Package: pulseaudio Version: 5.0-13 Severity: important Dear Maintainer,
If playing a sound (may or may not be a prerequisite) when the Pulseaudio daemon is killed and respawned, it will become unusable. Any sounds thereafter experience an extreme latency and small snippets (< 1 second) are looped over and over rapidly. Changing volume becomes difficult as I assume the PA daemon is choked and is struggling to keep up with requests. My reproduction steps: - Run Clementine (output via PulseAudio). - Play song. - Run 'pulseaudio --kill && pulseaudio --start' as user. - Clementine will fail to play anything else and get stuck at around 0:00 or 0:01, with a tiny snippet of the music being played over and over. - Attempt to change volume. The 'volume change' sound in GNOME will loop over and over rapidly and the volume bar and hotkeys will become unresponsive. - Restart PA again. The problem doesn't go away. - Reboot and the problem is fixed, until the next time. This shouldn't happen. Ideally, you should be able to restart PA as many times as you want at whatever speed and never have it become unusable. Snippet from syslog is attached. Thank you, David. -- Package-specific info: File '/etc/default/pulseaudio' does not exist -- System Information: Debian Release: jessie/sid APT prefers testing-updates APT policy: (500, 'testing-updates'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=ga_IE.UTF-8, LC_CTYPE=ga_IE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages pulseaudio depends on: ii adduser 3.113+nmu3 ii libasound2 1.0.28-1 ii libasound2-plugins 1.0.28-1+b1 ii libc6 2.19-13 ii libcap2 1:2.24-6 ii libdbus-1-3 1.8.10-1 ii libfftw3-single3 3.3.4-1.1 ii libgcc1 1:4.9.1-19 ii libice6 2:1.0.9-1 ii libltdl7 2.4.2-1.11 ii liborc-0.4-0 1:0.4.22-1 ii libpulse0 5.0-13 ii libsamplerate0 0.1.8-8 ii libsm6 2:1.2.2-1 ii libsndfile1 1.0.25-9+b1 ii libspeexdsp1 1.2~rc1.2-1 ii libstdc++6 4.9.1-19 ii libsystemd0 215-5+b1 ii libtdb1 1.3.1-1 ii libudev1 215-5+b1 ii libwebrtc-audio-processing-0 0.1-3 ii libx11-6 2:1.6.2-3 ii libx11-xcb1 2:1.6.2-3 ii libxcb1 1.10-3+b1 ii libxtst6 2:1.2.2-1+b1 ii lsb-base 4.1+Debian13+nmu1 ii pulseaudio-utils 5.0-13 ii udev 215-5+b1 Versions of packages pulseaudio recommends: ii pulseaudio-module-x11 5.0-13 ii rtkit 0.11-2 Versions of packages pulseaudio suggests: pn paman <none> pn paprefs <none> ii pavucontrol 2.0-3 pn pavumeter <none> -- Configuration Files: /etc/pulse/default.pa changed: ..nofail ..fail load-module module-device-restore load-module module-stream-restore load-module module-card-restore load-module module-augment-properties load-module module-switch-on-port-available ..ifexists module-udev-detect.so load-module module-udev-detect tsched=0 ..else load-module module-detect tsched=0 ..endif ..ifexists module-jackdbus-detect.so ..nofail load-module module-jackdbus-detect channels=2 ..fail ..endif ..ifexists module-bluetooth-policy.so load-module module-bluetooth-policy ..endif ..ifexists module-bluetooth-discover.so load-module module-bluetooth-discover ..endif ..ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix ..endif load-module module-native-protocol-unix ..ifexists module-gconf.so ..nofail load-module module-gconf ..fail ..endif load-module module-default-device-restore load-module module-rescue-streams load-module module-always-sink load-module module-intended-roles load-module module-suspend-on-idle ..ifexists module-console-kit.so load-module module-console-kit ..endif ..ifexists module-systemd-login.so load-module module-systemd-login ..endif load-module module-position-event-sounds load-module module-role-cork load-module module-filter-heuristics load-module module-filter-apply -- no debconf information
# This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for PulseAudio clients. See pulse-client.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; default-sink = ; default-source = ; default-server = ; default-dbus-server = ; autospawn = yes ; daemon-binary = /usr/bin/pulseaudio ; extra-arguments = --log-target=syslog ; cookie-file = ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; auto-connect-localhost = no ; auto-connect-display = no
# This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify # it under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 # USA. ## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for ## more information. Default values are commented out. Use either ; or # for ## commenting. ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; local-server-type = user ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = /etc/pulse/default.pa ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 # resample-method defaults to speex-float-1 on most architectures, # speex-fixed-1 on ARM ; resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no ; flat-volumes = yes ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; alternate-sample-rate = 48000 ; default-sample-channels = 2 ; default-channel-map = front-left,front-right ; default-fragments = 4 ; default-fragment-size-msec = 25 ; enable-deferred-volume = yes ; deferred-volume-safety-margin-usec = 8000 ; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software Foundation, # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. # This startup script is used only if PulseAudio is started per-user # (i.e. not in system mode) ..nofail ### Load something into the sample cache #load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav #load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav #load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav #load-sample-lazy pulse-access /usr/share/sounds/generic.wav ..fail ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore load-module module-card-restore ### Automatically augment property information from .desktop files ### stored in /usr/share/application load-module module-augment-properties ### Should be after module-*-restore but before module-*-detect load-module module-switch-on-port-available ### Load audio drivers statically ### (it's probably better to not load these drivers manually, but instead ### use module-udev-detect -- see below -- for doing this automatically) #load-module module-alsa-sink #load-module module-alsa-source device=hw:1,0 #load-module module-oss device="/dev/dsp" sink_name=output source_name=input #load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input #load-module module-null-sink #load-module module-pipe-sink ### Automatically load driver modules depending on the hardware available ..ifexists module-udev-detect.so load-module module-udev-detect tsched=0 ..else ### Use the static hardware detection module (for systems that lack udev support) load-module module-detect tsched=0 ..endif ### Automatically connect sink and source if JACK server is present ..ifexists module-jackdbus-detect.so ..nofail load-module module-jackdbus-detect channels=2 ..fail ..endif ### Automatically load driver modules for Bluetooth hardware ..ifexists module-bluetooth-policy.so load-module module-bluetooth-policy ..endif ..ifexists module-bluetooth-discover.so load-module module-bluetooth-discover ..endif ### Load several protocols ..ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix ..endif load-module module-native-protocol-unix ### Network access (may be configured with paprefs, so leave this commented ### here if you plan to use paprefs) #load-module module-esound-protocol-tcp #load-module module-native-protocol-tcp #load-module module-zeroconf-publish ### Load the RTP receiver module (also configured via paprefs, see above) #load-module module-rtp-recv ### Load the RTP sender module (also configured via paprefs, see above) #load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'" #load-module module-rtp-send source=rtp.monitor ### Load additional modules from GConf settings. This can be configured with the paprefs tool. ### Please keep in mind that the modules configured by paprefs might conflict with manually ### loaded modules. ..ifexists module-gconf.so ..nofail load-module module-gconf ..fail ..endif ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Honour intended role device property load-module module-intended-roles ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### If autoexit on idle is enabled we want to make sure we only quit ### when no local session needs us anymore. ..ifexists module-console-kit.so load-module module-console-kit ..endif ..ifexists module-systemd-login.so load-module module-systemd-login ..endif ### Enable positioned event sounds load-module module-position-event-sounds ### Cork music/video streams when a phone stream is active load-module module-role-cork ### Modules to allow autoloading of filters (such as echo cancellation) ### on demand. module-filter-heuristics tries to determine what filters ### make sense, and module-filter-apply does the heavy-lifting of ### loading modules and rerouting streams. load-module module-filter-heuristics load-module module-filter-apply # X11 modules should not be started from default.pa so that one daemon # can be shared by multiple sessions. ### Load X11 bell module #load-module module-x11-bell sample=bell-windowing-system ### Register ourselves in the X11 session manager #load-module module-x11-xsmp ### Publish connection data in the X11 root window #.ifexists module-x11-publish.so #.nofail #load-module module-x11-publish #.fail #.endif ### Make some devices default #set-default-sink output #set-default-source input
#!