> Alternatively, on 10.12 and 10.11, there is a "-u" option to shutdown: > > -u The system is halted up until the point of removing system power, > but waits before removing power for 5 minutes so that an external UPS > (uninterruptible power supply) can forcibly remove power. This simulates a > dirty shutdown to permit a later automatic power on. OS X uses this mode > automatically with supported UPSs in emergency shutdowns. > > Let us know what works. (I have NUT set up on a Mac Mini, but we do not get > frequent power outages, and the machine is set to wake up on a schedule > anyway.)
SHUTDOWNCMD "/sbin/shutdown -u -h +0” in upsmon.conf on the Mac did the trick. Thanks! After power is restored, the Mac starts. What I wonder if the shutdown is done proper. Does the shutdown command use umount to prevent disk corruption? I also have to find a solution for starting up upsmon when the Mac starts and also still open is the notification on the Mac. But thanks so much all for the steps so far. Kind Regards, Rob > On 9 Jun 2017, at 14:42, Charles Lepple <clep...@gmail.com> wrote: > > On Jun 9, 2017, at 4:47 AM, Robbie van der Walle <rvanderwa...@gmail.com> > wrote: >> >>> Under System Preferences, Energy Saver, there is a setting Start up >>> automatically after a power failure. >>> Running sudo pmset -a autorestart 1 does the same trick. >> >> But unfortunately Mac stays . Step 7 >> > > You might want to save off the output of "pmset -g" before experimenting > further - that way, after you find a solution, you can run it again to see > what changed. > > This page implies that the "sudo" and "-a" are not needed: > > > http://www.virtuallyghetto.com/2013/02/enable-auto-startup-after-power-failure.html > > Also potentially useful, though I can't imagine it is changing different > settings under the hood: > > > https://macminicolo.net/blog/files/Be-sure-your-Mac-mini-will-restart-automatically-when-needed.html > > Alternatively, on 10.12 and 10.11, there is a "-u" option to shutdown: > > -u The system is halted up until the point of removing system power, > but waits before removing power for 5 minutes so that an external UPS > (uninterruptible power supply) can forcibly remove power. This simulates a > dirty shutdown to permit a later automatic power on. OS X uses this mode > automatically with supported UPSs in emergency shutdowns. > > Let us know what works. (I have NUT set up on a Mac Mini, but we do not get > frequent power outages, and the machine is set to wake up on a schedule > anyway.)
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
