Citeren Andrea <krog...@gmail.com>:
Some output with blazer_usb:
* Service upsdrv starting
Network UPS Tools - UPS driver controller 2.6.0
Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.6.0)
No supported UPS detected
Driver failed to start (exit status=1)
Failed to start UPS drivers!
[
!! ]
* ERROR: upsdrv failed to start
Start the driver again, now with debugging enabled:
/path/to/blazer_usb -DDD -a <upsname>
Assuming the detection will fail, just post the full output from the
above command here. Just to be sure, post the output of
lsusb -v
as well.
Best regards, Arjen
--
Please keep list traffic on the list (off-list replies will be rejected)
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