/usr/bin/pulseaudio -nF # # This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify it # under the terms of the GNU Lesser General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # PulseAudio is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU Lesser General Public License # along with PulseAudio; if not, write to the Free Software Foundation, # Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. # This startup script is used only if PulseAudio is started in system # mode. ### Automatically load driver modules depending on the hardware available ..ifexists module-udev-detect.so load-module module-udev-detect ..else ### Use the static hardware detection module (for systems that lack udev/hal support) load-module module-detect ..endif ### Load several protocols ..ifexists module-esound-protocol-unix.so load-module module-esound-protocol-unix ..endif load-module module-native-protocol-unix ### Automatically restore the volume of streams and devices load-module module-stream-restore load-module module-device-restore ### Automatically restore the default sink/source when changed by the user ### during runtime ### NOTE: This should be loaded as early as possible so that subsequent modules ### that look up the default sink/source get the right value load-module module-default-device-restore ### Automatically move streams to the default sink if the sink they are ### connected to dies, similar for sources load-module module-rescue-streams ### Make sure we always have a sink around, even if it is a null sink. load-module module-always-sink ### Automatically suspend sinks/sources that become idle for too long load-module module-suspend-on-idle ### Enable positioned event sounds load-module module-position-event-sounds
default Playback/recording through the PulseAudio sound server null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server hdmi:CARD=Generic,DEV=0 HD-Audio Generic, HDMI 0 HDMI Audio Output dmix:CARD=Generic,DEV=3 HD-Audio Generic, HDMI 0 Direct sample mixing device dsnoop:CARD=Generic,DEV=3 HD-Audio Generic, HDMI 0 Direct sample snooping device hw:CARD=Generic,DEV=3 HD-Audio Generic, HDMI 0 Direct hardware device without any conversions plughw:CARD=Generic,DEV=3 HD-Audio Generic, HDMI 0 Hardware device with all software conversions sysdefault:CARD=Generic_1 HD-Audio Generic, CX20756 Analog Default Audio Device front:CARD=Generic_1,DEV=0 HD-Audio Generic, CX20756 Analog Front speakers surround21:CARD=Generic_1,DEV=0 HD-Audio Generic, CX20756 Analog 2.1 Surround output to Front and Subwoofer speakers surround40:CARD=Generic_1,DEV=0 HD-Audio Generic, CX20756 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Generic_1,DEV=0 HD-Audio Generic, CX20756 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Generic_1,DEV=0 HD-Audio Generic, CX20756 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Generic_1,DEV=0 HD-Audio Generic, CX20756 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Generic_1,DEV=0 HD-Audio Generic, CX20756 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers dmix:CARD=Generic_1,DEV=0 HD-Audio Generic, CX20756 Analog Direct sample mixing device dsnoop:CARD=Generic_1,DEV=0 HD-Audio Generic, CX20756 Analog Direct sample snooping device hw:CARD=Generic_1,DEV=0 HD-Audio Generic, CX20756 Analog Direct hardware device without any conversions plughw:CARD=Generic_1,DEV=0 HD-Audio Generic, CX20756 Analog Hardware device with all software conversions
Card #0 Name: alsa_card.pci-0000_00_01.1 Driver: module-alsa-card.c Owner Module: 6 Properties: alsa.card = "0" alsa.card_name = "HD-Audio Generic" alsa.long_card_name = "HD-Audio Generic at 0xf1560000 irq 85" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:01.1" sysfs.path = "/devices/pci0000:00/0000:00:01.1/sound/card0" device.bus = "pci" device.vendor.id = "1002" device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]" device.product.id = "9840" device.product.name = "Kabini HDMI/DP Audio" device.form_factor = "internal" device.string = "0" device.description = "Built-in Audio" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Profiles: output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1, sources: 0, priority: 5400, available: yes) off: Off (sinks: 0, sources: 0, priority: 0, available: yes) Active Profile: output:hdmi-stereo Ports: hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency offset: 0 usec, not available) Properties: device.icon_name = "video-display" Part of profile(s): output:hdmi-stereo Card #1 Name: alsa_card.pci-0000_00_14.2 Driver: module-alsa-card.c Owner Module: 7 Properties: alsa.card = "1" alsa.card_name = "HD-Audio Generic" alsa.long_card_name = "HD-Audio Generic at 0xf1564000 irq 86" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:14.2" sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1" device.bus = "pci" device.vendor.id = "1022" device.vendor.name = "Advanced Micro Devices, Inc. [AMD]" device.product.id = "780d" device.product.name = "FCH Azalia Controller" device.form_factor = "internal" device.string = "1" device.description = "Built-in Audio" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Profiles: input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1, priority: 60, available: yes) output:analog-stereo: Analog Stereo Output (sinks: 1, sources: 0, priority: 6000, available: yes) output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (sinks: 1, sources: 1, priority: 6060, available: yes) off: Off (sinks: 0, sources: 0, priority: 0, available: yes) Active Profile: output:analog-stereo+input:analog-stereo Ports: analog-input-internal-mic: Internal Microphone (priority: 8900, latency offset: 0 usec, not available) Properties: device.icon_name = "audio-input-microphone" Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo analog-input-mic: Microphone (priority: 8700, latency offset: 0 usec, available) Properties: device.icon_name = "audio-input-microphone" Part of profile(s): input:analog-stereo, output:analog-stereo+input:analog-stereo analog-output: Analog Output (priority: 9900, latency offset: 0 usec) Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo analog-output-speaker: Speakers (priority: 10000, latency offset: 0 usec, not available) Properties: device.icon_name = "audio-speakers" Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo analog-output-headphones: Headphones (priority: 9000, latency offset: 0 usec, available) Properties: device.icon_name = "audio-headphones" Part of profile(s): output:analog-stereo, output:analog-stereo+input:analog-stereo
Sink #0 State: IDLE Name: alsa_output.pci-0000_00_01.1.hdmi-stereo Description: Built-in Audio Digital Stereo (HDMI) Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 6 Mute: no Volume: front-left: 64071 / 98% / -0.59 dB, front-right: 64071 / 98% / -0.59 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor Source: alsa_output.pci-0000_00_01.1.hdmi-stereo.monitor Latency: 100112 usec, configured 100136 usec Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS Properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "HDMI 0" alsa.id = "HDMI 0" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "3" alsa.card = "0" alsa.card_name = "HD-Audio Generic" alsa.long_card_name = "HD-Audio Generic at 0xf1560000 irq 85" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:01.1" sysfs.path = "/devices/pci0000:00/0000:00:01.1/sound/card0" device.bus = "pci" device.vendor.id = "1002" device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]" device.product.id = "9840" device.product.name = "Kabini HDMI/DP Audio" device.form_factor = "internal" device.string = "hdmi:0" device.buffering.buffer_size = "17664" device.buffering.fragment_size = "2944" device.access_mode = "mmap" device.profile.name = "hdmi-stereo" device.profile.description = "Digital Stereo (HDMI)" device.description = "Built-in Audio Digital Stereo (HDMI)" alsa.mixer_name = "ATI R6xx HDMI" alsa.components = "HDA:1002aa01,00aa0100,00100500" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Ports: hdmi-output-0: HDMI / DisplayPort (priority: 5900, not available) Active Port: hdmi-output-0 Formats: pcm Sink #1 State: RUNNING Name: alsa_output.pci-0000_00_14.2.analog-stereo Description: Built-in Audio Analog Stereo Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 7 Mute: yes Volume: front-left: 0 / 0% / -inf dB, front-right: 0 / 0% / -inf dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor Source: alsa_output.pci-0000_00_14.2.analog-stereo.monitor Latency: 0 usec, configured 100136 usec Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY Properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "CX20756 Analog" alsa.id = "CX20756 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "1" alsa.card_name = "HD-Audio Generic" alsa.long_card_name = "HD-Audio Generic at 0xf1564000 irq 86" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:14.2" sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1" device.bus = "pci" device.vendor.id = "1022" device.vendor.name = "Advanced Micro Devices, Inc. [AMD]" device.product.id = "780d" device.product.name = "FCH Azalia Controller" device.form_factor = "internal" device.string = "front:1" device.buffering.buffer_size = "17664" device.buffering.fragment_size = "2944" device.access_mode = "mmap" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Built-in Audio Analog Stereo" alsa.mixer_name = "Conexant CX20756" alsa.components = "HDA:14f15114,1179f920,00100100" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Ports: analog-output: Analog Output (priority: 9900) analog-output-speaker: Speakers (priority: 10000, not available) analog-output-headphones: Headphones (priority: 9000, available) Active Port: analog-output-headphones Formats: pcm
