Jason,
I have been experiencing problems with 3590 K-Type tapes as well and it has been well
over 5 months since we have upgraded from B1A/E1A to H1A. You may be running into an
APAR that support informed me on last month where you have to mark the volumes as
READOnly to get them to mount. See
Test.
Demetrius Malbrough
Tivoli Certified Consultant
IBM Certified Specialist
FC-SAN Certified Professional
[EMAIL PROTECTED]
www.giga-stor.com
Debi,
You did not mention what SCHEDMode you are using? If it is polling try using prompted
mode so the client can contact the server at the specified time. Also, are these
windows servers being rebooted often?
Regards,
Demetrius Malbrough
---Original Message---
gt; From:
Juan,
Whatever ip address you supply in the dsm.sys file for TCPSERVERADDRESS whether it is
a css switch or 10/100 Ethernet, it does not matter to AIX. You will be limited to the
performance of the network. You have to run cfgmgr -v to allow TSM to walk the Device
Bus and locate your tape
Bill,
We do not back up the log.nsf files either because they are non-critical to the
recovery of Lotus Domino. This file is often recreated during maintenance and
that file will become either log1.nsf, log2.nsf, etc and placed in the mail2 folder
under subfolder logs. It will be considered a
Stephan,
Yes, this is a message that happens quite often with Windows clients. I have seen that
this happens when the server is rebooted overnight and upon start-up TSM has problems
starting the TSM Scheduler service again. Under the Scheduler properties and the
'RECOVERY' tab, set 'First
Well, SWIT3! The volumes have to be already labelled checked into the
library as SCRATCH volumes. Then, TSM will automatically mount a SCRATCH
volume and proceed with the data write. If not you will have numerous
insufficient space errors in the activity log.
Thanks,
Demetrius A. Malbrough
Kelvin,
That is a manual process. You will have to move the files from one storage
pool volume to other storage pool volumes. You can move files from a primary
storage pool volume only to volumes in the same or a different primary
storage pool. You can move files from a copy storage pool volume
