Re: [storage-discuss] FC hba configuration
From the cfgadm -al output it appears there is no storage available to the HBA. If there was, it would look something like this: Ap_Id Type Receptacle Occupant Condition c0 scsi-bus connectedconfigured unknown c0::dsk/c0t6d0 CD-ROM connectedconfigured unknown c1 fc-private connectedconfigured unknown c1::2120379cb9bb disk connectedconfigured unknown c2 scsi-bus connectedunconfigured unknown c5 fc-fabricconnectedunconfigured unknown c5::10e0024302c0 tape connectedunconfigured unknown c5::21008708d98d disk connectedunconfigured unknown c5::2120372a4076 disk connectedunconfigured unknown c5::50020f23588a disk connectedunconfigured unknown c5::50060e8014422e51 disk connectedunconfigured unknown c5::50060e8014422e61 disk connectedunconfigured unknown c5::50060e8014422e71 disk connectedunconfigured unknown c5::50060e8014422e76 disk connectedunconfigured unknown Double check that the McData, with no zoning, will allow devices to talk to each other. On QLogic FC switches there is a switch parameter called default zoning visibility that controls if devices can talk when there is no zone. This message posted from opensolaris.org ___ storage-discuss mailing list storage-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/storage-discuss
[storage-discuss] FC hba configuration
Has anyone else had trouble getting the hba to configure? hw - v210 hba qla2460 from the OK prompt - test-all shows the hba fcinfo hba-port HBA Port WWN: 21e08b8a7f75 OS Device Name: /dev/cfg/c3 Manufacturer: QLogic Corp. Model: QLA2460 Firmware Version: 4.0.27 FCode/BIOS Version: QLA2460 Host Adapter Driver(SPARC): 1.11 10/03/05 Type: N-port State: online Supported Speeds: 1Gb 2Gb 4Gb Current Speed: 4Gb Node WWN: 20e08b8a7f75 luxadm -e port /devices/[EMAIL PROTECTED],70/SUNW,[EMAIL PROTECTED]/[EMAIL PROTECTED],0:devctlNOT CONNECTED cfgadm -al Ap_Id Type Receptacle Occupant Condition c0 scsi-bus connectedconfigured unknown c0::dsk/c0t0d0 CD-ROM connectedconfigured unknown c1 scsi-bus connectedconfigured unknown c1::dsk/c1t0d0 disk connectedconfigured unknown c1::dsk/c1t1d0 disk connectedconfigured unknown c2 scsi-bus connectedunconfigured unknown c3 fc-fabricconnectedunconfigured unknown cfgadm -c configure c3 bash-3.00# cfgadm -al Ap_Id Type Receptacle Occupant Condition c0 scsi-bus connectedconfigured unknown c0::dsk/c0t0d0 CD-ROM connectedconfigured unknown c1 scsi-bus connectedconfigured unknown c1::dsk/c1t0d0 disk connectedconfigured unknown c1::dsk/c1t1d0 disk connectedconfigured unknown c2 scsi-bus connectedunconfigured unknown c3 fc-fabricconnectedunconfigured unknown from the McData switch, I can see the WWN for the v210, status is good, but I can't seem to get the cfgadm to configure the hba? The other side of the McData is a SAN with LUNs configured. No zoning or masking. --Geff This message posted from opensolaris.org ___ storage-discuss mailing list storage-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/storage-discuss
Re: [storage-discuss] FC hba configuration
Yeah! I know what it's supposed to look like - my question is: Why, when I configure the attachment point, it seems that the command is ignored? here's the McData switch configuration for the port Port Number:0 Port Name: v210-1 Port Type: F Port Operating Speed:4 Gb/sec Fiber Channel Address: 610013 Port WWN: 20:00:08:00:88:E3:42:61 Attached Port WWN: 21:00:00:E0:8B:8A:7F:75 Block Configuration:Unblocked Beaconing: Disabled FAN Configuration: Enabled Rx BB Credit: 6 Operational State: Online Reason: None I have a v490 attached to the same switch, it sees the LUNs? --Geff This message posted from opensolaris.org ___ storage-discuss mailing list storage-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/storage-discuss
[storage-discuss] iSNS project integration to Nevada
For those who have followed up the Solaris iSNS server project, the server and administration CLI have been integrated to Solaris Nevada build 77 which will be next openSolaris NWS build. I have updated the project webpage http://www.opensolaris.org/os/project/isns with the latest status. Manpages isns.1M and isnsadm.1M have been uploaded along with Sun Cluster based backup server deployment write-up. --Hyon ___ storage-discuss mailing list storage-discuss@opensolaris.org http://mail.opensolaris.org/mailman/listinfo/storage-discuss
