Re: OpenMooCow 0.3
Helge Hafting helge.haft...@hist.no wrote: The accelerometers don't work though. hexdump /dev/input/event2 gets me changing output as I turn the phone around. event3 is dead, perhaps that is the problem? That would certainly prevent mooing. If the accelerometers don't work, you should still be able to test the audio parts by pressing the cow picture on the screen :) I think there might still be some locking problems lurking in the kernel parts of the accelerometer stuff. For me, re-starting OpenMooCow almost always makes it work the second time. Tom ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: OpenMooCow 0.3
Thomas White wrote: Helge Hafting helge.haft...@hist.no wrote: My SHR is unable to open audio. But the older moocow worked with the same setup. I can stop speech-dispatcher, but it doesn't help. There is no snd-pcm-oss module to load, bt the previous moocow didn't need that. Previous meaning version 0.2? All the previous versions are available from my site: http://www.srcf.ucam.org/~taw27/openmoko/openmoocow/ - would you be able to check version 0.2 again to be sure? This is particularly puzzling because the audio parts of the program haven't been touched between 0.2 and 0.3... Strange. I must have done something wrong, this time both version 0.2-r2 and version 0.3 moos, as soon as I stop speech-dispatcher. The accelerometers don't work though. hexdump /dev/input/event2 gets me changing output as I turn the phone around. event3 is dead, perhaps that is the problem? I have a 2.6.24 kernel, as SHR doen't work well with 2.6.28 yet. Helge Hafting ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: OpenMooCow 0.3
Klaus Kurzmann wrote: * Thomas White ta...@cam.ac.uk [081219 15:24]: On Fri, 19 Dec 2008 10:24:23 +0100 KaZeR ka...@altern.org wrote: my SHR doesn't play the sound... am i missing something? Unable to open audio: No available audio device I had the exact same issue last week (haven't tried again since, and i'm currently flashing 2008.12) This sounds odd. OpenMooCow uses SDL for all the audio work, and the No available audio device part of that messages comes from SDL itself. So this could indicate a problem with SDL or something lower-level. I've seen audio break before due to a mismatch of kernel modules. Does audio work in any other programs for you? I had the same problem... modprobe snd-pcm-oss helped :-) My SHR is unable to open audio. But the older moocow worked with the same setup. I can stop speech-dispatcher, but it doesn't help. There is no snd-pcm-oss module to load, bt the previous moocow didn't need that. Helge Hafting ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: OpenMooCow 0.3
Helge Hafting helge.haft...@hist.no wrote: My SHR is unable to open audio. But the older moocow worked with the same setup. I can stop speech-dispatcher, but it doesn't help. There is no snd-pcm-oss module to load, bt the previous moocow didn't need that. Previous meaning version 0.2? All the previous versions are available from my site: http://www.srcf.ucam.org/~taw27/openmoko/openmoocow/ - would you be able to check version 0.2 again to be sure? This is particularly puzzling because the audio parts of the program haven't been touched between 0.2 and 0.3... Tom ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: OpenMooCow 0.3
Works fine on SHR, just one thing I have to change the .desktop and add a category (for example Applications), in order to have the shortcut displayed. my SHR doesn't play the sound... am i missing something? r...@om-gta02 /usr/share/applications $ openmoocow Neo Freerunner detected Old threshold was 0 Successfully disabled accelerometer threshold. Unable to open audio: No available audio device Trying to open the audio again... Unable to open audio: No available audio device Trying to open the audio again... Unable to open audio: No available audio device Trying to open the audio again... Unable to open audio: No available audio device -- Petr Vaněk ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
RE: OpenMooCow 0.3
-Message d'origine- De : community-boun...@lists.openmoko.org [mailto:community-boun...@lists.openmoko.org] De la part de Petr Vanek Envoyé : vendredi 19 décembre 2008 09:19 À : community@lists.openmoko.org Objet : Re: OpenMooCow 0.3 Works fine on SHR, just one thing I have to change the .desktop and add a category (for example Applications), in order to have the shortcut displayed. my SHR doesn't play the sound... am i missing something? r...@om-gta02 /usr/share/applications $ openmoocow Neo Freerunner detected Old threshold was 0 Successfully disabled accelerometer threshold. Unable to open audio: No available audio device Trying to open the audio again... Unable to open audio: No available audio device Trying to open the audio again... Unable to open audio: No available audio device Trying to open the audio again... Unable to open audio: No available audio device I had the exact same issue last week (haven't tried again since, and i'm currently flashing 2008.12) ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: OpenMooCow 0.3
On Fri, 19 Dec 2008 10:24:23 +0100 KaZeR ka...@altern.org wrote: my SHR doesn't play the sound... am i missing something? Unable to open audio: No available audio device I had the exact same issue last week (haven't tried again since, and i'm currently flashing 2008.12) This sounds odd. OpenMooCow uses SDL for all the audio work, and the No available audio device part of that messages comes from SDL itself. So this could indicate a problem with SDL or something lower-level. I've seen audio break before due to a mismatch of kernel modules. Does audio work in any other programs for you? Tom ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: OpenMooCow 0.3
* Thomas White ta...@cam.ac.uk [081219 15:24]: On Fri, 19 Dec 2008 10:24:23 +0100 KaZeR ka...@altern.org wrote: my SHR doesn't play the sound... am i missing something? Unable to open audio: No available audio device I had the exact same issue last week (haven't tried again since, and i'm currently flashing 2008.12) This sounds odd. OpenMooCow uses SDL for all the audio work, and the No available audio device part of that messages comes from SDL itself. So this could indicate a problem with SDL or something lower-level. I've seen audio break before due to a mismatch of kernel modules. Does audio work in any other programs for you? I had the same problem... modprobe snd-pcm-oss helped :-) mrmoku ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: OpenMooCow 0.3
On Friday 19 December 2008 21:22:03 Klaus Kurzmann wrote: I had the same problem... modprobe snd-pcm-oss helped :-) For me, /etc/init.d/speech-dispatcher stop helped Yann ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: OpenMooCow 0.3
I've seen audio break before due to a mismatch of kernel modules. Does audio work in any other programs for you? I had the same problem... modprobe snd-pcm-oss helped :-) sorry to reply on wrong place in thread but gmane news server sometimes doesn't have the message available... /etc/init.d/speech-dispatcher stop was the right solution for me, therefore i presume for all SHR users... cheers -- Petr Vaněk ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: OpenMooCow 0.3
On Friday 19 December 2008 22:13:21 Yann Neveu wrote: On Friday 19 December 2008 21:22:03 Klaus Kurzmann wrote: I had the same problem... modprobe snd-pcm-oss helped :-) For me, /etc/init.d/speech-dispatcher stop helped Yeah... This seems to work here also. But anyone has an idea what speech- dispatcher does? Don't we need it? The chance is rather high that it is more useful than openmoocow :D No offence... I love openmoocow! /Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: OpenMooCow 0.3
i can confirm that the addition of a category is necessary in order for the icon to appear... Am Freitag, den 19.12.2008, 14:44 +1300 schrieb Harald Zophon Zophoniasson: 2008/12/19 Thomas White ta...@cam.ac.uk OpenMooCow 0.3 is now available: http://www.srcf.ucam.org/~taw27/openmoko/openmoocow/ Changes since version 0.2 are: - My finest programmer art has been banished to a suitable place, namely the fiery depths of Hades. It's been replaced with some much better graphics from openclipart.org. It's a public domain image, but I thought I'd give a credit to user bsantos who created the picture. - Disables the accelerometer threshold while it's running. This makes the cow a lot more responsive. Your old threshold will be restored on exit, unless the threshold value has been changed from zero since MooCow started, in which case it won't restore the old one. - Ready for kernel 2.6.28 - aware of the new sysfs paths. - Thinkpad HDAPS support from Joachim Breitner has been merged in. Comments or abuse to this address. Tom ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community Hi, Thanks for the graphics improvement ;-), I think it was necessary. Works fine on SHR, just one thing I have to change the .desktop and add a category (for example Applications), in order to have the shortcut displayed. cheers -- Harald Zophon Zophoniasson www.zophon.net ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: OpenMooCow 0.3
speech-dispatcher on 2008.9 also killed all audio (phone, mplayer, sms beeps, ...) after suspend/resume. Was ok before the first suspend. Billk On Fri, 2008-12-19 at 22:54 +0100, Petr Vanek wrote: I've seen audio break before due to a mismatch of kernel modules. Does audio work in any other programs for you? I had the same problem... modprobe snd-pcm-oss helped :-) sorry to reply on wrong place in thread but gmane news server sometimes doesn't have the message available... /etc/init.d/speech-dispatcher stop was the right solution for me, therefore i presume for all SHR users... cheers -- Petr Vaněk ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community -- William Kenworthy bi...@iinet.net.au Home in Perth! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
OpenMooCow 0.3
OpenMooCow 0.3 is now available: http://www.srcf.ucam.org/~taw27/openmoko/openmoocow/ Changes since version 0.2 are: - My finest programmer art has been banished to a suitable place, namely the fiery depths of Hades. It's been replaced with some much better graphics from openclipart.org. It's a public domain image, but I thought I'd give a credit to user bsantos who created the picture. - Disables the accelerometer threshold while it's running. This makes the cow a lot more responsive. Your old threshold will be restored on exit, unless the threshold value has been changed from zero since MooCow started, in which case it won't restore the old one. - Ready for kernel 2.6.28 - aware of the new sysfs paths. - Thinkpad HDAPS support from Joachim Breitner has been merged in. Comments or abuse to this address. Tom ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: OpenMooCow 0.3
2008/12/19 Thomas White ta...@cam.ac.uk OpenMooCow 0.3 is now available: http://www.srcf.ucam.org/~taw27/openmoko/openmoocow/http://www.srcf.ucam.org/%7Etaw27/openmoko/openmoocow/ Changes since version 0.2 are: - My finest programmer art has been banished to a suitable place, namely the fiery depths of Hades. It's been replaced with some much better graphics from openclipart.org. It's a public domain image, but I thought I'd give a credit to user bsantos who created the picture. - Disables the accelerometer threshold while it's running. This makes the cow a lot more responsive. Your old threshold will be restored on exit, unless the threshold value has been changed from zero since MooCow started, in which case it won't restore the old one. - Ready for kernel 2.6.28 - aware of the new sysfs paths. - Thinkpad HDAPS support from Joachim Breitner has been merged in. Comments or abuse to this address. Tom ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community Hi, Thanks for the graphics improvement ;-), I think it was necessary. Works fine on SHR, just one thing I have to change the .desktop and add a category (for example Applications), in order to have the shortcut displayed. cheers -- Harald Zophon Zophoniasson www.zophon.net ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
