*********************** Your mail has been scanned by InterScan MSS. ***********************
Peter, Thanks for your help. I will email the manufacturer's engineer to see if he can help. **** >On Sun, 24 Sep 2006 20:22:36 -0300 (ADT) >[EMAIL PROTECTED] (Peter Selinger) wrote: > >I don't know, this doesn't look so good. Your UPS reports "0" as the >value for everything. I don't know what to do about it. -- Peter > >Lau Kim Ping wrote: >> >> >> Peter, >> >> Thank you very much for the patch. After applying your patch, newhidups & >> upsd ran successfully. The output of upsc is as follow: >> >> driver.name: newhidups >> driver.parameter.port: auto >> driver.version: 2.1.0 >> unmapped.ablerexups.batterysystem.batterysystemid: 0 >> unmapped.ablerexups.batterysystem.presentstatus.good: 0 >> unmapped.ablerexups.batterysystem.presentstatus.used: 0 >> unmapped.ablerexups.batterysystem.temperature: 0 >> unmapped.ablerexups.batterysystem.test: 0 >> unmapped.ablerexups.batterysystem.voltage: 0 >> unmapped.ablerexups.flow.configactivepower: 0 >> unmapped.ablerexups.flow.configapparentpower: 0 >> unmapped.ablerexups.flow.configfrequency: 0 >> unmapped.ablerexups.flow.configvoltage: 0 >> unmapped.ablerexups.flow.delaybeforeshutdown: 0 >> unmapped.ablerexups.flow.delaybeforestartup: 0 >> unmapped.ablerexups.flow.flowid: 0 >> unmapped.ablerexups.flow.highvoltagetransfer: 0 >> unmapped.ablerexups.flow.imanufacturer: 0 >> unmapped.ablerexups.flow.iproduct: 0 >> unmapped.ablerexups.flow.iserialnumber: 0 >> unmapped.ablerexups.flow.lowvoltagetransfer: 0 >> unmapped.ablerexups.powerconverter.output.presentstatus.ablerex1: 0 >> ups.mfr: UIS Ablerex >> ups.model: Ablerex USB Interface 049e >> >> I then turned off the main switch & then ran upsc again. Even the UPS was >> on battery, the output of upsc remained the same. I was hopping at least >> one of the values would dropped to a negative value. What should I do next? >> Thanks. >> >> **** >> >> On Sat, 23 Sep 2006 16:06:37 -0300 (ADT) >> [EMAIL PROTECTED] (Peter Selinger) wrote: >> >> >The patch I just sent may not work; please try this one instead. >> >-- Peter >> > >> > _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser