Re: [Nut-upsuser] powerware 3110 USB

2008-01-11 Thread Kjell Claesson 
Hi Patrick,

Den Wednesday 09 January 2008 05.11.57 skrev Patrick Ohearn:
 Hello,
 I am attempting to monitor my two Powerware 3110 UPS from Gentoo Linux
 using nut-2.2.0, kernel-2.6.22.1 via USB. From what I can gather around
 the net (circa 2005) things with USB on this UPS just didn't work. Has
 this changed and is there anything I can do to help?

There is a fix (committed today) in the trunk. So if you can grab
the code from svn (trunk) and build it.

I can not garanti that it works. But as you say  

quote
is there anything I can do to help?
unquote

You can test this out for us.

The ups.conf should look like this.

 [ups-router]
 driver = bcmxcp_usb
 port = auto
 desc = Powerware 3110 - Router

I use Gentoo also. I have a patched nut-2.2.1.tar.gz so I
copied the /usr/portage/sys-power/nut to overlay,
and copied the nut-2.2.0.ebuild to nut-2.2.1.ebuild.

This is fare more simple than building from svn as
you need to set all the config parameters to get it installed
in the right place.
 
Regards
Kjell

___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser

[Nut-upsuser] powerware 3110 USB

2008-01-08 Thread Patrick Ohearn 
Hello,
I am attempting to monitor my two Powerware 3110 UPS from Gentoo Linux
using nut-2.2.0, kernel-2.6.22.1 via USB. From what I can gather around
the net (circa 2005) things with USB on this UPS just didn't work. Has
this changed and is there anything I can do to help?

My ups.conf contains the following...

[ups-router]
driver = usbhid-ups
port = auto
desc = Powerware 3110 - Router

[ups-server]
driver = usbhid-ups
port = auto
desc = Powerware 3110 - Server


and upsdrvctl start reveals the following...

Network UPS Tools - UPS driver controller 2.2.0
Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30
(2.2.0)

No matching HID UPS found
Driver failed to start (exit status=1)
Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30
(2.2.0)

No matching HID UPS found
Driver failed to start (exit status=1)


Is there anything else I can do to debug this situation?



___
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser