--- Begin Message ---
Package: pulseaudio
Version: 5.0-13
Severity: important
Dear Maintainer,
If playing a sound (may or may not be a prerequisite) when the Pulseaudio
daemon is killed and respawned, it will become unusable. Any sounds thereafter
experience an extreme latency and small snippets (< 1 second) are looped over
and over rapidly. Changing volume becomes difficult as I assume the PA daemon
is choked and is struggling to keep up with requests.
My reproduction steps:
- Run Clementine (output via PulseAudio).
- Play song.
- Run 'pulseaudio --kill && pulseaudio --start' as user.
- Clementine will fail to play anything else and get stuck at around 0:00 or
0:01, with a tiny snippet of the music being played over and over.
- Attempt to change volume. The 'volume change' sound in GNOME will loop over
and over rapidly and the volume bar and hotkeys will become unresponsive.
- Restart PA again. The problem doesn't go away.
- Reboot and the problem is fixed, until the next time.
This shouldn't happen. Ideally, you should be able to restart PA as many times
as you want at whatever speed and never have it become unusable.
Snippet from syslog is attached.
Thank you,
David.
-- Package-specific info:
File '/etc/default/pulseaudio' does not exist
-- System Information:
Debian Release: jessie/sid
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=ga_IE.UTF-8, LC_CTYPE=ga_IE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages pulseaudio depends on:
ii adduser 3.113+nmu3
ii libasound2 1.0.28-1
ii libasound2-plugins 1.0.28-1+b1
ii libc6 2.19-13
ii libcap2 1:2.24-6
ii libdbus-1-3 1.8.10-1
ii libfftw3-single3 3.3.4-1.1
ii libgcc1 1:4.9.1-19
ii libice6 2:1.0.9-1
ii libltdl7 2.4.2-1.11
ii liborc-0.4-0 1:0.4.22-1
ii libpulse0 5.0-13
ii libsamplerate0 0.1.8-8
ii libsm6 2:1.2.2-1
ii libsndfile1 1.0.25-9+b1
ii libspeexdsp1 1.2~rc1.2-1
ii libstdc++6 4.9.1-19
ii libsystemd0 215-5+b1
ii libtdb1 1.3.1-1
ii libudev1 215-5+b1
ii libwebrtc-audio-processing-0 0.1-3
ii libx11-6 2:1.6.2-3
ii libx11-xcb1 2:1.6.2-3
ii libxcb1 1.10-3+b1
ii libxtst6 2:1.2.2-1+b1
ii lsb-base 4.1+Debian13+nmu1
ii pulseaudio-utils 5.0-13
ii udev 215-5+b1
Versions of packages pulseaudio recommends:
ii pulseaudio-module-x11 5.0-13
ii rtkit 0.11-2
Versions of packages pulseaudio suggests:
pn paman <none>
pn paprefs <none>
ii pavucontrol 2.0-3
pn pavumeter <none>
-- Configuration Files:
/etc/pulse/default.pa changed:
..nofail
..fail
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-switch-on-port-available
..ifexists module-udev-detect.so
load-module module-udev-detect tsched=0
..else
load-module module-detect tsched=0
..endif
..ifexists module-jackdbus-detect.so
..nofail
load-module module-jackdbus-detect channels=2
..fail
..endif
..ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
..endif
..ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
..endif
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
..ifexists module-gconf.so
..nofail
load-module module-gconf
..fail
..endif
load-module module-default-device-restore
load-module module-rescue-streams
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
..ifexists module-console-kit.so
load-module module-console-kit
..endif
..ifexists module-systemd-login.so
load-module module-systemd-login
..endif
load-module module-position-event-sounds
load-module module-role-cork
load-module module-filter-heuristics
load-module module-filter-apply
-- no debconf information
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; default-sink =
; default-source =
; default-server =
; default-dbus-server =
; autospawn = yes
; daemon-binary = /usr/bin/pulseaudio
; extra-arguments = --log-target=syslog
; cookie-file =
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; auto-connect-localhost = no
