> # /etc/init.d/nut start > Starting Network UPS Tools:Network UPS Tools - UPS driver controller 2.0.2 > Network UPS Tools - Generic SafeNet UPS driver 0.03 (2.0.2) > > Communications with UPS lost: Status read failed > Communications with UPS lost: Status read failed > SafeNet protocol compatible UPS not found on /dev/ttyS1 > Driver failed to start (exit status=1) > (upsdrvctl failed). > > any suggestions?
Run the driver in debug mode, I already suggested this in the previous message. The driver will be more verbose about what the cause is that it won't run. Regards, Arjen -- Eindhoven - The Netherlands Key fingerprint - 66 4E 03 2C 9D B5 CB 9B 7A FE 7E C1 EE 88 BC 57 _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
