configured
"unknown" at iic0 addr 0x4a not configured
"unknown" at iic0 addr 0x4b not configured
admtemp1 at iic0 addr 0x4c: adm1032
"unknown" at iic0 addr 0x4d not configured
"unknown" at iic0 addr 0x4e not configured
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <LG, CD-ROM CRD-8484B, 2.01> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2
ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x04:
apic 2 int 10 (irq 10), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x3f
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
--
Anibal Amiama-Veras
-------------------------------------------------------------------------------
God's a kid with an ant farm, lady. | Constantine / 2005
-------------------------------------------------------------------------------