; auto-connect-display = no
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify
# it under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
# USA.
## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
## more information. Default values are commented out. Use either ; or # for
## commenting.
; daemonize = no
; fail = yes
; allow-module-loading = yes
; allow-exit = yes
; use-pid-file = yes
; system-instance = no
; local-server-type = user
; enable-shm = yes
; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64
MiB
; lock-memory = no
; cpu-limit = no
; high-priority = yes
; nice-level = -11
; realtime-scheduling = yes
; realtime-priority = 5
; exit-idle-time = 20
; scache-idle-time = 20
; dl-search-path = (depends on architecture)
; load-default-script-file = yes
; default-script-file = /etc/pulse/default.pa
; log-target = auto
; log-level = notice
; log-meta = no
; log-time = no
; log-backtrace = 0
# resample-method defaults to speex-float-1 on most architectures,
# speex-fixed-1 on ARM
; resample-method = speex-float-1
; enable-remixing = yes
; enable-lfe-remixing = no
; flat-volumes = yes
; rlimit-fsize = -1
; rlimit-data = -1
; rlimit-stack = -1
; rlimit-core = -1
; rlimit-as = -1
; rlimit-rss = -1
; rlimit-nproc = -1
; rlimit-nofile = 256
; rlimit-memlock = -1
; rlimit-locks = -1
; rlimit-sigpending = -1
; rlimit-msgqueue = -1
; rlimit-nice = 31
; rlimit-rtprio = 9
; rlimit-rttime = 1000000
; default-sample-format = s16le
; default-sample-rate = 44100
; alternate-sample-rate = 48000
; default-sample-channels = 2
; default-channel-map = front-left,front-right
; default-fragments = 4
; default-fragment-size-msec = 25
; enable-deferred-volume = yes
; deferred-volume-safety-margin-usec = 8000
; deferred-volume-extra-delay-usec = 0
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)
..nofail
### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav
..fail
### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties
### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available
### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output
source_name=input
#load-module module-null-sink
#load-module module-pipe-sink
### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect tsched=0
..else
### Use the static hardware detection module (for systems that lack udev
support)
load-module module-detect tsched=0
..endif
### Automatically connect sink and source if JACK server is present
..ifexists module-jackdbus-detect.so
..nofail
load-module module-jackdbus-detect channels=2
..fail
..endif
### Automatically load driver modules for Bluetooth hardware
..ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
..endif
..ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
..endif
### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish
### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv
### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100
sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor
### Load additional modules from GConf settings. This can be configured with
the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict
with manually
### loaded modules.
..ifexists module-gconf.so
..nofail
load-module module-gconf
..fail
..endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
..ifexists module-console-kit.so
load-module module-console-kit
..endif
..ifexists module-systemd-login.so
load-module module-systemd-login
..endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply
# X11 modules should not be started from default.pa so that one daemon
# can be shared by multiple sessions.
### Load X11 bell module
#load-module module-x11-bell sample=bell-windowing-system
### Register ourselves in the X11 session manager
#load-module module-x11-xsmp
### Publish connection data in the X11 root window
#.ifexists module-x11-publish.so
#.nofail
#load-module module-x11-publish
#.fail
#.endif
### Make some devices default
#set-default-sink output
#set-default-source input
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
# This startup script is used only if PulseAudio is started in system
# mode.
### Automatically load driver modules depending on the hardware available
..ifexists module-udev-detect.so
load-module module-udev-detect
..else
### Use the static hardware detection module (for systems that lack udev/hal
support)
load-module module-detect
..endif
### Load several protocols
..ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
..endif
load-module module-native-protocol-unix
### Automatically restore the volume of streams and devices
load-module module-stream-restore
load-module module-device-restore
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### Enable positioned event sounds
load-module module-position-event-sounds
default
Playback/recording through the PulseAudio sound server
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
hdmi:CARD=Generic,DEV=0
HD-Audio Generic, HDMI 0
HDMI Audio Output
dmix:CARD=Generic,DEV=3
HD-Audio Generic, HDMI 0
Direct sample mixing device
dsnoop:CARD=Generic,DEV=3
HD-Audio Generic, HDMI 0
Direct sample snooping device
hw:CARD=Generic,DEV=3
HD-Audio Generic, HDMI 0
Direct hardware device without any conversions
plughw:CARD=Generic,DEV=3
HD-Audio Generic, HDMI 0
Hardware device with all software conversions
sysdefault:CARD=Generic_1
HD-Audio Generic, CX20756 Analog
Default Audio Device
front:CARD=Generic_1,DEV=0
HD-Audio Generic, CX20756 Analog
Front speakers
surround21:CARD=Generic_1,DEV=0
HD-Audio Generic, CX20756 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Generic_1,DEV=0
HD-Audio Generic, CX20756 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Generic_1,DEV=0
HD-Audio Generic, CX20756 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Generic_1,DEV=0
HD-Audio Generic, CX20756 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Generic_1,DEV=0
HD-Audio Generic, CX20756 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Generic_1,DEV=0
HD-Audio Generic, CX20756 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
dmix:CARD=Generic_1,DEV=0
HD-Audio Generic, CX20756 Analog
Direct sample mixing device
dsnoop:CARD=Generic_1,DEV=0
HD-Audio Generic, CX20756 Analog
Direct sample snooping device
hw:CARD=Generic_1,DEV=0
HD-Audio Generic, CX20756 Analog
Direct hardware device without any conversions
plughw:CARD=Generic_1,DEV=0
HD-Audio Generic, CX20756 Analog
Hardware device with all software conversions
Card #0
Name: alsa_card.pci-0000_00_01.1
Driver: module-alsa-card.c
Owner Module: 6
Properties:
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xf1560000 irq 85"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:01.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "9840"
device.product.name = "Kabini HDMI/DP Audio"
device.form_factor = "internal"
device.string = "0"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (sinks: 1,
sources: 0, priority: 5400, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:hdmi-stereo
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "video-display"
Part of profile(s): output:hdmi-stereo
Card #1
Name: alsa_card.pci-0000_00_14.2
Driver: module-alsa-card.c
Owner Module: 7
Properties:
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xf1564000 irq 86"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "780d"
device.product.name = "FCH Azalia Controller"
device.form_factor = "internal"
device.string = "1"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Profiles:
input:analog-stereo: Analog Stereo Input (sinks: 0, sources: 1,
priority: 60, available: yes)
output:analog-stereo: Analog Stereo Output (sinks: 1, sources:
0, priority: 6000, available: yes)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex
(sinks: 1, sources: 1, priority: 6060, available: yes)
off: Off (sinks: 0, sources: 0, priority: 0, available: yes)
Active Profile: output:analog-stereo+input:analog-stereo
Ports:
analog-input-internal-mic: Internal Microphone (priority: 8900,
latency offset: 0 usec, not available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo
analog-input-mic: Microphone (priority: 8700, latency offset: 0
usec, available)
Properties:
device.icon_name = "audio-input-microphone"
Part of profile(s): input:analog-stereo,
output:analog-stereo+input:analog-stereo
analog-output: Analog Output (priority: 9900, latency offset: 0
usec)
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo
analog-output-speaker: Speakers (priority: 10000, latency
offset: 0 usec, not available)
Properties:
device.icon_name = "audio-speakers"
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo
analog-output-headphones: Headphones (priority: 9000, latency
offset: 0 usec, available)
Properties:
device.icon_name = "audio-headphones"
Part of profile(s): output:analog-stereo,
output:analog-stereo+input:analog-stereo
Sink #0
State: IDLE
Name: alsa_output.pci-0000_00_01.1.hdmi-stereo
Description: Built-in Audio Digital Stereo (HDMI)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 64071 / 98% / -0.59 dB, front-right: 64071 /
98% / -0.59 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_01.1.hdmi-stereo.monitor
Latency: 100112 usec, configured 100136 usec
Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xf1560000 irq 85"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:01.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "9840"
device.product.name = "Kabini HDMI/DP Audio"
device.form_factor = "internal"
device.string = "hdmi:0"
device.buffering.buffer_size = "17664"
device.buffering.fragment_size = "2944"
device.access_mode = "mmap"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "Built-in Audio Digital Stereo (HDMI)"
alsa.mixer_name = "ATI R6xx HDMI"
alsa.components = "HDA:1002aa01,00aa0100,00100500"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
hdmi-output-0: HDMI / DisplayPort (priority: 5900, not
available)
Active Port: hdmi-output-0
Formats:
pcm
Sink #1
State: RUNNING
Name: alsa_output.pci-0000_00_14.2.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: yes
Volume: front-left: 0 / 0% / -inf dB, front-right: 0 / 0% / -inf
dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor Source: alsa_output.pci-0000_00_14.2.analog-stereo.monitor
Latency: 0 usec, configured 100136 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "CX20756 Analog"
alsa.id = "CX20756 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xf1564000 irq 86"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "780d"
device.product.name = "FCH Azalia Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "17664"
device.buffering.fragment_size = "2944"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Conexant CX20756"
alsa.components = "HDA:14f15114,1179f920,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-output: Analog Output (priority: 9900)
analog-output-speaker: Speakers (priority: 10000, not available)
analog-output-headphones: Headphones (priority: 9000, available)
Active Port: analog-output-headphones
Formats:
pcm
Source #0
State: RUNNING
Name: alsa_output.pci-0000_00_01.1.hdmi-stereo.monitor
Description: Monitor of Built-in Audio Digital Stereo (HDMI)
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 6
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_01.1.hdmi-stereo
Latency: 0 usec, configured 100136 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Digital Stereo
(HDMI)"
device.class = "monitor"
alsa.card = "0"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xf1560000 irq 85"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:01.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "9840"
device.product.name = "Kabini HDMI/DP Audio"
device.form_factor = "internal"
device.string = "0"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #1
State: RUNNING
Name: alsa_output.pci-0000_00_14.2.analog-stereo.monitor
Description: Monitor of Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100%
/ 0.00 dB
balance 0.00
Base Volume: 65536 / 100% / 0.00 dB
Monitor of Sink: alsa_output.pci-0000_00_14.2.analog-stereo
Latency: 0 usec, configured 100136 usec
Flags: DECIBEL_VOLUME LATENCY
Properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xf1564000 irq 86"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "780d"
device.product.name = "FCH Azalia Controller"
device.form_factor = "internal"
device.string = "1"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Formats:
pcm
Source #2
State: RUNNING
Name: alsa_input.pci-0000_00_14.2.analog-stereo
Description: Built-in Audio Analog Stereo
Driver: module-alsa-card.c
Sample Specification: s16le 2ch 44100Hz
Channel Map: front-left,front-right
Owner Module: 7
Mute: no
Volume: front-left: 16462 / 25% / -36.00 dB, front-right: 16462 /
25% / -36.00 dB
balance 0.00
Base Volume: 13076 / 20% / -42.00 dB
Monitor of Sink: n/a
Latency: 1696258 usec, configured 100136 usec
Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
Properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "CX20756 Analog"
alsa.id = "CX20756 Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xf1564000 irq 86"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card1"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "780d"
device.product.name = "FCH Azalia Controller"
device.form_factor = "internal"
device.string = "front:1"
device.buffering.buffer_size = "17664"
device.buffering.fragment_size = "2944"
device.access_mode = "mmap"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Conexant CX20756"
alsa.components = "HDA:14f15114,1179f920,00100100"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
Ports:
analog-input-internal-mic: Internal Microphone (priority: 8900,
not available)
analog-input-mic: Microphone (priority: 8700, available)
Active Port: analog-input-mic
Formats:
pcm
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute
state of devices"
module.version = "5.0"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the
volume/mute/device state of streams"
module.version = "5.0"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "5.0"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with
additional static information"
module.version = "5.0"
Module #4
Name: module-switch-on-port-available
Argument:
Usage counter: n/a
Properties:
Module #5
Name: module-udev-detect
Argument: tsched=0
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load
matching drivers"
module.version = "5.0"
Module #6
Name: module-alsa-card
Argument: device_id="0" name="pci-0000_00_01.1"
card_name="alsa_card.pci-0000_00_01.1" namereg_fail=false tsched=no
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 2
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "5.0"
Module #7
Name: module-alsa-card
Argument: device_id="1" name="pci-0000_00_14.2"
card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=no
fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes
card_properties="module-udev-detect.discovered=1"
Usage counter: 4
Properties:
module.author = "Lennart Poettering"
module.description = "ALSA Card"
module.version = "5.0"
Module #8
Name: module-native-protocol-unix
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Native protocol (UNIX sockets)"
module.version = "5.0"
Module #9
Name: module-default-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the default sink
and source"
module.version = "5.0"
Module #10
Name: module-rescue-streams
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is removed, try to
move its streams to the default sink/source"
module.version = "5.0"
Module #11
Name: module-always-sink
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Always keeps at least one sink loaded
even if it's a null one"
module.version = "5.0"
Module #12
Name: module-intended-roles
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically set device of streams based
on intended roles of devices"
module.version = "5.0"
Module #13
Name: module-suspend-on-idle
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "When a sink/source is idle for too long,
suspend it"
module.version = "5.0"
Module #14
Name: module-console-kit
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each ConsoleKit
session of this user"
module.version = "5.0"
Module #15
Name: module-systemd-login
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Create a client for each login session of
this user"
module.version = "5.0"
Module #16
Name: module-position-event-sounds
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Position event sounds between L and R
depending on the position on screen of the widget triggering them."
