I don't know it is related or not. I have very similar behavior under 5.4.1. If i save a state and load it later, Polar Axes show up and i need to disable it from the properties panel. Somehow, ParaView loads Polar Axes even if it is not activated in the original pipeline. It might help to find the source of the issue.
Best Regards, --ufuk ----- Original Message ----- From: "Cory Quammen" <cory.quam...@kitware.com> To: "Joe Ping-Lin Hsiao" <phs...@cs.unc.edu> Cc: "paraview" <paraview@paraview.org> Sent: Wednesday, January 31, 2018 6:44:45 PM Subject: Re: [Paraview] Unexpected measurement appears in 5.4.1 but not 5.0.1 Hmm, that's weird. The Polar Axes should be off by default. Do the Polar Axes appear when creating a Sphere source? You should be able to force it off by adding the following line to the loadFile() function in your script: display.PolarAxes.Visibility = 0 HTH, Cory On Tue, Jan 23, 2018 at 4:40 PM, Joe Ping-Lin Hsiao <phs...@cs.unc.edu> wrote: > Yes exactly. > > On Tue, Jan 23, 2018 at 3:47 PM, Cory Quammen <cory.quam...@kitware.com> > wrote: >> >> Hi Joe, >> >> Are you referring to the circular (polar axes) in the image? It says >> 90.0 deg, 45.0 deg., etc. >> >> Thanks, >> Cory >> >> On Tue, Jan 23, 2018 at 3:31 PM, Joe Ping-Lin Hsiao <phs...@cs.unc.edu> >> wrote: >> > The attached image shows the unexpected measure with text. I tested two >> > versions of ParaView and it only happens in 5.4.1 but not 5.0.1. >> > >> > 180 stacks are loaded and set to volume rendering by my Python script, >> > which >> > is also attached. >> > >> > Thanks, >> > Joe >> > >> > _______________________________________________ >> > Powered by www.kitware.com >> > >> > Visit other Kitware open-source projects at >> > http://www.kitware.com/opensource/opensource.html >> > >> > Please keep messages on-topic and check the ParaView Wiki at: >> > http://paraview.org/Wiki/ParaView >> > >> > Search the list archives at: http://markmail.org/search/?q=ParaView >> > >> > Follow this link to subscribe/unsubscribe: >> > https://paraview.org/mailman/listinfo/paraview >> > >> >> >> >> -- >> Cory Quammen >> Staff R&D Engineer >> Kitware, Inc. > > -- Cory Quammen Staff R&D Engineer Kitware, Inc. _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: https://paraview.org/mailman/listinfo/paraview _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: https://paraview.org/mailman/listinfo/paraview