Utkarsh, Thanks very much, that helped very much!
Louis Steytler Department of Mechanical Science and Engineering University of Illinois at Urbana-Champaign 1206 West Green Street Urbana, Il 61801 steyt...@illinois.edu ________________________________________ From: Utkarsh Ayachit [utkarsh.ayac...@kitware.com] Sent: 30 January 2018 11:25 AM To: Steytler, Louis Louw Cc: paraview@paraview.org Subject: Re: [Paraview] Extracting data on the surface of a block? Loius, Looks like what you have is quite reasonable. You can drop the "Extract Surface" filter and simply connect the "Plot On Intersection Curves" to the "Merge Blocks" as the "Plot On .." filter does an "Extract Surface" internally. Another option, if you want finer control over the sampling resolution would be to use the "Resample With Dataset" filter" with a custom source that correponds to the sampling locations. I created one by using a Sphere source and then slicing it. State attached. By changing the resolution of the Sphere, you can change the refinement. Hope that helps Utkarsh On Sat, Jan 27, 2018 at 12:16 PM, Steytler, Louis Louw <steyt...@illinois.edu> wrote: > Utkarsh, > > The attached state file should work with the data I sent. > > Thanks very much, > > Louis Steytler > Department of Mechanical Science and Engineering > University of Illinois at Urbana-Champaign > 1206 West Green Street > Urbana, Il 61801 > steyt...@illinois.edu > ________________________________ > From: ParaView [paraview-boun...@paraview.org] on behalf of Steytler, Louis > Louw [steyt...@illinois.edu] > Sent: 26 January 2018 06:27 AM > To: Utkarsh Ayachit > > Cc: paraview@paraview.org > Subject: Re: [Paraview] Extracting data on the surface of a block? > > Utkarsh, > > I forget, meant to say blocks 1 and 2 represent the drop. I actually > extracted and merged these two in ParaView. > > Will send a state file soon, apologies for late, I have been traveling the > past two days. > > Thanks again, > > Louis Steytler > Department of Mechanical Science and Engineering > University of Illinois at Urbana-Champaign > 1206 West Green Street > Urbana, IL 61801 > steyt...@illinois.edu > > On 24 Jan 2018 8:50 AM, Utkarsh Ayachit <utkarsh.ayac...@kitware.com> wrote: > > Louis, > > Can you also attach a state file for the vis you're generating > currently, so I get a starting point? I am not sure which block is the > oil drop. > > Thanks, > Utkarsh > > On Tue, Jan 23, 2018 at 8:12 PM, Steytler, Louis Louw > <steyt...@illinois.edu> wrote: >> Hi Utkarsh, >> >> My data file is rather large, but here is a link to the data: >> >> https://uofi.box.com/s/u4hpipt8kbo0u3oxhz92xeya75kzf6kd >> >> Please let me know if this is too large and I can try to send a smaller >> version. >> >> I have been using "save data". It seems I have data sets under the >> "Composite Data Set Index" list in the PlotOnIntersection pipeline. >> >> How is "Chart View" selected again? I didn't find it in the "View" drop >> down menu at the top, but I was able to open a new layout and select >> "SpreadSheetView". >> >> Thanks again, >> >> Louis Steytler >> Department of Mechanical Science and Engineering >> University of Illinois at Urbana-Champaign >> 1206 West Green Street >> Urbana, Il 61801 >> steyt...@illinois.edu >> ________________________________________ >> From: Utkarsh Ayachit [utkarsh.ayac...@kitware.com] >> Sent: 23 January 2018 09:32 AM >> To: Steytler, Louis Louw >> Cc: paraview@paraview.org >> Subject: Re: [Paraview] Extracting data on the surface of a block? >> >> By "Export View", I meant "Export Scene" under the "File" menu. >> >> On Tue, Jan 23, 2018 at 10:31 AM, Utkarsh Ayachit >> <utkarsh.ayac...@kitware.com> wrote: >>> Louis, >>> >>>> This seemed to produce reasonable looking results, but I was not able to >>>> specify the number of points along the arc where data was extracted. >>> >>> PlotOnIntersectionCurves essentially slices the dataset using a >>> implicit plane. The points you get are indeed the insection points >>> between your polydata and the plane and hence there's no control over >>> how many points there can be, besides what's determined by your mesh. >>> >>> If you can share the sample data (feel free to do it off the list,if >>> you'd like), I can see what other options may work. >>> >>>>Also, upon saving, three files were produced file0.csv, file1.csv, >>>> file2.csv, and >>>> file3.csv. Not sure why I am not getting just one file? >>> >>> Are you using "save data"? I'd suggest selecting the "Chart View" and >>> then using "Export View" option to export the curves. That will give >>> you a since CSV for the fields you've selected. >>> >>> Utkarsh > > _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: https://paraview.org/mailman/listinfo/paraview
