Re: How to receive MO on an SMPP link
: In that case, you must declare transceiver-mode variable to true. Omit receive-port variable. Check the userguide, under SMPP 3.4 section. Regards. On 8/29/07, lekkie omotayo [EMAIL PROTECTED] wrote: Thanks for quick response. Yes, they have transceiver. If the operator has a transceiver connection, how can I can get the inbound messages from my operator? How to I set up the config? What if my operator only supports transmitter/Receiver connection? Kind regards, Lekkie On 8/29/07, Rodrigo Cremaschi [EMAIL PROTECTED] wrote: Could this be because of the kannel version I am using (1.4.1)? No Is it possible to receive SMS on SMPP connection? Yes, that's what Kannel is for. Are you sure your operator needs 2 connetcions Tx and Rx? Or is it a transceiver? On 8/29/07, lekkie [EMAIL PROTECTED] wrote: Hi guys, I am trying to connect kannel to my mobile operator through an SMPP connection. However, my kannel box seem not to be listening on the receiver port I specified. It ws able to connect to my operator on the transmitter port, but it never listen on the specified receive-port. With some googling, I found out, I can only get a receiver connection by creating two separate SMSC configs using one as a transmitter the other as a receiver. I was advised to set transceiver mode to no, set the receive-port option to 0 (set transmit port) if I want to transmit and set transmit port to 0 if I want to receive (set receive port to 2001). When I did this, the log file told me I had a receiver bind however, kannel connects to the operator's SMSC on the receiver port even though transmitter port is set to 0. However, when I tried setting both port to same port, I ended up having two connections to SMSC both connection to the operator's port while source port was not open However, when I tried setting both port to diff port, I ended up having one connection to SMSC. I am afraid my config file may be wrong. Is there a way I can do this. Do I need 1 smsc config to achieve both transmitter and receiver connection? Do I need 1 smsbox config to achieve both transmitter and receiver connection? Could this be because of the kannel version I am using ( 1.4.1)? Is it possible to receive SMS on SMPP connection? Thanks. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12426727 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12433703 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12449107 Sent from the Kannel - User mailing list archive at Nabble.com.
Re: How to receive MO on an SMPP link
encountered. If you talked to the the carrier guys, what did they say? So we can find out if Kannel, or the connection, or the SMSC has any kind of problem. Regards, Rodrigo. On 8/31/07, lekkie [EMAIL PROTECTED] wrote: How do I route incoming messages from SMPP Link? Rodrigo Cremaschi wrote: In that case, you must declare transceiver-mode variable to true. Omit receive-port variable. Check the userguide, under SMPP 3.4 section. Regards. On 8/29/07, lekkie omotayo [EMAIL PROTECTED] wrote: Thanks for quick response. Yes, they have transceiver. If the operator has a transceiver connection, how can I can get the inbound messages from my operator? How to I set up the config? What if my operator only supports transmitter/Receiver connection? Kind regards, Lekkie On 8/29/07, Rodrigo Cremaschi [EMAIL PROTECTED] wrote: Could this be because of the kannel version I am using (1.4.1)? No Is it possible to receive SMS on SMPP connection? Yes, that's what Kannel is for. Are you sure your operator needs 2 connetcions Tx and Rx? Or is it a transceiver? On 8/29/07, lekkie [EMAIL PROTECTED] wrote: Hi guys, I am trying to connect kannel to my mobile operator through an SMPP connection. However, my kannel box seem not to be listening on the receiver port I specified. It ws able to connect to my operator on the transmitter port, but it never listen on the specified receive-port. With some googling, I found out, I can only get a receiver connection by creating two separate SMSC configs using one as a transmitter the other as a receiver. I was advised to set transceiver mode to no, set the receive-port option to 0 (set transmit port) if I want to transmit and set transmit port to 0 if I want to receive (set receive port to 2001). When I did this, the log file told me I had a receiver bind however, kannel connects to the operator's SMSC on the receiver port even though transmitter port is set to 0. However, when I tried setting both port to same port, I ended up having two connections to SMSC both connection to the operator's port while source port was not open However, when I tried setting both port to diff port, I ended up having one connection to SMSC. I am afraid my config file may be wrong. Is there a way I can do this. Do I need 1 smsc config to achieve both transmitter and receiver connection? Do I need 1 smsbox config to achieve both transmitter and receiver connection? Could this be because of the kannel version I am using ( 1.4.1)? Is it possible to receive SMS on SMPP connection? Thanks. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12426727 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12433703 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12449107 Sent from the Kannel - User mailing list archive at Nabble.com.
Re: How to receive MO on an SMPP link
be wrong. Is there a way I can do this. Do I need 1 smsc config to achieve both transmitter and receiver connection? Do I need 1 smsbox config to achieve both transmitter and receiver connection? Could this be because of the kannel version I am using ( 1.4.1)? Is it possible to receive SMS on SMPP connection? Thanks. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12426727 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12433703 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12449107 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12450240 Sent from the Kannel - User mailing list archive at Nabble.com.
Re: How to receive MO on an SMPP link
port I specified. It ws able to connect to my operator on the transmitter port, but it never listen on the specified receive-port. With some googling, I found out, I can only get a receiver connection by creating two separate SMSC configs using one as a transmitter the other as a receiver. I was advised to set transceiver mode to no, set the receive-port option to 0 (set transmit port) if I want to transmit and set transmit port to 0 if I want to receive (set receive port to 2001). When I did this, the log file told me I had a receiver bind however, kannel connects to the operator's SMSC on the receiver port even though transmitter port is set to 0. However, when I tried setting both port to same port, I ended up having two connections to SMSC both connection to the operator's port while source port was not open However, when I tried setting both port to diff port, I ended up having one connection to SMSC. I am afraid my config file may be wrong. Is there a way I can do this. Do I need 1 smsc config to achieve both transmitter and receiver connection? Do I need 1 smsbox config to achieve both transmitter and receiver connection? Could this be because of the kannel version I am using ( 1.4.1)? Is it possible to receive SMS on SMPP connection? Thanks. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12426727 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12433703 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12449107 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12450240 Sent from the Kannel - User mailing list archive at Nabble.com. -- Alejandro Guerrieri Magicom http://www.magicom-bcn.net/ LinkedIn: http://www.linkedin.com/in/aguerrieri
Re: How to receive MO on an SMPP link
operator through an SMPP connection. However, my kannel box seem not to be listening on the receiver port I specified. It ws able to connect to my operator on the transmitter port, but it never listen on the specified receive-port. With some googling, I found out, I can only get a receiver connection by creating two separate SMSC configs using one as a transmitter the other as a receiver. I was advised to set transceiver mode to no, set the receive-port option to 0 (set transmit port) if I want to transmit and set transmit port to 0 if I want to receive (set receive port to 2001). When I did this, the log file told me I had a receiver bind however, kannel connects to the operator's SMSC on the receiver port even though transmitter port is set to 0. However, when I tried setting both port to same port, I ended up having two connections to SMSC both connection to the operator's port while source port was not open However, when I tried setting both port to diff port, I ended up having one connection to SMSC. I am afraid my config file may be wrong. Is there a way I can do this. Do I need 1 smsc config to achieve both transmitter and receiver connection? Do I need 1 smsbox config to achieve both transmitter and receiver connection? Could this be because of the kannel version I am using ( 1.4.1)? Is it possible to receive SMS on SMPP connection? Thanks. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12426727 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12433703 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12449107 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12450240 Sent from the Kannel - User mailing list archive at Nabble.com. -- Alejandro Guerrieri Magicom http://www.magicom-bcn.net/ LinkedIn: http://www.linkedin.com/in/aguerrieri -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12450892 Sent from the Kannel - User mailing list archive at Nabble.com.
Re: How to receive MO on an SMPP link
How do I route incoming messages from SMPP Link? Rodrigo Cremaschi wrote: In that case, you must declare transceiver-mode variable to true. Omit receive-port variable. Check the userguide, under SMPP 3.4 section. Regards. On 8/29/07, lekkie omotayo [EMAIL PROTECTED] wrote: Thanks for quick response. Yes, they have transceiver. If the operator has a transceiver connection, how can I can get the inbound messages from my operator? How to I set up the config? What if my operator only supports transmitter/Receiver connection? Kind regards, Lekkie On 8/29/07, Rodrigo Cremaschi [EMAIL PROTECTED] wrote: Could this be because of the kannel version I am using (1.4.1)? No Is it possible to receive SMS on SMPP connection? Yes, that's what Kannel is for. Are you sure your operator needs 2 connetcions Tx and Rx? Or is it a transceiver? On 8/29/07, lekkie [EMAIL PROTECTED] wrote: Hi guys, I am trying to connect kannel to my mobile operator through an SMPP connection. However, my kannel box seem not to be listening on the receiver port I specified. It ws able to connect to my operator on the transmitter port, but it never listen on the specified receive-port. With some googling, I found out, I can only get a receiver connection by creating two separate SMSC configs using one as a transmitter the other as a receiver. I was advised to set transceiver mode to no, set the receive-port option to 0 (set transmit port) if I want to transmit and set transmit port to 0 if I want to receive (set receive port to 2001). When I did this, the log file told me I had a receiver bind however, kannel connects to the operator's SMSC on the receiver port even though transmitter port is set to 0. However, when I tried setting both port to same port, I ended up having two connections to SMSC both connection to the operator's port while source port was not open However, when I tried setting both port to diff port, I ended up having one connection to SMSC. I am afraid my config file may be wrong. Is there a way I can do this. Do I need 1 smsc config to achieve both transmitter and receiver connection? Do I need 1 smsbox config to achieve both transmitter and receiver connection? Could this be because of the kannel version I am using ( 1.4.1)? Is it possible to receive SMS on SMPP connection? Thanks. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12426727 Sent from the Kannel - User mailing list archive at Nabble.com.
Re: How to receive MO on an SMPP link
Hi Lekkie, Tell us what have you done so far, and what problems have you encountered. If you talked to the the carrier guys, what did they say? So we can find out if Kannel, or the connection, or the SMSC has any kind of problem. Regards, Rodrigo. On 8/31/07, lekkie [EMAIL PROTECTED] wrote: How do I route incoming messages from SMPP Link? Rodrigo Cremaschi wrote: In that case, you must declare transceiver-mode variable to true. Omit receive-port variable. Check the userguide, under SMPP 3.4 section. Regards. On 8/29/07, lekkie omotayo [EMAIL PROTECTED] wrote: Thanks for quick response. Yes, they have transceiver. If the operator has a transceiver connection, how can I can get the inbound messages from my operator? How to I set up the config? What if my operator only supports transmitter/Receiver connection? Kind regards, Lekkie On 8/29/07, Rodrigo Cremaschi [EMAIL PROTECTED] wrote: Could this be because of the kannel version I am using (1.4.1)? No Is it possible to receive SMS on SMPP connection? Yes, that's what Kannel is for. Are you sure your operator needs 2 connetcions Tx and Rx? Or is it a transceiver? On 8/29/07, lekkie [EMAIL PROTECTED] wrote: Hi guys, I am trying to connect kannel to my mobile operator through an SMPP connection. However, my kannel box seem not to be listening on the receiver port I specified. It ws able to connect to my operator on the transmitter port, but it never listen on the specified receive-port. With some googling, I found out, I can only get a receiver connection by creating two separate SMSC configs using one as a transmitter the other as a receiver. I was advised to set transceiver mode to no, set the receive-port option to 0 (set transmit port) if I want to transmit and set transmit port to 0 if I want to receive (set receive port to 2001). When I did this, the log file told me I had a receiver bind however, kannel connects to the operator's SMSC on the receiver port even though transmitter port is set to 0. However, when I tried setting both port to same port, I ended up having two connections to SMSC both connection to the operator's port while source port was not open However, when I tried setting both port to diff port, I ended up having one connection to SMSC. I am afraid my config file may be wrong. Is there a way I can do this. Do I need 1 smsc config to achieve both transmitter and receiver connection? Do I need 1 smsbox config to achieve both transmitter and receiver connection? Could this be because of the kannel version I am using ( 1.4.1)? Is it possible to receive SMS on SMPP connection? Thanks. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12426727 Sent from the Kannel - User mailing list archive at Nabble.com.
Re: How to receive MO on an SMPP link
listen on the specified receive-port. With some googling, I found out, I can only get a receiver connection by creating two separate SMSC configs using one as a transmitter the other as a receiver. I was advised to set transceiver mode to no, set the receive-port option to 0 (set transmit port) if I want to transmit and set transmit port to 0 if I want to receive (set receive port to 2001). When I did this, the log file told me I had a receiver bind however, kannel connects to the operator's SMSC on the receiver port even though transmitter port is set to 0. However, when I tried setting both port to same port, I ended up having two connections to SMSC both connection to the operator's port while source port was not open However, when I tried setting both port to diff port, I ended up having one connection to SMSC. I am afraid my config file may be wrong. Is there a way I can do this. Do I need 1 smsc config to achieve both transmitter and receiver connection? Do I need 1 smsbox config to achieve both transmitter and receiver connection? Could this be because of the kannel version I am using ( 1.4.1)? Is it possible to receive SMS on SMPP connection? Thanks. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12426727 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12427657 Sent from the Kannel - User mailing list archive at Nabble.com.
Re: How to receive MO on an SMPP link
connetcions Tx and Rx? Or is it a transceiver? On 8/29/07, lekkie [EMAIL PROTECTED] wrote: Hi guys, I am trying to connect kannel to my mobile operator through an SMPP connection. However, my kannel box seem not to be listening on the receiver port I specified. It ws able to connect to my operator on the transmitter port, but it never listen on the specified receive-port. With some googling, I found out, I can only get a receiver connection by creating two separate SMSC configs using one as a transmitter the other as a receiver. I was advised to set transceiver mode to no, set the receive-port option to 0 (set transmit port) if I want to transmit and set transmit port to 0 if I want to receive (set receive port to 2001). When I did this, the log file told me I had a receiver bind however, kannel connects to the operator's SMSC on the receiver port even though transmitter port is set to 0. However, when I tried setting both port to same port, I ended up having two connections to SMSC both connection to the operator's port while source port was not open However, when I tried setting both port to diff port, I ended up having one connection to SMSC. I am afraid my config file may be wrong. Is there a way I can do this. Do I need 1 smsc config to achieve both transmitter and receiver connection? Do I need 1 smsbox config to achieve both transmitter and receiver connection? Could this be because of the kannel version I am using ( 1.4.1)? Is it possible to receive SMS on SMPP connection? Thanks. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12426727 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12433703 Sent from the Kannel - User mailing list archive at Nabble.com.
Re: How to receive MO on an SMPP link
can I can get the inbound messages from my operator? How to I set up the config? What if my operator only supports transmitter/Receiver connection? Kind regards, Lekkie On 8/29/07, Rodrigo Cremaschi [EMAIL PROTECTED] wrote: Could this be because of the kannel version I am using (1.4.1)? No Is it possible to receive SMS on SMPP connection? Yes, that's what Kannel is for. Are you sure your operator needs 2 connetcions Tx and Rx? Or is it a transceiver? On 8/29/07, lekkie [EMAIL PROTECTED] wrote: Hi guys, I am trying to connect kannel to my mobile operator through an SMPP connection. However, my kannel box seem not to be listening on the receiver port I specified. It ws able to connect to my operator on the transmitter port, but it never listen on the specified receive-port. With some googling, I found out, I can only get a receiver connection by creating two separate SMSC configs using one as a transmitter the other as a receiver. I was advised to set transceiver mode to no, set the receive-port option to 0 (set transmit port) if I want to transmit and set transmit port to 0 if I want to receive (set receive port to 2001). When I did this, the log file told me I had a receiver bind however, kannel connects to the operator's SMSC on the receiver port even though transmitter port is set to 0. However, when I tried setting both port to same port, I ended up having two connections to SMSC both connection to the operator's port while source port was not open However, when I tried setting both port to diff port, I ended up having one connection to SMSC. I am afraid my config file may be wrong. Is there a way I can do this. Do I need 1 smsc config to achieve both transmitter and receiver connection? Do I need 1 smsbox config to achieve both transmitter and receiver connection? Could this be because of the kannel version I am using ( 1.4.1)? Is it possible to receive SMS on SMPP connection? Thanks. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12426727 Sent from the Kannel - User mailing list archive at Nabble.com. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12433703 Sent from the Kannel - User mailing list archive at Nabble.com.
How to receive MO on an SMPP link
Hi guys, I am trying to connect kannel to my mobile operator through an SMPP connection. However, my kannel box seem not to be listening on the receiver port I specified. It ws able to connect to my operator on the transmitter port, but it never listen on the specified receive-port. With some googling, I found out, I can only get a receiver connection by creating two separate SMSC configs using one as a transmitter the other as a receiver. I was advised to set transceiver mode to no, set the receive-port option to 0 (set transmit port) if I want to transmit and set transmit port to 0 if I want to receive (set receive port to 2001). When I did this, the log file told me I had a receiver bind however, kannel connects to the operator's SMSC on the receiver port even though transmitter port is set to 0. However, when I tried setting both port to same port, I ended up having two connections to SMSC both connection to the operator's port while source port was not open However, when I tried setting both port to diff port, I ended up having one connection to SMSC. I am afraid my config file may be wrong. Is there a way I can do this. Do I need 1 smsc config to achieve both transmitter and receiver connection? Do I need 1 smsbox config to achieve both transmitter and receiver connection? Could this be because of the kannel version I am using (1.4.1)? Is it possible to receive SMS on SMPP connection? Thanks. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 Sent from the Kannel - User mailing list archive at Nabble.com.
Re: How to receive MO on an SMPP link
Could this be because of the kannel version I am using (1.4.1)? No Is it possible to receive SMS on SMPP connection? Yes, that's what Kannel is for. Are you sure your operator needs 2 connetcions Tx and Rx? Or is it a transceiver? On 8/29/07, lekkie [EMAIL PROTECTED] wrote: Hi guys, I am trying to connect kannel to my mobile operator through an SMPP connection. However, my kannel box seem not to be listening on the receiver port I specified. It ws able to connect to my operator on the transmitter port, but it never listen on the specified receive-port. With some googling, I found out, I can only get a receiver connection by creating two separate SMSC configs using one as a transmitter the other as a receiver. I was advised to set transceiver mode to no, set the receive-port option to 0 (set transmit port) if I want to transmit and set transmit port to 0 if I want to receive (set receive port to 2001). When I did this, the log file told me I had a receiver bind however, kannel connects to the operator's SMSC on the receiver port even though transmitter port is set to 0. However, when I tried setting both port to same port, I ended up having two connections to SMSC both connection to the operator's port while source port was not open However, when I tried setting both port to diff port, I ended up having one connection to SMSC. I am afraid my config file may be wrong. Is there a way I can do this. Do I need 1 smsc config to achieve both transmitter and receiver connection? Do I need 1 smsbox config to achieve both transmitter and receiver connection? Could this be because of the kannel version I am using (1.4.1)? Is it possible to receive SMS on SMPP connection? Thanks. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 Sent from the Kannel - User mailing list archive at Nabble.com.
Re: How to receive MO on an SMPP link
In that case, you must declare transceiver-mode variable to true. Omit receive-port variable. Check the userguide, under SMPP 3.4 section. Regards. On 8/29/07, lekkie omotayo [EMAIL PROTECTED] wrote: Thanks for quick response. Yes, they have transceiver. If the operator has a transceiver connection, how can I can get the inbound messages from my operator? How to I set up the config? What if my operator only supports transmitter/Receiver connection? Kind regards, Lekkie On 8/29/07, Rodrigo Cremaschi [EMAIL PROTECTED] wrote: Could this be because of the kannel version I am using (1.4.1)? No Is it possible to receive SMS on SMPP connection? Yes, that's what Kannel is for. Are you sure your operator needs 2 connetcions Tx and Rx? Or is it a transceiver? On 8/29/07, lekkie [EMAIL PROTECTED] wrote: Hi guys, I am trying to connect kannel to my mobile operator through an SMPP connection. However, my kannel box seem not to be listening on the receiver port I specified. It ws able to connect to my operator on the transmitter port, but it never listen on the specified receive-port. With some googling, I found out, I can only get a receiver connection by creating two separate SMSC configs using one as a transmitter the other as a receiver. I was advised to set transceiver mode to no, set the receive-port option to 0 (set transmit port) if I want to transmit and set transmit port to 0 if I want to receive (set receive port to 2001). When I did this, the log file told me I had a receiver bind however, kannel connects to the operator's SMSC on the receiver port even though transmitter port is set to 0. However, when I tried setting both port to same port, I ended up having two connections to SMSC both connection to the operator's port while source port was not open However, when I tried setting both port to diff port, I ended up having one connection to SMSC. I am afraid my config file may be wrong. Is there a way I can do this. Do I need 1 smsc config to achieve both transmitter and receiver connection? Do I need 1 smsbox config to achieve both transmitter and receiver connection? Could this be because of the kannel version I am using ( 1.4.1)? Is it possible to receive SMS on SMPP connection? Thanks. -- View this message in context: http://www.nabble.com/How-to-receive-MO-on-an-SMPP-link-tf4350019.html#a12394561 Sent from the Kannel - User mailing list archive at Nabble.com.