Hi, change, recompile and test done.
The test1pnm file is empty. The compressed test1.log is attached to this message. Christophe. Le 03/01/2011 16:50, m. allan noah a ?crit : > ok- can you make some changes, recompile, and test? > > canon_dr.c in function set_window, around line 3615 comment out these lines: > > set_WD_brightness (desc1, s->brightness+128); > set_WD_threshold (desc1, s->threshold); > set_WD_contrast (desc1, s->contrast+128); > > Then compile, copy the library, and scan again, using this command: > > SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode Gray >> test1pnm 2>test1.log > > Hopefully test1.pnm will contain an image. If not, compress the log > and send it to me. > > allan > > On Mon, Jan 3, 2011 at 10:11 AM, m. allan noah<kitno455 at gmail.com> wrote: >> Yes- I can see some set window data in it, though I am not sure it is >> complete. This sniffer program seems to miss some of the data. I will >> look some more today. >> >> allan >> >> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste) >> <liste at alixen.fr> wrote: >>> Hi, >>> >>> have you checked the log ? Is it helpful ? >>> >>> Christophe. >>> >>> Le 29/12/2010 17:04, Christophe Largeau (liste) a ?crit : >>>> >>>> Thank you. >>>> >>>> Note that I'll be away until next monday. >>>> >>>> Christophe. >>>> >>>> Le 29/12/2010 17:00, m. allan noah a ?crit : >>>>> >>>>> Thanks. I'll look at it tonight. >>>>> >>>>> allan >>>>> >>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau (liste) >>>>> <liste at alixen.fr> wrote: >>>>>> >>>>>> the trace.wsl file taken from the snifer is attached to this message. >>>>>> >>>>>> Christophe. >>>>>> >>>>>> >>>>>> Le 29/12/2010 15:38, m. allan noah a ?crit : >>>>>>> >>>>>>> the sniffer utility: >>>>>>> >>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip >>>>>>> >>>>>>> >>>>>>> We need to use that to capture traffic of a low-resolution black and >>>>>>> white >>>>>>> scan. >>>>>>> >>>>>>> I cannot give more specific instructions, because I rarely use this >>>>>>> program. >>>>>>> >>>>>>> allan >>>>>>> >>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau (liste) >>>>>>> <liste at alixen.fr> wrote: >>>>>>>> >>>>>>>> I will replug the scsi card into the orignal windows machine. Do >>>>>>>> you have >>>>>>>> instruction for the log capture on windows ? >>>>>>>> >>>>>>>> Christophe. >>>>>>>> >>>>>>>> Le 29/12/2010 15:22, m. allan noah a ?crit : >>>>>>>>> >>>>>>>>> hmm- it is mad about something we ask it to do in the set window >>>>>>>>> command. I don't have a protocol manual for this machine, so we have >>>>>>>>> to guess what the problem is. Or, we have to try and capture a log >>>>>>>>> from Windows driver. Can you use this machine on windows? >>>>>>>>> >>>>>>>>> allan >>>>>>>>> >>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau (liste) >>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>> >>>>>>>>>> the new dr.log is attached to this message. >>>>>>>>>> >>>>>>>>>> Christophe. >>>>>>>>>> >>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a ?crit : >>>>>>>>>>> >>>>>>>>>>> Sorry, hit 'send' too soon- you should try: >>>>>>>>>>> >>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2 >>>>>>>>>>> 2>dr.log>dr.pnm >>>>>>>>>>> >>>>>>>>>>> allan >>>>>>>>>>> >>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan noah<kitno455 at >>>>>>>>>>> gmail.com> >>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>> "scanimage: output is not a file, exiting" >>>>>>>>>>>> >>>>>>>>>>>> allan >>>>>>>>>>>> >>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau (liste) >>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> Hi, >>>>>>>>>>>>> >>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu 10.10 >>>>>>>>>>>>> >>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2 >>>>>>>>>>>>> API >>>>>>>>>>>>> library for scanners >>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2 >>>>>>>>>>>>> API >>>>>>>>>>>>> library for scanners -- utilities >>>>>>>>>>>>> >>>>>>>>>>>>> The sane-find-scanner commands returns : >>>>>>>>>>>>> # sane-find-scanner will now attempt to detect your scanner. >>>>>>>>>>>>> If the >>>>>>>>>>>>> # result is different from what you expected, first make sure >>>>>>>>>>>>> your >>>>>>>>>>>>> # scanner is powered up and properly connected to your computer. >>>>>>>>>>>>> >>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at /dev/sg2 >>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may not be >>>>>>>>>>>>> supported by >>>>>>>>>>>>> SANE. >>>>>>>>>>>>> Try >>>>>>>>>>>>> # scanimage -L and read the backend's manpage. >>>>>>>>>>>>> >>>>>>>>>>>>> # No USB scanners found. If you expected something different, >>>>>>>>>>>>> make >>>>>>>>>>>>> sure >>>>>>>>>>>>> that >>>>>>>>>>>>> # you have loaded a kernel driver