module.version = "5.0"
Module #17
Name: module-role-cork
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Mute & cork streams with certain roles
while others exist"
module.version = "5.0"
Module #18
Name: module-filter-heuristics
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Detect when various filters are desirable"
module.version = "5.0"
Module #19
Name: module-filter-apply
Argument:
Usage counter: n/a
Properties:
module.author = "Colin Guthrie"
module.description = "Load filter sinks automatically when
needed"
module.version = "5.0"
Server String: /run/user/1000/pulse/native
Library Protocol Version: 29
Server Protocol Version: 29
Is Local: yes
Client Index: 20
Tile Size: 65472
User Name: david
Host Name: fuileach
Server Name: pulseaudio
Server Version: 5.0
Default Sample Specification: s16le 2ch 44100Hz
Default Channel Map: front-left,front-right
Default Sink: alsa_output.pci-0000_00_14.2.analog-stereo
Default Source: alsa_input.pci-0000_00_14.2.analog-stereo
Cookie: 21a7:9489
Nov 26 19:37:38 fuileach pulseaudio[4226]: Requested to rewind 17664 bytes.
Nov 26 19:37:38 fuileach pulseaudio[4226]: Limited to 17112 bytes.
Nov 26 19:37:38 fuileach pulseaudio[4226]: before: 4278
Nov 26 19:37:38 fuileach pulseaudio[4226]: after: 4278
Nov 26 19:37:38 fuileach pulseaudio[4226]: Rewound 17112 bytes.
Nov 26 19:37:38 fuileach pulseaudio[4226]: Processing rewind...
Nov 26 19:37:38 fuileach pulseaudio[4226]: latency = 0
Nov 26 19:37:38 fuileach pulseaudio[4226]: Volume change to 15618 at 254052604
was written 8001 usec late
Nov 26 19:37:38 fuileach pulseaudio[4226]: Processing rewind...
Nov 26 19:37:38 fuileach pulseaudio[4226]: Dropped redundant event due to
change event.
Nov 26 19:37:44 fuileach pulseaudio[4226]: Client gnome-shell changes volume of
sink alsa_output.pci-0000_00_14.2.analog-stereo.
Nov 26 19:37:44 fuileach pulseaudio[4226]: Requested volume: front-left: 23086
/ 35% / -27.19 dB, front-right: 23086 / 35% / -27.19 dB
Nov 26 19:37:44 fuileach pulseaudio[4226]: Got hardware volume: front-left:
23253 / 35% / -27.00 dB, front-right: 23253 / 35% / -27.00 dB
Nov 26 19:37:44 fuileach pulseaudio[4226]: Calculated software volume:
front-left: 65065 / 99% / -0.19 dB, front-right: 65065 / 99% / -0.19 dB
(accurate-enough=yes)
Nov 26 19:37:44 fuileach pulseaudio[4226]: Volume going up to 23086 at 259907120
Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7975 usec
Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7929 usec
Nov 26 19:37:44 fuileach pulseaudio[4226]: Storing volume/mute for device+port
sink:alsa_output.pci-0000_00_14.2.analog-stereo:analog-output-headphones.
Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7559 usec
Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7478 usec
Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7456 usec
Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7409 usec
Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7339 usec
Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7300 usec
Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 7279 usec
Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 6994 usec
Nov 26 19:37:44 fuileach pulseaudio[4226]: Next volume change in 6677 usec
Nov 26 19:37:44 fuileach pulseaudio[4226]: Volume change to 23086 at 259907120
was written 45 usec late
Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 364 bytes ago (17300
bytes ahead in playback buffer)
Nov 26 19:37:46 fuileach pulseaudio[4226]: Requested volume: front-left: 23496
/ 36% / -26.73 dB, front-right: 23496 / 36% / -26.73 dB
Nov 26 19:37:46 fuileach pulseaudio[4226]: Got hardware volume: front-left:
23613 / 36% / -26.60 dB, front-right: 23613 / 36% / -26.60 dB
Nov 26 19:37:46 fuileach pulseaudio[4226]: Calculated software volume:
front-left: 65211 / 100% / -0.13 dB, front-right: 65211 / 100% / -0.13 dB
(accurate-enough=yes)
Nov 26 19:37:46 fuileach pulseaudio[4226]: Volume going up to 23496 at 261920446
Nov 26 19:37:46 fuileach pulseaudio[4226]: Requested to rewind 17664 bytes.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Limited to 17364 bytes.
Nov 26 19:37:46 fuileach pulseaudio[4226]: before: 4341
Nov 26 19:37:46 fuileach pulseaudio[4226]: after: 4341
Nov 26 19:37:46 fuileach pulseaudio[4226]: Rewound 17364 bytes.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Processing rewind...
Nov 26 19:37:46 fuileach pulseaudio[4226]: latency = 0
Nov 26 19:37:46 fuileach pulseaudio[4226]: Processing rewind...
Nov 26 19:37:46 fuileach pulseaudio[4226]: Sink
alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Sink
alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Hmm, no streams around, trying to
vacuum.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Freeing input 0 "bell-window-system"
Nov 26 19:37:46 fuileach pulseaudio[4226]: Restoring device for stream
sink-input-by-media-role:event.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Not setting device for stream
audio-volume-change, because already set.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Negotiated format: pcm,
format.sample_format = "\"s16le\"" format.rate = "44100" format.channels =
"2" format.channel_map = "\"front-left,front-right\""
Nov 26 19:37:46 fuileach pulseaudio[4226]: Restoring volume for sink input
sink-input-by-media-role:event.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Restoring mute state for sink input
sink-input-by-media-role:event.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Sink
alsa_output.pci-0000_00_14.2.analog-stereo becomes busy, resuming.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Sink
alsa_output.pci-0000_00_14.2.analog-stereo becomes idle, timeout in 5 seconds.
Nov 26 19:37:46 fuileach pulseaudio[4226]: memblockq requested:
maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
Nov 26 19:37:46 fuileach pulseaudio[4226]: memblockq sanitized:
maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
Nov 26 19:37:46 fuileach pulseaudio[4226]: Created input 1
"audio-volume-change" on alsa_output.pci-0000_00_14.2.analog-stereo with sample
spec s16le 2ch 44100Hz and channel map front-left,front-right
Nov 26 19:37:46 fuileach pulseaudio[4226]: event.mouse.button = "1"
Nov 26 19:37:46 fuileach pulseaudio[4226]: event.mouse.y = "61"
Nov 26 19:37:46 fuileach pulseaudio[4226]: event.mouse.x = "1171"
Nov 26 19:37:46 fuileach pulseaudio[4226]: event.description = "Athraíodh
an airde"
Nov 26 19:37:46 fuileach pulseaudio[4226]: event.id = "audio-volume-change"
Nov 26 19:37:46 fuileach pulseaudio[4226]: media.role = "event"
Nov 26 19:37:46 fuileach pulseaudio[4226]: media.name =
"audio-volume-change"
Nov 26 19:37:46 fuileach pulseaudio[4226]: media.filename =
"/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
Nov 26 19:37:46 fuileach pulseaudio[4226]: Volume change to 23496 at 261920446
was written 31 usec late
Nov 26 19:37:46 fuileach pulseaudio[4226]: application.name = "GNOME Shell"
Nov 26 19:37:46 fuileach pulseaudio[4226]: Written HW volume did not match with
the request: front-left: 23496 / 36% / -26.73 dB, front-right: 23496 / 36%
/ -26.73 dB (request) != front-left: 23253 / 35% / -27.00 dB, front-right:
23253 / 35% / -27.00 dB
Nov 26 19:37:46 fuileach pulseaudio[4226]: native-protocol.peer = "UNIX
socket client"
Nov 26 19:37:46 fuileach pulseaudio[4226]: native-protocol.version = "29"
Nov 26 19:37:46 fuileach pulseaudio[4226]: application.id =
"org.gnome.Shell"
Nov 26 19:37:46 fuileach pulseaudio[4226]: application.icon_name =
"start-here"
Nov 26 19:37:46 fuileach pulseaudio[4226]: application.language =
"ga_IE.UTF-8"
Nov 26 19:37:46 fuileach pulseaudio[4226]: window.x11.screen = "0"
Nov 26 19:37:46 fuileach pulseaudio[4226]: window.x11.display = ":0"
Nov 26 19:37:46 fuileach pulseaudio[4226]: application.process.id = "2224"
