Hi Sam, Thanks for your reply. Please find the attached picture in which I use scale 10. I think not only the e44 is too big, but also the blue region is out of boundary. Could you please tell me why?
Best, Teng Teng Li Master Candidate in Structures Department of Civil and Environmental Engineering University of Illinois at Urbana-Champaign 205 North Mathews Ave, Urbana, IL. 61801 Phone:(217)8196210, Email: teng...@illinois.edu ________________________________ From: ParaView [paraview-boun...@paraview.org] on behalf of Samuel Key [samuel...@bresnan.net] Sent: Thursday, November 23, 2017 8:20 AM To: paraview@paraview.org Subject: Re: [Paraview] Filter for deformation Teng-- In my experience, using the WARP filter with a scale value of 1.0 on the displacement vector will give the actual distorted mesh at the time step, or load step being examined by ParaView. If you are seeing "mesh overlaps" with the WARP filter as described above, then it is likely one of several conditions: (1) The simulation datum set already contains the deformed mesh at each time/state-of-loading. (Check with whomever wrote the results output routine in your software.) (2) The loads specified are larger than the structure can properly support, (3) The simulation software may contain contact (aka sliding interface) capability that is not being used or improperly specified, (4) .... --Sam On 11/22/2017 9:28 PM, Li, Teng wrote: Hi all, Can anyone tell me how to see the deformed shape? Right now, I can use wrap filter to magnify the displacement. But if I the magnified factor is too small, I can't see the small deformation. However, if I use much a bigger factor, the deformation will be too big that the mesh elements will have some overlap. So I wander which filter I can use to see the deformation directly. Best, Teng Teng Li Master Candidate in Structures Department of Civil and Environmental Engineering University of Illinois at Urbana-Champaign 205 North Mathews Ave, Urbana, IL. 61801 Phone:(217)8196210, Email: teng...@illinois.edu<mailto:teng...@illinois.edu> _______________________________________________ Powered by www.kitware.com<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.kitware.com&d=DwMC-g&c=8hUWFZcy2Z-Za5rBPlktOQ&r=7Ynh-iTRB5WfWs5PAMUyBc4S6lnZBeUlHmC6_Kxw4OY&m=GqDzebtYv825-B_Q1gMNWT2EocfbQ2kjtRDqvwSAMIs&s=qdbM7tFx6ZuG3LgMP_vn9iEzgHdEcR7Y2ZeaYDAFVPE&e=> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.kitware.com_opensource_opensource.html&d=DwMC-g&c=8hUWFZcy2Z-Za5rBPlktOQ&r=7Ynh-iTRB5WfWs5PAMUyBc4S6lnZBeUlHmC6_Kxw4OY&m=GqDzebtYv825-B_Q1gMNWT2EocfbQ2kjtRDqvwSAMIs&s=IED0GzvwhDQ4etQoWvbKQd2Vek05bxhVnUMiKrOfDZ0&e=> Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView<https://urldefense.proofpoint.com/v2/url?u=http-3A__paraview.org_Wiki_ParaView&d=DwMC-g&c=8hUWFZcy2Z-Za5rBPlktOQ&r=7Ynh-iTRB5WfWs5PAMUyBc4S6lnZBeUlHmC6_Kxw4OY&m=GqDzebtYv825-B_Q1gMNWT2EocfbQ2kjtRDqvwSAMIs&s=wbCRawSmIoCcw7zKZDWoXzxzPWy0pGhXQ2YUc8DlDHo&e=> Search the list archives at: http://markmail.org/search/?q=ParaView<https://urldefense.proofpoint.com/v2/url?u=http-3A__markmail.org_search_-3Fq-3DParaView&d=DwMC-g&c=8hUWFZcy2Z-Za5rBPlktOQ&r=7Ynh-iTRB5WfWs5PAMUyBc4S6lnZBeUlHmC6_Kxw4OY&m=GqDzebtYv825-B_Q1gMNWT2EocfbQ2kjtRDqvwSAMIs&s=LE5yZOhTcbrnzLre_PSjiM28gX8qvo7RKKQS6Ggryno&e=> Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview<https://urldefense.proofpoint.com/v2/url?u=http-3A__public.kitware.com_mailman_listinfo_paraview&d=DwMC-g&c=8hUWFZcy2Z-Za5rBPlktOQ&r=7Ynh-iTRB5WfWs5PAMUyBc4S6lnZBeUlHmC6_Kxw4OY&m=GqDzebtYv825-B_Q1gMNWT2EocfbQ2kjtRDqvwSAMIs&s=uchVuKIYbvlynqHnxh2vVj_BHNhgXiiJ8WARn-KL8cU&e=>
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
