Here is my output:
# /lib/nut/safenet -a everpower1000 -DDDDD Network UPS Tools - Generic SafeNet UPS driver 0.03 (2.0.2) debug level is '5' C : ZCADLIOPERJD S : [empty] C : ZCADLIOPERJD S : [empty] C : ZCADLIOPERJD S : [empty] C : ZCADLIOPERJD S : [empty] Communications with UPS lost: Status read failed C : ZCADLIOPERJD S : [empty] Communications with UPS lost: Status read failed SafeNet protocol compatible UPS not found on /dev/ttyS1 Arjen de Korte wrote: >>> Run the driver in debug mode, I already suggested this in the previous >>> message. The driver will be more verbose about what the cause is that it >>> won't run. >>> >> how do I run it in debug mode? >> > > Run (as root) > > <path to driver>/safenet -a everpower1000 -DDDDD > > >> I think that the problem is that the device does not support the safenet >> protocol. >> > > Maybe, maybe not. > > >> when I cat /dev/ttyS1, I get no output at all. >> is that normal for safenet? >> > > Yes. The device will only answer when a query or a command is sent. > > Regards, Arjen > > PS Keep the mailinglist CC-ed. I will not reply to private messages. > > _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser