Ok. Perhaps you can do some more tests in grayscale with sane, where you change something like resolution or the scan width each time. I want to make sure that gray works properly. If you find any problems, please send the logs and the command line you used.
After that, I am afraid we will need to get another log of the windows driver, this time making a black&white scan. allan On Wed, Jan 5, 2011 at 5:50 AM, Christophe Largeau (liste) <liste at alixen.fr> wrote: > just done test7 (Lineart mode). The result is a black image ( > http://dl.free.fr/bDipeF5mF > ?) > > Christophe. > > Le 05/01/2011 09:23, Christophe Largeau (liste) a ?crit : >> >> Great, it's working fine (see the test6.tar.gz at >> http://dl.free.fr/bGEgn9yFu ) >> >> I'll make series of tests at other resolutions. >> >> Thanx. >> >> Le 04/01/2011 17:53, m. allan noah a ?crit : >>> >>> ok- let us try again, slightly updated file. >>> >>> allan >>> >>> On Tue, Jan 4, 2011 at 11:26 AM, Christophe Largeau (liste) >>> <liste at alixen.fr> wrote: >>>> >>>> Hi, >>>> >>>> thank you for the new version. >>>> >>>> The scan is not exactly what it should be (see the file >>>> test5.tar.gz). The >>>> scanned image is not at the right position. Probably a shift problem. >>>> >>>> Note that for all the tests I've done it was a A4 paper and the Canon >>>> DR-5060-F is a A3 scanner. >>>> >>>> the file test5.tar.gz can be downloaded here : >>>> http://dl.free.fr/baKWwnrcy >>>> >>>> Christophe. >>>> >>>> Le 04/01/2011 16:23, m. allan noah a ?crit : >>>>> >>>>> here is a new version of two files. use these to replace your existing >>>>> copies, and recompile. This should contain all of your current fixes, >>>>> and it should (hopefully) produce proper grayscale scans. >>>>> >>>>> If you can test this also in lineart mode, it might need the same >>>>> width fix as grayscale... >>>>> >>>>> allan >>>>> >>>>> On Tue, Jan 4, 2011 at 4:33 AM, Christophe Largeau (liste) >>>>> <liste at alixen.fr> wrote: >>>>>> >>>>>> Thank you for the information, waiting for your fix. >>>>>> >>>>>> Christophe. >>>>>> >>>>>> Le 03/01/2011 20:03, m. allan noah a ?crit : >>>>>>> >>>>>>> It appears that the corrupt image is because the scanner sends us >>>>>>> 1728 >>>>>>> pixels per line, but we asked for only 1700. Likely this means that >>>>>>> the scanner is limited to image widths which are a multiple of 32 >>>>>>> pixels. I will see if I can come up with a fix. >>>>>>> >>>>>>> allan >>>>>>> >>>>>>> On Mon, Jan 3, 2011 at 12:54 PM, m. allan noah<kitno455 at gmail.com> >>>>>>> wrote: >>>>>>>> >>>>>>>> jpg destroys too much image information. Any chance to can compress >>>>>>>> the pnm instead, and send that to me directly? >>>>>>>> >>>>>>>> allan >>>>>>>> >>>>>>>> On Mon, Jan 3, 2011 at 12:11 PM, Christophe Largeau (liste) >>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>> >>>>>>>>> OK, >>>>>>>>> >>>>>>>>> my A4 page (basically 0.5 millimeter squares) has been processed >>>>>>>>> >>>>>>>>> you can view the result here >>>>>>>>> http://i37.servimg.com/u/f37/15/57/48/39/test3p10.jpg : not >>>>>>>>> really the >>>>>>>>> expected result ;) >>>>>>>>> >>>>>>>>> You'll find the compressed test3.log attached to this message. >>>>>>>>> >>>>>>>>> Do you need other informations for ssm_df() and ssm_do() >>>>>>>>> debugging ? >>>>>>>>> >>>>>>>>> Christophe. >>>>>>>>> >>>>>>>>> Le 03/01/2011 17:45, m. allan noah a ?crit : >>>>>>>>>> >>>>>>>>>> Ah- same thing, this time also comment out ssm_df(). It would >>>>>>>>>> be nice >>>>>>>>>> to get those two commands working for your machine (if they are >>>>>>>>>> supported by the hardware), but they are not required for proper >>>>>>>>>> functioning. >>>>>>>>>> >>>>>>>>>> allan >>>>>>>>>> >>>>>>>>>> On Mon, Jan 3, 2011 at 11:40 AM, Christophe Largeau (liste) >>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>> >>>>>>>>>>> Here is the new test2.log ;) >>>>>>>>>>> >>>>>>>>>>> Christophe. >>>>>>>>>>> >>>>>>>>>>> Le 03/01/2011 17:31, m. allan noah a ?crit : >>>>>>>>>>>> >>>>>>>>>>>> Excellent. set_window is now accepted by the scanner, but it >>>>>>>>>>>> does >>>>>>>>>>>> not >>>>>>>>>>>> like our ssm_do() call. So, edit canon_dr.c around line 3273, >>>>>>>>>>>> and >>>>>>>>>>>> comment out the call to ssm_do(). Then try again with test2 :) >>>>>>>>>>>> >>>>>>>>>>>> allan >>>>>>>>>>>> >>>>>>>>>>>> On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste) >>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> Hi, >>>>>>>>>>>>> >>>>>>>>>>>>> change, recompile and test done. >>>>>>>>>>>>> >>>>>>>>>>>>> The test1pnm file is empty. >>>>>>>>>>>>> >>>>>>>>>>>>> The compressed test1.log is attached to this message. >>>>>>>>>>>>> >>>>>>>>>>>>> Christophe. >>>>>>>>>>>>> >>>>>>>>>>>>> Le 03/01/2011 16:50, m. allan noah a ?crit : >>>>>>>>>>>>>> >>>>>>>>>>>>>> ok- can you make some changes, recompile, and test? >>>>>>>>>>>>>> >>>>>>>>>>>>>> canon_dr.c in function set_window, around line 3615 comment >>>>>>>>>>>>>> out >>>>>>>>>>>>>> these >>>>>>>>>>>>>> lines: >>>>>>>>>>>>>> >>>>>>>>>>>>>> set_WD_brightness (desc1, s->brightness+128); >>>>>>>>>>>>>> set_WD_threshold (desc1, s->threshold); >>>>>>>>>>>>>> set_WD_contrast (desc1, s->contrast+128); >>>>>>>>>>>>>> >>>>>>>>>>>>>> Then compile, copy the library, and scan again, using this >>>>>>>>>>>>>> command: >>>>>>>>>>>>>> >>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode Gray >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> test1pnm 2>test1.log >>>>>>>>>>>>>> >>>>>>>>>>>>>> Hopefully test1.pnm will contain an image. If not, compress >>>>>>>>>>>>>> the >>>>>>>>>>>>>> log >>>>>>>>>>>>>> and send it to me. >>>>>>>>>>>>>> >>>>>>>>>>>>>> allan >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 10:11 AM, m. allan >>>>>>>>>>>>>> noah<kitno455 at gmail.com> >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Yes- I can see some set window data in it, though I am not >>>>>>>>>>>>>>> sure >>>>>>>>>>>>>>> it >>>>>>>>>>>>>>> is >>>>>>>>>>>>>>> complete. This sniffer program seems to miss some of the >>>>>>>>>>>>>>> data. I >>>>>>>>>>>>>>> will >>>>>>>>>>>>>>> look some more today. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste) >>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> have you checked the log ? Is it helpful ? >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a ?crit : >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Thank you. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Note that I'll be away until next monday. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Le 29/12/2010 17:00, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thanks. I'll look at it tonight. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau >>>>>>>>>>>>>>>>>> (liste) >>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> the trace.wsl file taken from the snifer is attached >>>>>>>>>>>>>>>>>>> to this >>>>>>>>>>>>>>>>>>> message. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:38, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> the sniffer utility: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> We need to use that to capture traffic of a >>>>>>>>>>>>>>>>>>>> low-resolution >>>>>>>>>>>>>>>>>>>> black >>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>> white >>>>>>>>>>>>>>>>>>>> scan. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> I cannot give more specific instructions, because I >>>>>>>>>>>>>>>>>>>> rarely >>>>>>>>>>>>>>>>>>>> use >>>>>>>>>>>>>>>>>>>> this >>>>>>>>>>>>>>>>>>>> program. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau >>>>>>>>>>>>>>>>>>>> (liste) >>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I will replug the scsi card into the orignal windows >>>>>>>>>>>>>>>>>>>>> machine. >>>>>>>>>>>>>>>>>>>>> Do >>>>>>>>>>>>>>>>>>>>> you have >>>>>>>>>>>>>>>>>>>>> instruction for the log capture on windows ? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:22, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> hmm- it is mad about something we ask it to do in >>>>>>>>>>>>>>>>>>>>>> the set >>>>>>>>>>>>>>>>>>>>>> window >>>>>>>>>>>>>>>>>>>>>> command. I don't have a protocol manual for this >>>>>>>>>>>>>>>>>>>>>> machine, >>>>>>>>>>>>>>>>>>>>>> so >>>>>>>>>>>>>>>>>>>>>> we >>>>>>>>>>>>>>>>>>>>>> have >>>>>>>>>>>>>>>>>>>>>> to guess what the problem is. Or, we have to try and >>>>>>>>>>>>>>>>>>>>>> capture a >>>>>>>>>>>>>>>>>>>>>> log >>>>>>>>>>>>>>>>>>>>>> from Windows driver. Can you use this machine on >>>>>>>>>>>>>>>>>>>>>> windows? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau >>>>>>>>>>>>>>>>>>>>>> (liste) >>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> the new dr.log is attached to this message. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Sorry, hit 'send' too soon- you should try: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d >>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>> 2>dr.log>dr.pnm >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan >>>>>>>>>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com> >>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> "scanimage: output is not a file, exiting" >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau >>>>>>>>>>>>>>>>>>>>>>>>> (liste) >>>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu >>>>>>>>>>>>>>>>>>>>>>>>>> 10.10 >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2 >>>>>>>>>>>>>>>>>>>>>>>>>> API >>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners >>>>>>>>>>>>>>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2 >>>>>>>>>>>>>>>>>>>>>>>>>> API >>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners -- utilities >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> The sane-find-scanner commands returns : >>>>>>>>>>>>>>>>>>>>>>>>>> # sane-find-scanner will now attempt to detect >>>>>>>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>>>>>>> scanner. >>>>>>>>>>>>>>>>>>>>>>>>>> If the >>>>>>>>>>>>>>>>>>>>>>>>>> # result is different from what you expected, >>>>>>>>>>>>>>>>>>>>>>>>>> first >>>>>>>>>>>>>>>>>>>>>>>>>> make >>>>>>>>>>>>>>>>>>>>>>>>>> sure >>>>>>>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>>>>>>> # scanner is powered up and properly connected to >>>>>>>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>>>>>>> computer. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at >>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may >>>>>>>>>>>>>>>>>>>>>>>>>> not >>>>>>>>>>>>>>>>>>>>>>>>>> be >>>>>>>>>>>>>>>>>>>>>>>>>> supported by >>>>>>>>>>>>>>>>>>>>>>>>>> SANE. >>>>>>>>>>>>>>>>>>>>>>>>>> Try >>>>>>>>>>>>>>>>>>>>>>>>>> # scanimage -L and read the backend's manpage. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> # No USB scanners found. If you expected something >>>>>>>>>>>>>>>>>>>>>>>>>> different, >>>>>>>>>>>>>>>>>>>>>>>>>> make >>>>>>>>>>>>>>>>>>>>>>>>>> sure >>>>>>>>>>>>>>>>>>>>>>>>>> that >>>>>>>>>>>>>>>>>>>>>>>>>> # you have loaded a kernel driver for your USB >>>>>>>>>>>>>>>>>>>>>>>>>> host >>>>>>>>>>>>>>>>>>>>>>>>>> controller >>>>>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>>>>> have >>>>>>>>>>>>>>>>>>>>>>>>>> setup >>>>>>>>>>>>>>>>>>>>>>>>>> # the USB system correctly. See man sane-usb for >>>>>>>>>>>>>>>>>>>>>>>>>> details. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> # Not checking for parallel port scanners. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> # Most Scanners connected to the parallel port or >>>>>>>>>>>>>>>>>>>>>>>>>> other >>>>>>>>>>>>>>>>>>>>>>>>>> proprietary >>>>>>>>>>>>>>>>>>>>>>>>>> ports >>>>>>>>>>>>>>>>>>>>>>>>>> # can't be detected by this program. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> when I tried the command "scanimage -L" the >>>>>>>>>>>>>>>>>>>>>>>>>> scanner >>>>>>>>>>>>>>>>>>>>>>>>>> wasn't >>>>>>>>>>>>>>>>>>>>>>>>>> recognized >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> thanks to this message : >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> , >>>>>>>>>>>>>>>>>>>>>>>>>> I've added the following lines to canon_dr.c at >>>>>>>>>>>>>>>>>>>>>>>>>> line >>>>>>>>>>>>>>>>>>>>>>>>>> 1203. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){ >>>>>>>>>>>>>>>>>>>>>>>>>> s->can_write_panel = 0; >>>>>>>>>>>>>>>>>>>>>>>>>> } >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Then I replace the compiled versions of >>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.la >>>>>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Now, the "scanimage -L" command returns : >>>>>>>>>>>>>>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F >>>>>>>>>>>>>>>>>>>>>>>>>> scanner >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Great, but the scanner doesn't work : >>>>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d >>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr >>>>>>>>>>>>>>>>>>>>>>>>>> to 30. >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35, >>>>>>>>>>>>>>>>>>>>>>>>>> from >>>>>>>>>>>>>>>>>>>>>>>>>> sane-backends >>>>>>>>>>>>>>>>>>>>>>>>>> 1.0.21 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently >>>>>>>>>>>>>>>>>>>>>>>>>> attached, >>>>>>>>>>>>>>>>>>>>>>>>>> attaching >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file >>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr.conf >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi >>>>>>>>>>>>>>>>>>>>>>>>>> CANON >>>>>>>>>>>>>>>>>>>>>>>>>> DR' >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2' >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested buffer >>>>>>>>>>>>>>>>>>>>>>>>>> size >>>>>>>>>>>>>>>>>>>>>>>>>> (2097152/524288) >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00 >>>>>>>>>>>>>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00 >>>>>>>>>>>>>>>>>>>>>>>>>> ....0. >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<< >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 >>>>>>>>>>>>>>>>>>>>>>>>>> 4e 4f >>>>>>>>>>>>>>>>>>>>>>>>>> 4e >>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>> ........CANON >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 >>>>>>>>>>>>>>>>>>>>>>>>>> 20 20 >>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 >>>>>>>>>>>>>>>>>>>>>>>>>> 30 37 >>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>> 011020010607 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 48 bytes >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner >>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F >>>>>>>>>>>>>>>>>>>>>>>>>> version >>>>>>>>>>>>>>>>>>>>>>>>>> 0110 >>>>>>>>>>>>>>>>>>>>>>>>>> at >>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00 >>>>>>>>>>>>>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<< >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 >>>>>>>>>>>>>>>>>>>>>>>>>> 01 2c >>>>>>>>>>>>>>>>>>>>>>>>>> 01 >>>>>>>>>>>>>>>>>>>>>>>>>> 2c >>>>>>>>>>>>>>>>>>>>>>>>>> 00 >>>>>>>>>>>>>>>>>>>>>>>>>> c8 >>>>>>>>>>>>>>>>>>>>>>>>>> ....#.,.,..,.,.. >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 >>>>>>>>>>>>>>>>>>>>>>>>>> 13 ee >>>>>>>>>>>>>>>>>>>>>>>>>> 0e >>>>>>>>>>>>>>>>>>>>>>>>>> 00 >>>>>>>>>>>>>>>>>>>>>>>>>> .d............ >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 30 bytes >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: length=23 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] standard options >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 60 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 75 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 100 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 120 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 150 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 160 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 180 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 200 dpi: 1 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 240 dpi: 1 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 300 dpi: 1 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 320 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 400 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 480 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 600 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 800 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in) >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in) >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] AWD: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] C Emphasis: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] High quality: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] grayscale: 1 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] halftone: 1 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] monochrome: 1 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] overflow: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: finish 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner >>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s) >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00 >>>>>>>>>>>>>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>> '' (0) >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>> '' (0) >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x' >>>>>>>>>>>>>>>>>>>>>>>>>> (8) >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x' >>>>>>>>>>>>>>>>>>>>>>>>>> (6) >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y' >>>>>>>>>>>>>>>>>>>>>>>>>> (9) >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y' >>>>>>>>>>>>>>>>>>>>>>>>>> (7) >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x' >>>>>>>>>>>>>>>>>>>>>>>>>> (6) >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for >>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x' >>>>>>>>>>>>>>>>>>>>>>>>>> (8) >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y' >>>>>>>>>>>>>>>>>>>>>>>>>> (7) >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9 >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for >>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y' >>>>>>>>>>>>>>>>>>>>>>>>>> (9) >>>>>>>>>>>>>>>>>>>>>>>>>> scanimage: output is not a file, exiting >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: finish >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Any idea ? >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>>>>>>>>> Alixen >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel mailing list: >>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel at lists.alioth.debian.org >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe >>>>>>>>>>>>>>>>>>>>>>>>>> your_password" >>>>>>>>>>>>>>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin" >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>>>>>> Alixen >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> "The truth is an offense, but not a sin" >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> Christophe Largeau >>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Christophe Largeau >>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> "The truth is an offense, but not a sin" >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Christophe Largeau >>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> -- >>>> Christophe Largeau >>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>> >>> >>> >>> >> >> > > -- > Christophe Largeau > Alixen 20 rue Jean Rostand 91 400 Orsay > Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 > -- "The truth is an offense, but not a sin"