for your USB host controller >>>>>>>>>>>>> and >>>>>>>>>>>>> have >>>>>>>>>>>>> setup >>>>>>>>>>>>> # the USB system correctly. See man sane-usb for details. >>>>>>>>>>>>> >>>>>>>>>>>>> # Not checking for parallel port scanners. >>>>>>>>>>>>> >>>>>>>>>>>>> # Most Scanners connected to the parallel port or other >>>>>>>>>>>>> proprietary >>>>>>>>>>>>> ports >>>>>>>>>>>>> # can't be detected by this program. >>>>>>>>>>>>> >>>>>>>>>>>>> when I tried the command "scanimage -L" the scanner wasn't >>>>>>>>>>>>> recognized >>>>>>>>>>>>> >>>>>>>>>>>>> thanks to this message : >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html >>>>>>>>>>>>> , >>>>>>>>>>>>> I've added the following lines to canon_dr.c at line 1203. >>>>>>>>>>>>> >>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){ >>>>>>>>>>>>> s->can_write_panel = 0; >>>>>>>>>>>>> } >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Then I replace the compiled versions of libsane-canon_dr.la and >>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane >>>>>>>>>>>>> >>>>>>>>>>>>> Now, the "scanimage -L" command returns : >>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F scanner >>>>>>>>>>>>> >>>>>>>>>>>>> Great, but the scanner doesn't work : >>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2 >>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr to 30. >>>>>>>>>>>>> [canon_dr] sane_init: start >>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35, from sane-backends >>>>>>>>>>>>> 1.0.21 >>>>>>>>>>>>> [canon_dr] sane_init: finish >>>>>>>>>>>>> [canon_dr] sane_open: start >>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently attached, attaching >>>>>>>>>>>>> [canon_dr] sane_get_devices: start >>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file canon_dr.conf >>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi CANON DR' >>>>>>>>>>>>> [canon_dr] attach_one: start >>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2' >>>>>>>>>>>>> [canon_dr] connect_fd: start >>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device >>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested buffer size >>>>>>>>>>>>> (2097152/524288) >>>>>>>>>>>>> [canon_dr] wait_scanner: start >>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00 >>>>>>>>>>>>> ...... >>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>> [canon_dr] wait_scanner: finish >>>>>>>>>>>>> [canon_dr] connect_fd: finish >>>>>>>>>>>>> [canon_dr] init_inquire: start >>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00 >>>>>>>>>>>>> ....0. >>>>>>>>>>>>> [canon_dr] in: reading 48 bytes >>>>>>>>>>>>> [canon_dr] in:<< >>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 4e 4f 4e 20 20 20 >>>>>>>>>>>>> ........CANON >>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 20 20 20 20 20 20 >>>>>>>>>>>>> DR-5060F >>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 30 37 20 20 20 20 >>>>>>>>>>>>> 011020010607 >>>>>>>>>>>>> [canon_dr] in: read 48 bytes >>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner DR-5060F version >>>>>>>>>>>>> 0110 >>>>>>>>>>>>> at >>>>>>>>>>>>> /dev/sg2 >>>>>>>>>>>>> [canon_dr] init_inquire: finish >>>>>>>>>>>>> [canon_dr] init_vpd: start >>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00 >>>>>>>>>>>>> ...... >>>>>>>>>>>>> [canon_dr] in: reading 30 bytes >>>>>>>>>>>>> [canon_dr] in:<< >>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 01 2c 01 2c 00 c8 >>>>>>>>>>>>> ....#.,.,..,.,.. >>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 13 ee 0e 00 >>>>>>>>>>>>> .d............ >>>>>>>>>>>>> [canon_dr] in: read 30 bytes >>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>> [canon_dr] init_vpd: length=23 >>>>>>>>>>>>> [canon_dr] standard options >>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi >>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi >>>>>>>>>>>>> [canon_dr] step x res: 1 dpi >>>>>>>>>>>>> [canon_dr] step y res: 0 dpi >>>>>>>>>>>>> [canon_dr] max x res: 300 dpi >>>>>>>>>>>>> [canon_dr] max y res: 300 dpi >>>>>>>>>>>>> [canon_dr] min x res: 200 dpi >>>>>>>>>>>>> [canon_dr] min y res: 100 dpi >>>>>>>>>>>>> [canon_dr] 60 dpi: 0 >>>>>>>>>>>>> [canon_dr] 75 dpi: 0 >>>>>>>>>>>>> [canon_dr] 100 dpi: 0 >>>>>>>>>>>>> [canon_dr] 120 dpi: 0 >>>>>>>>>>>>> [canon_dr] 150 dpi: 0 >>>>>>>>>>>>> [canon_dr] 160 dpi: 0 >>>>>>>>>>>>> [canon_dr] 180 dpi: 0 >>>>>>>>>>>>> [canon_dr] 200 dpi: 1 >>>>>>>>>>>>> [canon_dr] 240 dpi: 1 >>>>>>>>>>>>> [canon_dr] 300 dpi: 1 >>>>>>>>>>>>> [canon_dr] 320 dpi: 0 >>>>>>>>>>>>> [canon_dr] 400 dpi: 0 >>>>>>>>>>>>> [canon_dr] 480 dpi: 0 >>>>>>>>>>>>> [canon_dr] 600 dpi: 0 >>>>>>>>>>>>> [canon_dr] 800 dpi: 0 >>>>>>>>>>>>> [canon_dr] 1200 dpi: 0 >>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in) >>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in) >>>>>>>>>>>>> [canon_dr] AWD: 