Nov 26 19:37:46 fuileach pulseaudio[4226]: application.process.user =
"david"
Nov 26 19:37:46 fuileach pulseaudio[4226]: application.process.host =
"fuileach"
Nov 26 19:37:46 fuileach pulseaudio[4226]: application.process.binary =
"gnome-shell"
Nov 26 19:37:46 fuileach pulseaudio[4226]: application.process.machine_id =
"fb75a029cab0d31b5676ade754660933"
Nov 26 19:37:46 fuileach pulseaudio[4226]: application.process.session_id =
"1"
Nov 26 19:37:46 fuileach pulseaudio[4226]: module-stream-restore.id =
"sink-input-by-media-role:event"
Nov 26 19:37:46 fuileach pulseaudio[4226]: Requested tlength=2000.00 ms,
minreq=20.00 ms
Nov 26 19:37:46 fuileach pulseaudio[4226]: Traditional mode enabled, modifying
sink usec only for compat with minreq.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Requested latency=1960.00 ms,
Received latency=100.14 ms
Nov 26 19:37:46 fuileach pulseaudio[4226]: memblockq requested:
maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528
maxrewind=0
Nov 26 19:37:46 fuileach pulseaudio[4226]: memblockq sanitized:
maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528
maxrewind=0
Nov 26 19:37:46 fuileach pulseaudio[4226]: Final latency 2100.14 ms = 1960.00
ms + 2*20.00 ms + 100.14 ms
Nov 26 19:37:46 fuileach pulseaudio[4226]: Requested volume: front-left: 23086
/ 35% / -27.19 dB, front-right: 23086 / 35% / -27.19 dB
Nov 26 19:37:46 fuileach pulseaudio[4226]: Got hardware volume: front-left:
23253 / 35% / -27.00 dB, front-right: 23253 / 35% / -27.00 dB
Nov 26 19:37:46 fuileach pulseaudio[4226]: Calculated software volume:
front-left: 65065 / 99% / -0.19 dB, front-right: 65065 / 99% / -0.19 dB
(accurate-enough=yes)
Nov 26 19:37:46 fuileach pulseaudio[4226]: Volume going down to 23086 at
261922724
Nov 26 19:37:46 fuileach pulseaudio[4226]: Volume change to 23086 at 261922724
was written 8344 usec late
Nov 26 19:37:46 fuileach pulseaudio[4226]: Requesting rewind due to end of
underrun.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Requested to rewind 17664 bytes.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Limited to 17396 bytes.
Nov 26 19:37:46 fuileach pulseaudio[4226]: before: 4349
Nov 26 19:37:46 fuileach pulseaudio[4226]: after: 4349
Nov 26 19:37:46 fuileach pulseaudio[4226]: Rewound 17396 bytes.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Processing rewind...
Nov 26 19:37:46 fuileach pulseaudio[4226]: latency = 0
Nov 26 19:37:46 fuileach pulseaudio[4226]: Have to rewind 17396 bytes on render
memblockq.
Nov 26 19:37:46 fuileach pulseaudio[4226]: Processing rewind...
Nov 26 19:37:46 fuileach pulseaudio[4226]: Implicit drain of
'audio-volume-change'
Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 5952 bytes ago (11712
bytes ahead in playback buffer)
Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9192 bytes ago (8472
bytes ahead in playback buffer)
Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9220 bytes ago (8444
bytes ahead in playback buffer)
Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9236 bytes ago (8428
bytes ahead in playback buffer)
Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9252 bytes ago (8412
bytes ahead in playback buffer)
Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9304 bytes ago (8360
bytes ahead in playback buffer)
Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9320 bytes ago (8344
bytes ahead in playback buffer)
Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9340 bytes ago (8324
bytes ahead in playback buffer)
Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9352 bytes ago (8312
bytes ahead in playback buffer)
Nov 26 19:37:46 fuileach pulseaudio[4226]: Found underrun 9368 bytes ago (8296
bytes ahead in playback buffer)
--- End Message ---