Source #0 State: RUNNING Name: alsa_output.pci-0000_00_01.1.hdmi-stereo.monitor Description: Monitor of Built-in Audio Digital Stereo (HDMI) Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 6 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: alsa_output.pci-0000_00_01.1.hdmi-stereo Latency: 0 usec, configured 100136 usec Flags: DECIBEL_VOLUME LATENCY Properties: device.description = "Monitor of Built-in Audio Digital Stereo (HDMI)" device.class = "monitor" alsa.card = "0" alsa.card_name = "HD-Audio Generic" alsa.long_card_name = "HD-Audio Generic at 0xf1560000 irq 85" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:01.1" sysfs.path = "/devices/pci0000:00/0000:00:01.1/sound/card0" device.bus = "pci" device.vendor.id = "1002" device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]" device.product.id = "9840" device.product.name = "Kabini HDMI/DP Audio" device.form_factor = "internal" device.string = "0" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Formats: pcm Source #1 State: RUNNING Name: alsa_output.pci-0000_00_14.2.analog-stereo.monitor Description: Monitor of Built-in Audio Analog Stereo Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 7 Mute: no Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB balance 0.00 Base Volume: 65536 / 100% / 0.00 dB Monitor of Sink: alsa_output.pci-0000_00_14.2.analog-stereo Latency: 0 usec, configured 100136 usec Flags: DECIBEL_VOLUME LATENCY Properties: device.description = "Monitor of Built-in Audio Analog Stereo" device.class = "monitor" alsa.card = "1" alsa.card_name = "HD-Audio Generic" alsa.long_card_name = "HD-Audio Generic at 0xf1564000 irq 86" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:14.2" sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1" device.bus = "pci" device.vendor.id = "1022" device.vendor.name = "Advanced Micro Devices, Inc. [AMD]" device.product.id = "780d" device.product.name = "FCH Azalia Controller" device.form_factor = "internal" device.string = "1" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Formats: pcm Source #2 State: RUNNING Name: alsa_input.pci-0000_00_14.2.analog-stereo Description: Built-in Audio Analog Stereo Driver: module-alsa-card.c Sample Specification: s16le 2ch 44100Hz Channel Map: front-left,front-right Owner Module: 7 Mute: no Volume: front-left: 16462 / 25% / -36.00 dB, front-right: 16462 / 25% / -36.00 dB balance 0.00 Base Volume: 13076 / 20% / -42.00 dB Monitor of Sink: n/a Latency: 1696258 usec, configured 100136 usec Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY Properties: alsa.resolution_bits = "16" device.api = "alsa" device.class = "sound" alsa.class = "generic" alsa.subclass = "generic-mix" alsa.name = "CX20756 Analog" alsa.id = "CX20756 Analog" alsa.subdevice = "0" alsa.subdevice_name = "subdevice #0" alsa.device = "0" alsa.card = "1" alsa.card_name = "HD-Audio Generic" alsa.long_card_name = "HD-Audio Generic at 0xf1564000 irq 86" alsa.driver_name = "snd_hda_intel" device.bus_path = "pci-0000:00:14.2" sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1" device.bus = "pci" device.vendor.id = "1022" device.vendor.name = "Advanced Micro Devices, Inc. [AMD]" device.product.id = "780d" device.product.name = "FCH Azalia Controller" device.form_factor = "internal" device.string = "front:1" device.buffering.buffer_size = "17664" device.buffering.fragment_size = "2944" device.access_mode = "mmap" device.profile.name = "analog-stereo" device.profile.description = "Analog Stereo" device.description = "Built-in Audio Analog Stereo" alsa.mixer_name = "Conexant CX20756" alsa.components = "HDA:14f15114,1179f920,00100100" module-udev-detect.discovered = "1" device.icon_name = "audio-card-pci" Ports: analog-input-internal-mic: Internal Microphone (priority: 8900, not available) analog-input-mic: Microphone (priority: 8700, available) Active Port: analog-input-mic Formats: pcm
