Arjen de Korte wrote: >> # /etc/ups/upssched.conf >> CMDSCRIPT /usr/sbin/upssched-cmd >> #PIPEFN /var/state/ups/upssched.pipe >> #LOCKFN /var/state/ups/upssched.lock >> PIPEFN /var/run/ups/upssched.pipe >> LOCKFN /var/run/ups/upssched.lock >> AT ONBATT * START-TIMER ups-on-battery-timer 121 >> AT ONLINE * CANCEL-TIMER ups-on-battery-timer >> AT ONBATT * EXECUTE ups-on-battery >> AT ONLINE * EXECUTE ups-back-on-line >> >> There is no /var/state in openSUSE 10.3, so I changed PIPEFN and LOCKFN to >> /var/run and defined directory /var/run/ups. > > We need a pre3 to fix this since this has been a long standing bug. This > path is hardcoded in the example configuration, where running > ./configure should set this path properly. In fact, Charles fixed this > in the trunk, but apparently we didn't backport the fix to Testing. Good > catch!
Never mind the above. Apparently, you're using an older upssched.conf file. This should be fixed in the .spec file I use. Best regards, Arjen _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser