Hi all, This is my first experience with NUT. I'm trying to test a Liebert PSA 1500 UPS, connected via USB to a single PC. I have followed the instruction in the "Configuration" section of the online user manual.
Everything seems to be fine, except that, when I run "upsc liebert@localhostups.status", it retuns "OB", even if the UPS is currently online. Here are the information related to my system: - Debian 6.0 on Intel Pentium 4; kernel version 2.6.32-5-686; - NUT version 2.4.3-1.1squeeze1, installed with package system; - UPS: Liebert PSA1500MT3-230U My ups.conf is the following: [liebert] driver = usbhid-ups port = auto desc = "Liebert PSA1500MT3 UPS" The result of "upsdrvctl start" is: Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - Generic HID driver 0.34 (2.4.3) USB communication driver 0.31 Using subdriver: Belkin HID 0.12 The result of "upsd" is: Network UPS Tools upsd 2.4.3 listening on 127.0.0.1 port 3493 listening on ::1 port 3493 Connected to UPS [liebert]: usbhid-ups-liebert The complete list obtained with "upsc" is: battery.charge.low: 38 battery.charge.warning: 38 battery.type: PbAc device.mfr: Emerson Network Power device.model: LiebertPSA device.serial: device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.4.3 driver.version.data: Belkin HID 0.12 driver.version.internal: 0.34 ups.mfr: Emerson Network Power ups.model: LiebertPSA ups.productid: 0001 ups.serial: ups.status: OB ups.vendorid: 10af What problem could be there? I would like to paste also a complete tracing of "/lib/nut/usbhid-ups -DDDDD -a liebert", but the message would become too big. Please tell me if there is any relevant portion that I could paste here. Thanks in advance for your help. Pier
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser