Hi, i have the ups in the subject. It is connected with usb cable. With nut 2.4.3 it was working quite good with megatec-usb driver. Now i just upgraded to nut 2.6 on my gentoo system and switching to blazer_usb is not working. Copying old megatec_usb driver from 2.4.6 and using it, everything returns to function. Some output with blazer_usb:
* Service upsdrv starting Network UPS Tools - UPS driver controller 2.6.0 Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.6.0) No supported UPS detected Driver failed to start (exit status=1) Failed to start UPS drivers! [ !! ] * ERROR: upsdrv failed to start with megatec_usb: * Service upsdrv starting Network UPS Tools - UPS driver controller 2.6.0 Network UPS Tools - Megatec protocol driver 1.6 (2.4.3) Serial-over-USB transport layer 0.10 Megatec protocol UPS detected [ VT12094S]. * Service upsdrv started What can I do to use the new, still supported and developed blazer driver? Many thanks Andrea _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser