Ufuk, Thanks for the report. Is there a reliable way to reproduce the behavior that you can share?
Best, Cory On Wed, Jan 31, 2018 at 12:16 PM, Ufuk Turuncoglu <u.utku.turunco...@be.itu.edu.tr> wrote: > I don't know it is related or not. I have very similar behavior under 5.4.1. > If i save a state and load it later, Polar Axes show up and i need to disable > it from the properties panel. Somehow, ParaView loads Polar Axes even if it > is not activated in the original pipeline. It might help to find the source > of the issue. > > Best Regards, > > --ufuk > > ----- Original Message ----- > From: "Cory Quammen" <cory.quam...@kitware.com> > To: "Joe Ping-Lin Hsiao" <phs...@cs.unc.edu> > Cc: "paraview" <paraview@paraview.org> > Sent: Wednesday, January 31, 2018 6:44:45 PM > Subject: Re: [Paraview] Unexpected measurement appears in 5.4.1 but not 5.0.1 > > Hmm, that's weird. The Polar Axes should be off by default. Do the > Polar Axes appear when creating a Sphere source? > > You should be able to force it off by adding the following line to the > loadFile() function in your script: > > display.PolarAxes.Visibility = 0 > > HTH, > Cory > > On Tue, Jan 23, 2018 at 4:40 PM, Joe Ping-Lin Hsiao <phs...@cs.unc.edu> wrote: >> Yes exactly. >> >> On Tue, Jan 23, 2018 at 3:47 PM, Cory Quammen <cory.quam...@kitware.com> >> wrote: >>> >>> Hi Joe, >>> >>> Are you referring to the circular (polar axes) in the image? It says >>> 90.0 deg, 45.0 deg., etc. >>> >>> Thanks, >>> Cory >>> >>> On Tue, Jan 23, 2018 at 3:31 PM, Joe Ping-Lin Hsiao <phs...@cs.unc.edu> >>> wrote: >>> > The attached image shows the unexpected measure with text. I tested two >>> > versions of ParaView and it only happens in 5.4.1 but not 5.0.1. >>> > >>> > 180 stacks are loaded and set to volume rendering by my Python script, >>> > which >>> > is also attached. >>> > >>> > Thanks, >>> > Joe >>> > >>> > _______________________________________________ >>> > Powered by www.kitware.com >>> > >>> > Visit other Kitware open-source projects at >>> > http://www.kitware.com/opensource/opensource.html >>> > >>> > Please keep messages on-topic and check the ParaView Wiki at: >>> > http://paraview.org/Wiki/ParaView >>> > >>> > Search the list archives at: http://markmail.org/search/?q=ParaView >>> > >>> > Follow this link to subscribe/unsubscribe: >>> > https://paraview.org/mailman/listinfo/paraview >>> > >>> >>> >>> >>> -- >>> Cory Quammen >>> Staff R&D Engineer >>> Kitware, Inc. >> >> > > > > -- > Cory Quammen > Staff R&D Engineer > Kitware, Inc. > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Search the list archives at: http://markmail.org/search/?q=ParaView > > Follow this link to subscribe/unsubscribe: > https://paraview.org/mailman/listinfo/paraview -- Cory Quammen Staff R&D Engineer Kitware, Inc. _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: https://paraview.org/mailman/listinfo/paraview