Module #0 Name: module-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute state of devices" module.version = "5.0" Module #1 Name: module-stream-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the volume/mute/device state of streams" module.version = "5.0" Module #2 Name: module-card-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore profile of cards" module.version = "5.0" Module #3 Name: module-augment-properties Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Augment the property sets of streams with additional static information" module.version = "5.0" Module #4 Name: module-switch-on-port-available Argument: Usage counter: n/a Properties: Module #5 Name: module-udev-detect Argument: tsched=0 Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Detect available audio hardware and load matching drivers" module.version = "5.0" Module #6 Name: module-alsa-card Argument: device_id="0" name="pci-0000_00_01.1" card_name="alsa_card.pci-0000_00_01.1" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1" Usage counter: 2 Properties: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "5.0" Module #7 Name: module-alsa-card Argument: device_id="1" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=no fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1" Usage counter: 4 Properties: module.author = "Lennart Poettering" module.description = "ALSA Card" module.version = "5.0" Module #8 Name: module-native-protocol-unix Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Native protocol (UNIX sockets)" module.version = "5.0" Module #9 Name: module-default-device-restore Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically restore the default sink and source" module.version = "5.0" Module #10 Name: module-rescue-streams Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "When a sink/source is removed, try to move its streams to the default sink/source" module.version = "5.0" Module #11 Name: module-always-sink Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Always keeps at least one sink loaded even if it's a null one" module.version = "5.0" Module #12 Name: module-intended-roles Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Automatically set device of streams based on intended roles of devices" module.version = "5.0" Module #13 Name: module-suspend-on-idle Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "When a sink/source is idle for too long, suspend it" module.version = "5.0" Module #14 Name: module-console-kit Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Create a client for each ConsoleKit session of this user" module.version = "5.0" Module #15 Name: module-systemd-login Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Create a client for each login session of this user" module.version = "5.0" Module #16 Name: module-position-event-sounds Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Position event sounds between L and R depending on the position on screen of the widget triggering them." module.version = "5.0" Module #17 Name: module-role-cork Argument: Usage counter: n/a Properties: module.author = "Lennart Poettering" module.description = "Mute & cork streams with certain roles while others exist" module.version = "5.0" Module #18 Name: module-filter-heuristics Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Detect when various filters are desirable" module.version = "5.0" Module #19 Name: module-filter-apply Argument: Usage counter: n/a Properties: module.author = "Colin Guthrie" module.description = "Load filter sinks automatically when needed" module.version = "5.0"
Server String: /run/user/1000/pulse/native Library Protocol Version: 29 Server Protocol Version: 29 Is Local: yes Client Index: 20 Tile Size: 65472 User Name: david Host Name: fuileach Server Name: pulseaudio Server Version: 5.0 Default Sample Specification: s16le 2ch 44100Hz Default Channel Map: front-left,front-right Default Sink: alsa_output.pci-0000_00_14.2.analog-stereo Default Source: alsa_input.pci-0000_00_14.2.analog-stereo Cookie: 21a7:9489
Nov 26 19:37:38 fuileach pulseaudio[4226]: Requested to rewind 17664 bytes. Nov 26 19:37:38 fuileach pulseaudio[4226]: Limited to 17112 bytes. Nov 26 19:37:38 fuileach pulseaudio[4226]: before: 4278 Nov 26 19:37:38 fuileach pulseaudio[4226]: after: 4278 Nov 26 19:37:38 fuileach pulseaudio[4226]: Rewound 17112 bytes. Nov 26 19:37:38 fuileach pulseaudio[4226]: Processing rewind... Nov 26 19:37:38 fuileach pulseaudio[4226]: latency = 0 Nov 26 19:37:38 fuileach pulseaudio[4226]: Volume change to 15618 at 254052604 was written 8001 usec late Nov 26 19:37:38 fuileach pulseaudio[4226]: Processing rewind... Nov 26 19:37:38 fuileach pulseaudio[4226]: Dropped redundant event due to change event. Nov 26 19:37:44 fuileach pulseaudio[4226]: Client gnome-shell changes volume of sink alsa_output.pci-0000_00_14.2.analog-stereo. Nov 26 19:37:44 fuileach pulseaudio[4226]: Requested volume: front-left: 23086 / 35% / -27.19 dB, front-right: 23086 / 35% / -27.19 dB Nov 26 19:37:44 fuileach pulseaudio[4226]: Got hardware volume: front-left: 23253 / 35% / -27.00 dB, front-right: 23253 / 35% / -27.00 dB Nov 26 19:37:44 fuileach pulseaudio[4226]: Calculated software volume: front-left: 65065 / 99% / -0.19 dB, front-right: 65065 / 99% / -0.19 dB (accurate-enough=yes) Nov 26 19:37:44 fuileach pulseaudio[4226]: Volume going up to 23086 at 259907120 Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7975 usec Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7929 usec Nov 26 19:37:44 fuileach pulseaudio[4226]: Storing volume/mute for device+port sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output-headphones. Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7559 usec Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7478 usec Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7456 usec Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7409 usec Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7339 usec Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7300 usec Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7279 usec Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 6994 usec Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 6677 usec Nov 26 19:37:44 fuileach pulseaudio[4226]: Volume change to 23086 at 259907120 was written 45 usec late Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 364 bytes ago (17300 bytes ahead in playback buffer) Nov 26 19:37:46 fuileach pulseaudio[4226]: Requested volume: front-left: 23496 / 36% / -26.73 dB, front-right: 23496 / 36% / -26.73 dB Nov 26 19:37:46 fuileach pulseaudio[4226]: Got hardware volume: front-left: 23613 / 36% / -26.60 dB, front-right: 23613 / 36% / -26.60 dB Nov 26 19:37:46 fuileach pulseaudio[4226]: Calculated software volume: front-left: 65211 / 100% / -0.13 dB, front-right: 65211 / 100% / -0.13 dB (accurate-enough=yes) Nov 26 19:37:46 fuileach pulseaudio[4226]: Volume going up to 23496 at 261920446 Nov 26 19:37:46 fuileach pulseaudio[4226]: Requested to rewind 17664 bytes. Nov 26 19:37:46 fuileach pulseaudio[4226]: Limited to 17364 bytes. Nov 26 19:37:46 fuileach pulseaudio[4226]: before: 4341 Nov 26 19:37:46 fuileach pulseaudio[4226]: after: 4341 Nov 26 19:37:46 fuileach pulseaudio[4226]: Rewound 17364 bytes. Nov 26 19:37:46 fuileach pulseaudio[4226]: Processing rewind... Nov 26 19:37:46 fuileach pulseaudio[4226]: latency = 0 Nov 26 19:37:46 fuileach pulseaudio[4226]: Processing rewind... Nov 26 19:37:46 fuileach pulseaudio[4226]: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds. Nov 26 19:37:46 fuileach pulseaudio[4226]: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds. Nov 26 19:37:46 fuileach pulseaudio[4226]: Hmm, no streams around, trying to vacuum. Nov 26 19:37:46 fuileach pulseaudio[4226]: Freeing input 0 "bell-window-system" Nov 26 19:37:46 fuileach pulseaudio[4226]: Restoring device for stream sink-input-by-media-role:event. Nov 26 19:37:46 fuileach pulseaudio[4226]: Not setting device for stream audio-volume-change, because already set. Nov 26 19:37:46 fuileach pulseaudio[4226]: Negotiated format: pcm, format.sample_format = "\"s16le\"" format.rate = "44100" format.channels = "2" format.channel_map = "\"front-left,front-right\"" Nov 26 19:37:46 fuileach pulseaudio[4226]: Restoring volume for sink input sink-input-by-media-role:event. Nov 26 19:37:46 fuileach pulseaudio[4226]: Restoring mute state for sink input sink-input-by-media-role:event. Nov 26 19:37:46 fuileach pulseaudio[4226]: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming. Nov 26 19:37:46 fuileach pulseaudio[4226]: Sink alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds. Nov 26 19:37:46 fuileach pulseaudio[4226]: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0 Nov 26 19:37:46 fuileach pulseaudio[4226]: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0 Nov 26 19:37:46 fuileach pulseaudio[4226]: Created input 1 "audio-volume-change" on alsa_output.pci-0000_00_14.2.analog-stereo with sample spec s16le 2ch 44100Hz and channel map front-left,front-right Nov 26 19:37:46 fuileach pulseaudio[4226]: event.mouse.button = "1" Nov 26 19:37:46 fuileach pulseaudio[4226]: event.mouse.y = "61" Nov 26 19:37:46 fuileach pulseaudio[4226]: event.mouse.x = "1171" Nov 26 19:37:46 fuileach pulseaudio[4226]: event.description = "Athraíodh an airde" Nov 26 19:37:46 fuileach pulseaudio[4226]: event.id = "audio-volume-change" Nov 26 19:37:46 fuileach pulseaudio[4226]: media.role = "event" Nov 26 19:37:46 fuileach pulseaudio[4226]: media.name = "audio-volume-change" Nov 26 19:37:46 fuileach pulseaudio[4226]: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga" Nov 26 19:37:46 fuileach pulseaudio[4226]: Volume change to 23496 at 261920446 was written 31 usec late