*********************** Your mail has been scanned by InterScan MSS. ***********************
Peter, Thank you very much for the patch. After applying your patch, newhidups & upsd ran successfully. The output of upsc is as follow: driver.name: newhidups driver.parameter.port: auto driver.version: 2.1.0 unmapped.ablerexups.batterysystem.batterysystemid: 0 unmapped.ablerexups.batterysystem.presentstatus.good: 0 unmapped.ablerexups.batterysystem.presentstatus.used: 0 unmapped.ablerexups.batterysystem.temperature: 0 unmapped.ablerexups.batterysystem.test: 0 unmapped.ablerexups.batterysystem.voltage: 0 unmapped.ablerexups.flow.configactivepower: 0 unmapped.ablerexups.flow.configapparentpower: 0 unmapped.ablerexups.flow.configfrequency: 0 unmapped.ablerexups.flow.configvoltage: 0 unmapped.ablerexups.flow.delaybeforeshutdown: 0 unmapped.ablerexups.flow.delaybeforestartup: 0 unmapped.ablerexups.flow.flowid: 0 unmapped.ablerexups.flow.highvoltagetransfer: 0 unmapped.ablerexups.flow.imanufacturer: 0 unmapped.ablerexups.flow.iproduct: 0 unmapped.ablerexups.flow.iserialnumber: 0 unmapped.ablerexups.flow.lowvoltagetransfer: 0 unmapped.ablerexups.powerconverter.output.presentstatus.ablerex1: 0 ups.mfr: UIS Ablerex ups.model: Ablerex USB Interface 049e I then turned off the main switch & then ran upsc again. Even the UPS was on battery, the output of upsc remained the same. I was hopping at least one of the values would dropped to a negative value. What should I do next? Thanks. **** On Sat, 23 Sep 2006 16:06:37 -0300 (ADT) [EMAIL PROTECTED] (Peter Selinger) wrote: >The patch I just sent may not work; please try this one instead. >-- Peter > _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser