The only other option (again quoting from the manual):
External signal input (across
terminals 2 (4)-5, multi-speed selection)
which is even _less_ appropriate.
On 3/2/24 05:00, andy pugh wrote:
On Sat, 2 Mar 2024 at 02:37, lloyd wilson wrote:
- operation mode (param. 79) set to 1
munication parity check
0
124
PU communication CR/LF selection
0
160 Extended function display selection 0
298
Frequency search gain
39
340
Communication startup mode selection
1
551
PU mode operation command source selection
4
Hope this helps!,
Thaddeus
On Mar 1, 2024, at 7:34 AM, ll
I'm using a Mitsubishi E500 VFD for spindle drive on the VMC I'm
retrofitting & can't get variable speed to cooperate. The mitsub_vfd
program operates properly (I think)- run/stop behaves as expected, speed
commands are generated and accepted by the VFD, but the motor speed
stays the same. I
tried that, multiple slots, 2 different machines, same behavior. looks
like an order is in order.
On 1/12/23 3:51 PM, Peter C. Wallace wrote:
On Thu, 12 Jan 2023, lloyd wilson wrote:
Date: Thu, 12 Jan 2023 15:34:15 -0500
From: lloyd wilson
Reply-To: "Enhanced Machine Controller
I'm setting up a VMC machine, using a re-purposed Mesa 5i20 card (card
is about a decade old). When attempting to configure the card, I get the
following:
bport@bport:~$ halrun -I
halcmd: loadrt hostmot2
Note: Using POSIX realtime
hm2: loading Mesa HostMot2 driver version 0.15
halcmd: loadrt
trying to setup the environment to build LCNC from source. System has
2.8.4 upgrade from an fresh 2.8.2 ISO download, nothing else has been
loaded. After downloading current source package from the git
repository, ran configure script, which kicked out @ several points;
retrieved indicated
, 10 mar 2021 a las 13:53, lloyd wilson ()
escribió:
I'm having trouble getting the new 2.8 external offset functionality to
play nicely. Most of the (known) steps are working (as observed in the
hal watch screen):
- axis.a.eoffset-enable is set true.
- inputs (step up & down) gene
I'm having trouble getting the new 2.8 external offset functionality to
play nicely. Most of the (known) steps are working (as observed in the
hal watch screen):
- axis.a.eoffset-enable is set true.
- inputs (step up & down) generate appropriate values in
axis.a.eoffset-counts
- offset
I've recently acquired another controller transplant candidate, a
mid/late 80s Bridgeport 520 vmc. The old girl uses Fanuc DC (yellow
cap) axis servos and drives, spindle is also Fanuc. I hope to keep the
Fanuc servo drives, but so far, I haven't been able to locate any
documents that spec
I just went to look at a '80s Bridgeport VMC with Heidenhain controller
and Fanuc yellow cap servos (didn't get inside a cabinet for closer
investigation - yet). The beast has a tool changer and a bad controller.
Anyone have experience with that particular configuration? Particularly,
what
nf to produce a configuration ,
>> you usually see a
>> sets spindle-at-speed true , this overides the spindle at speed
>> it may be in your postgui.hal file .
>> comment it out and you should be ok
>>
>>
>>
>>
>>
>>
>> On 29 Decemb
I'm trying to add a pyvcp panel to control a spindle vfd. To take
advantage of the 'at-speed' signal from the vfd to inhibit motion until
ready, the motion component of LCNC needs to be aware of the spindle
command state- from the documentation:
*motion.spindle-at-speed* IN BIT
Motion will
G90.1 is active, but the issue does not involve the circular arc - same
complaint occurs if I comment out the G2 line.
On 10/28/2015 01:53 AM, Craig Hodne wrote:
>
> On 10/27/2015 08:31 PM, lloyd wilson wrote:
>> (my misunderstanding, I'm sure)
>>
>> I'm investigating u
Version is 2.8-pre (download early last month), running the Axis simulator.
Selected tool (#1) is specified as .260" diameter in the tool table.
When I specify G41.1 D0.260, the program accepts the entry.
Complete program attached.
On 10/28/2015 08:30 AM, Jeff Epler wrote:
Can you please say
an update: I got the program to load properly by using longer lead-in
motions - under some circumstances the compensation function seems to
report a misleading error.
thanks to all who looked at the issue.
ldw
On 10/28/2015 08:59 AM, lloyd wilson wrote:
> Version is 2.8-pre (download ea
(my misunderstanding, I'm sure)
I'm investigating using the built-in cutter compensation, rather than
calculating absolute coordinates. The first program worked OK, but LCNC
complains about the following excerpt:
14: G41
15: G0X0.Y24.8610
16: G0Z-17.
17: M3
18:
I think I've solved the state change conundrum I asked about last week -
While watching the debug messages (using 0x11c0 debug setting), a
deactivation event occurred, causing a 'emcTaskPlanClose' event, but
nothing that indicated the precipitant event. I backed the machine to a
previous
While executing the inaugural program on my Hurco, I have had several
occurances of LCNC switching to the machine off state (not estop) at
random points in the program. I'm running 2.7-pre4 (unless it
auto-updated before going off-line). There are no error popups
associated with the turnoffs;
start deciphering the error message settings
thanks for quick responses
lloyd
On 08/03/2015 01:03 PM, Jon Elson wrote:
On 08/03/2015 09:31 AM, lloyd wilson wrote:
While executing the inaugural program on my Hurco, I have had several
occurances of LCNC switching to the machine off state
We are trying to adapt our Techno router (servo, not stepper) to use a
plasma torch I'm having some difficulty understanding how to utilize
the thcud hal component. Conceptually, it seems simple: the component
sits between the axis and pid modules of the z axis and adds a
correction to the
Just to close the loop (and hopefully not to rouse Murphy from his
benignant slumber) -
we changed the 5V power supply to the PPMC chassis and have seen no
further repeats of the system falling into e-stop during operation.
Thanks to all who responded
lloyd
Our Techno router has started exhibiting an issue that has defeated
several days of diagnostics; it's time to yell for help.
We are running LCNC version 2.5.0 through a Pico PPMC interface chassis
to the original servo amps. It has run in this configuration for over a
year.
For the last
Thanks - I thought I had seen one (shouldn't try to remember fleeting
technology references after the evening's glass of theraputic pinot!)
On 04/03/2014 11:08 PM, Sebastian Kuzminsky wrote:
On 04/03/2014 07:12 PM, lloyd wilson wrote:
A requirement has popped up for digitizing an object, so I
A requirement has popped up for digitizing an object, so I started
looking for a sample program to adapt. There is one reference in the
wiki to a program called emcProbe, which is dated 2005. No (at least on
the first few pages) references to that program show up on internet
searches, and no
Thanks for the reply - I discovered that yesterday by perusing an
include file from another C program linked with C++ -
hadn't had time to post reply.
On 02/18/2013 05:45 PM, Przemek Klosowski wrote:
On Sat, Feb 16, 2013 at 2:10 PM, lloyd wilson
llwilso...@rochester.rr.com wrote
I'm not sure if this should be posted here, on in development - it's a
programming question, but it's not an official part of LCNC. I'll start
here; if too arcane for this audience, feel free to suggest a re-direction.
I'm working on a user-space interface program for my Hurco mill control
I'm starting to work on a user interface program for a physical control
panel for my hurco mill can't get the makefile to cooperate. The
program will essentially provide a subset of the NML messages as defined
in halui, but with modbus communication rather that HAL. To verify the
build
Found the problem:
in the current build structure, first step needs to be
linuxcnc-dev/scripts/rip-environment
to setup the build environment
thanks all
-ldw
On 06/16/2012 10:28 PM, lloyd wilson wrote:
Curious - I still have a previous source environment (emc2-dev), as well
I'm trying to compile a new component built as a modification of the
homann modio package and can't get the makefile to cooperate; it keeps
exiting with a complaint about not finding the comp program.
The compile environment is healthy; I just did a make of the linuxcnc
package without
,
not a comp, is that step needed in the make process?
-ldw
On 06/16/2012 06:20 PM, Kirk Wallace wrote:
On Sat, 2012-06-16 at 16:51 -0400, lloyd wilson wrote:
I'm trying to compile a new component built as a modification of the
homann modio package and can't get the makefile to cooperate; it keeps
-16 at 19:22 -0400, lloyd wilson wrote:
Thanks for the quick reply; all files are in the same directory, which
I've tried placing in linuxcnc root and in the src directory; no change.
The find* scripts exist are executable; find-modinc is the script that
goes thud, even if run from the command
First, the Hurco is alive! I carved emc/axis into a piece of aluminum
yesterday; thanks to all the participants for creating supporting
emc/lcnc/linuxcnc/etc.
Now to the next level - I'm using a hall sensor to detect spindle rpm; I
get a clean low-going pulse each revolution, as expected.
negativity should work, understanding would be more satisfying.
-ldw
On 05/26/2012 12:12 PM, sam sokolik wrote:
could you negate the scale of the encoder counter?
sam
On 05/26/2012 10:21 AM, lloyd wilson wrote:
First, the Hurco is alive! I carved emc/axis into a piece of aluminum
On 05/26/2012 12:52 PM, Peter C. Wallace wrote:
snip
2. Some configurations do not have B inputs as they are just used for counting
applications. In this case the counter will always count down (since
unconnected inputs are terminated in a 0 state internally in the FPGA)
Peter Wallace
We are investigating using my favorite cnc controller for an application
which will require as much stiffness as we can arrange; websearching
suggests that torque mode rather than velocity mode is preferrred in
such applications. We are using a Pico PPMC interface set to mediate
between the
On 03/04/2011 08:52 PM, Frank Tkalcevic wrote:
That's in there because I do 95% of my development on Windows. I usually
develop stuff on windows then move it across to linux when it's almost done.
I still haven't found a development environment I like. (tried eclipse,
qtcreator, but have
On 03/05/2011 06:17 PM, Frank Tkalcevic wrote:
I'm guessing you are building on Ubuntu 10. Hidcomp was last built and
released on Ubuntu 8 (binaries tested on 10)
To build on Ubuntu 10...
Add to include/datatypes.h
#includesys/types.h
And in hid/lcddataformatter.cpp, add
I've downloaded the hidcomp package to use for learning to talk to usb
devices (last weeks Pokeys55, actually). When trying to compile the
package, I keep getting errors because of
#ifdef _WIN32
rgrep doesn't show it being set anywhere in the hid directory structure;
does anybody know where I
My son runs a Techno router (4 axis) in his business and may need to
upgrade the
the controller. We are curious if anyone has done a retrofit of one of
these machines to emc, and what, if any, are pitfalls to beware of.
He uses MasterCam, version X5 to generate the router files. The wiki
While dissecting the Hurco mill that I'm converting to EMC, I've
realized I don't know how lubrication is handled in CNC machines. This
one has an auto oiler (pneumatic driven), and a pump in the machine
base that evidently returns oil to the oiler unit.
There was a mechanical timer in the
I have been trying to attach a base database to a commercial application
built around the dbisam
(made by elevatesoft). I get some communication between base and the
odbc driver ( can see a list
of tables), but any attempt to open a table from the list generates an
sql error.
A year ago,
Try using getClass().getClassLoader().getResource(filename) this should do
the trick.
On Thu, 26 Jan 2006 15:42:13 -0500, Philip Denno [EMAIL PROTECTED] wrote:
Actually I found that if you give it the absolute path to the file it
works but relative paths do not. Is there something else I
org.apache.log4j.helpers.LogLog;
import org.apache.log4j.spi.LoggingEvent;
/**
* This class has been created to provide support for SMTP
* authentication and JNDI mail sessions.
*
* @author Lloyd Wilson
* @since 1.0
*/
public class SMTPAuthorizationAppender extends AppenderSkeleton
org.apache.log4j.helpers.LogLog;
import org.apache.log4j.spi.LoggingEvent;
/**
* This class has been created to provide support for SMTP
* authentication and JNDI mail sessions.
*
* @author Lloyd Wilson
* @since 1.0
*/
public class SMTPAuthorizationAppender extends AppenderSkeleton
Post your use of the bean:message tag. Could be a syntax problem.
-Original Message-
From: Tim Clotworthy [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 23, 2003 3:14 PM
To: Struts Users Mailing List
Subject: According to TLD, tag bean:message must be empty, but is not'
Can someone
Hello,
I have an urgent need to find a resolve to this problem.
First off, I sent a post about this the other day, but noone has yet to reply, so I
figure it could be either how I worded the question, or noone has encountered the
problem.
To describe the problem, I'll first start out by
://www.struts-atlanta.org
678-910-8017
AIM:jmitchtx
- Original Message -
From: Lloyd Wilson [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, July 10, 2003 12:06 PM
Subject: Multiple Application Modules
Hello,
I have an urgent need to find a resolve to this problem.
First off, I sent
[EMAIL PROTECTED]
To: Struts Users Mailing List [EMAIL PROTECTED]
Sent: Thursday, July 10, 2003 12:42 PM
Subject: Re: Multiple Application Modules
- Original Message -
From: Lloyd Wilson [EMAIL PROTECTED]
To: Struts Users Mailing List [EMAIL PROTECTED]
Sent: Thursday, July 10, 2003 12
and for module b you have defined
that its key=test?
I think that this is a yes.
sandeep
--- Lloyd Wilson [EMAIL PROTECTED] wrote:
How would I retrieve values from my message resource
bundle without a key??
Currently, I use the following to access a message
resource bundle for a given JSP page
I am using the 1.1 version of struts and was wondering if there is a way that you can
define message resource bundles for a given struts config module other than default?
Presently, I have the following setup in the web.xml:
config
config/module1
config/module2
I have 3 separate struts config
I've had a similar problem and the only way i've been able to resolve it is to do
something like the following:
tiles:useAttribute name=browserSubtitle /
bean:message key=% browserSubtitle.toString () % /
That should work as i'm doing something very similar.
HTH,
Cheers,
Lloyd Wilson
51 matches
Mail list logo