Krzysztof Sasiak wrote: > I modified your config accordingly and now I get the following message: > > Serial-over-USB transport layer for Megatec protocol driver > [megatec_usb] > > debug level is '3' > Checking device (06DA/0003) (002/002) > - VendorID: 06da > - ProductID: 0003 > - Manufacturer: unknown > - Product: unknown > - Serial Number: unknown > - Bus: 002 > Trying to match device > Device matches
OK, as far as 'ups.conf' is concerned, it is working. The driver attempts to connect to the UPS. > failed to claim USB device, trying 2 more time(s)... > detaching kernel driver from USB device... > failed to detach kernel driver from USB device... > trying again to claim USB device... > failed to claim USB device, trying 1 more time(s)... > detaching kernel driver from USB device... > failed to detach kernel driver from USB device... > trying again to claim USB device... > failed to claim USB device, trying 0 more time(s)... > detaching kernel driver from USB device... > failed to detach kernel driver from USB device... > trying again to claim USB device... Uh oh, detaching the driver that is already bound to the device seems to have failed. This is either a permissions problem or your kernel doesn't support detaching drivers. To diagnose this, try adding the '-u root' option to the startup of the driver. > Starting UPS detection process... > Attempting to detect the UPS... > Sending "Q1" command... > Wrong answer to "Q1" command. > Attempting to detect the UPS... > Sending "Q1" command... > Wrong answer to "Q1" command. > Attempting to detect the UPS... > Sending "Q1" command... > Wrong answer to "Q1" command. > Attempting to detect the UPS... > Sending "Q1" command... > Wrong answer to "Q1" command. > Attempting to detect the UPS... > Sending "Q1" command... > Wrong answer to "Q1" command. > 5 out of 5 detection attempts failed (minimum failures: 2). > Megatec protocol UPS not detected. > > It clearly is trying to communicate so it seems the protocol may be > unsupported. You're jumping to conclusions. So far, all I can see is that the driver cannot bind to the device. That needs to be fixed first, before it can talk to the UPS. Best regards, Arjen _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