0 >>>>>>>>>>>>> [canon_dr] CE Emphasis: 0 >>>>>>>>>>>>> [canon_dr] C Emphasis: 0 >>>>>>>>>>>>> [canon_dr] High quality: 0 >>>>>>>>>>>>> [canon_dr] grayscale: 1 >>>>>>>>>>>>> [canon_dr] halftone: 1 >>>>>>>>>>>>> [canon_dr] monochrome: 1 >>>>>>>>>>>>> [canon_dr] overflow: 0 >>>>>>>>>>>>> [canon_dr] init_vpd: finish >>>>>>>>>>>>> [canon_dr] init_model: start >>>>>>>>>>>>> [canon_dr] init_model: finish >>>>>>>>>>>>> [canon_dr] init_panel: start >>>>>>>>>>>>> [canon_dr] read_panel: start >>>>>>>>>>>>> [canon_dr] read_panel: finish 0 >>>>>>>>>>>>> [canon_dr] send_panel: start >>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing >>>>>>>>>>>>> [canon_dr] init_panel: finish >>>>>>>>>>>>> [canon_dr] init_user: start >>>>>>>>>>>>> [canon_dr] init_user: finish >>>>>>>>>>>>> [canon_dr] init_options: start >>>>>>>>>>>>> [canon_dr] init_options: finish >>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>> [canon_dr] disconnecting scsi device >>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>> [canon_dr] attach_one: finish >>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner /dev/sg2 >>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s) >>>>>>>>>>>>> [canon_dr] sane_get_devices: finish >>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested >>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found >>>>>>>>>>>>> [canon_dr] connect_fd: start >>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device >>>>>>>>>>>>> [canon_dr] wait_scanner: start >>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00 >>>>>>>>>>>>> ...... >>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>> [canon_dr] wait_scanner: finish >>>>>>>>>>>>> [canon_dr] connect_fd: finish >>>>>>>>>>>>> [canon_dr] sane_open: finish >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0 >>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0) >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0 >>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0) >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37 >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38 >>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-x' (8) >>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6) >>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-y' (9) >>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7) >>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6) >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8 >>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-x' (8) >>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7) >>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9 >>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-y' (9) >>>>>>>>>>>>> scanimage: output is not a file, exiting >>>>>>>>>>>>> [canon_dr] sane_close: start >>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>> [canon_dr] disconnecting scsi device >>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>> [canon_dr] image_buffers: start >>>>>>>>>>>>> [canon_dr] image_buffers: finish >>>>>>>>>>>>> [canon_dr] offset_buffers: start >>>>>>>>>>>>> [canon_dr] offset_buffers: finish >>>>>>>>>>>>> [canon_dr] gain_buffers: start >>>>>>>>>>>>> [canon_dr] gain_buffers: finish >>>>>>>>>>>>> [canon_dr] sane_close: finish >>>>>>>>>>>>> [canon_dr] sane_exit: start >>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>> [canon_dr] sane_exit: finish >>>>>>>>>>>>> >>>>>>>>>>>>> Any idea ? >>>>>>>>>>>>> >>>>>>>>>>>>> Christophe. >>>>>>>>>>>>> -- >>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>> Alixen >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org >>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel >>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe your_password" >>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> "The truth is an offense, but not a sin" >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Christophe Largeau >>>>>>>>>> Alixen >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Christophe Largeau >>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Christophe Largeau >>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>> >>>>> >>>>> >>>>> >>>> >>>> >>> >>> -- >>> Christophe Largeau >>> Alixen 20 rue Jean Rostand 91 400 Orsay >>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>> >> >> >> >> -- >> "The truth is an offense, but not a sin" >> > > > -- Christophe Largeau Alixen 20 rue Jean Rostand 91 400 Orsay Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 -------------- next part -------------- A non-text attachment was scrubbed... Name: test1.log.gz Type: application/x-gzip Size: 2598 bytes Desc: not available URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110103/3f0d73d9/attachment-0001.bin>