Nov 26 19:37:46 fuileach pulseaudio[4226]: application.name = "GNOME Shell" Nov 26 19:37:46 fuileach pulseaudio[4226]: Written HW volume did not match with the request: front-left: 23496 / 36% / -26.73 dB, front-right: 23496 / 36% / -26.73 dB (request) != front-left: 23253 / 35% / -27.00 dB, front-right: 23253 / 35% / -27.00 dB Nov 26 19:37:46 fuileach pulseaudio[4226]: native-protocol.peer = "UNIX socket client" Nov 26 19:37:46 fuileach pulseaudio[4226]: native-protocol.version = "29" Nov 26 19:37:46 fuileach pulseaudio[4226]: application.id = "org.gnome.Shell" Nov 26 19:37:46 fuileach pulseaudio[4226]: application.icon_name = "start-here" Nov 26 19:37:46 fuileach pulseaudio[4226]: application.language = "ga_IE.UTF-8" Nov 26 19:37:46 fuileach pulseaudio[4226]: window.x11.screen = "0" Nov 26 19:37:46 fuileach pulseaudio[4226]: window.x11.display = ":0" Nov 26 19:37:46 fuileach pulseaudio[4226]: application.process.id = "2224" Nov 26 19:37:46 fuileach pulseaudio[4226]: application.process.user = "david" Nov 26 19:37:46 fuileach pulseaudio[4226]: application.process.host = "fuileach" Nov 26 19:37:46 fuileach pulseaudio[4226]: application.process.binary = "gnome-shell" Nov 26 19:37:46 fuileach pulseaudio[4226]: application.process.machine_id = "fb75a029cab0d31b5676ade754660933" Nov 26 19:37:46 fuileach pulseaudio[4226]: application.process.session_id = "1" Nov 26 19:37:46 fuileach pulseaudio[4226]: module-stream-restore.id = "sink-input-by-media-role:event" Nov 26 19:37:46 fuileach pulseaudio[4226]: Requested tlength=2000.00 ms, minreq=20.00 ms Nov 26 19:37:46 fuileach pulseaudio[4226]: Traditional mode enabled, modifying sink usec only for compat with minreq. Nov 26 19:37:46 fuileach pulseaudio[4226]: Requested latency=1960.00 ms, Received latency=100.14 ms Nov 26 19:37:46 fuileach pulseaudio[4226]: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0 Nov 26 19:37:46 fuileach pulseaudio[4226]: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0 Nov 26 19:37:46 fuileach pulseaudio[4226]: Final latency 2100.14 ms = 1960.00 ms + 2*20.00 ms + 100.14 ms Nov 26 19:37:46 fuileach pulseaudio[4226]: Requested volume: front-left: 23086 / 35% / -27.19 dB, front-right: 23086 / 35% / -27.19 dB Nov 26 19:37:46 fuileach pulseaudio[4226]: Got hardware volume: front-left: 23253 / 35% / -27.00 dB, front-right: 23253 / 35% / -27.00 dB Nov 26 19:37:46 fuileach pulseaudio[4226]: Calculated software volume: front-left: 65065 / 99% / -0.19 dB, front-right: 65065 / 99% / -0.19 dB (accurate-enough=yes) Nov 26 19:37:46 fuileach pulseaudio[4226]: Volume going down to 23086 at 261922724 Nov 26 19:37:46 fuileach pulseaudio[4226]: Volume change to 23086 at 261922724 was written 8344 usec late Nov 26 19:37:46 fuileach pulseaudio[4226]: Requesting rewind due to end of underrun. Nov 26 19:37:46 fuileach pulseaudio[4226]: Requested to rewind 17664 bytes. Nov 26 19:37:46 fuileach pulseaudio[4226]: Limited to 17396 bytes. Nov 26 19:37:46 fuileach pulseaudio[4226]: before: 4349 Nov 26 19:37:46 fuileach pulseaudio[4226]: after: 4349 Nov 26 19:37:46 fuileach pulseaudio[4226]: Rewound 17396 bytes. Nov 26 19:37:46 fuileach pulseaudio[4226]: Processing rewind... Nov 26 19:37:46 fuileach pulseaudio[4226]: latency = 0 Nov 26 19:37:46 fuileach pulseaudio[4226]: Have to rewind 17396 bytes on render memblockq. Nov 26 19:37:46 fuileach pulseaudio[4226]: Processing rewind... Nov 26 19:37:46 fuileach pulseaudio[4226]: Implicit drain of 'audio-volume-change' Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 5952 bytes ago (11712 bytes ahead in playback buffer) Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9192 bytes ago (8472 bytes ahead in playback buffer) Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9220 bytes ago (8444 bytes ahead in playback buffer) Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9236 bytes ago (8428 bytes ahead in playback buffer) Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9252 bytes ago (8412 bytes ahead in playback buffer) Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9304 bytes ago (8360 bytes ahead in playback buffer) Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9320 bytes ago (8344 bytes ahead in playback buffer) Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9340 bytes ago (8324 bytes ahead in playback buffer) Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9352 bytes ago (8312 bytes ahead in playback buffer) Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9368 bytes ago (8296 bytes ahead in playback buffer)
_______________________________________________ pkg-pulseaudio-devel mailing list pkg-pulseaudio-devel@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-pulseaudio-devel