Hello Kevin P. Fleming,
Am 2012-05-25 12:03:39, hacktest Du folgendes herunter:
This does not make sense; PCI 2.0 cards should fit just fine into
PCI-X slots. Do you mean PCI-Express instead? That's very different.
No, it does not fit, since PCI 2.0 is 5V and has only one notch.
PCI 2.1, 2.2.
Hello,
For those customers with only analog lines, who ask for fax2email and
email2fax, whats the most reliable solution available and tested with
Asterisk?
Thanks
--
_
-- Bandwidth and Colocation Provided by
Thanks very much Mark for pointing that out to me.
Before, I have always been coding using DEVSTATE until my colleague downloaded
a new version of func_devstate.c which began to use DEVICE_STATE.
So, my old AEL2 script will need to be changed.
From: asterisk-users-boun...@lists.digium.com
Hi Matthew
Le 28/05/2012 19:28, Matthew J. Roth a écrit :
Administrator TOOTAI wrote:
we are upgrading our Asterisk production server from 1.6.24 to 1.8.12
version and face the following problem: one of our peer
(voicetrading.com) doesn't accept our calls anymore, we receive a
timeout error
- Original Message -
From: Jon Caum jon.c...@live.com
To: asterisk-users@lists.digium.com
Sent: Monday, May 28, 2012 11:21:06 PM
Subject: [asterisk-users] IMAP Voicemail
Hello all,
I quickly searched online prior to sending this, but if this was
previously brought up, I
On 05/29/2012 01:48 AM, Michelle Konzack wrote:
No, it does not fit, since PCI 2.0 is 5V and has only one notch.
PCI 2.1, 2.2. and 2.3 do have two notches, because they are 3.3V.
In clear, you can not insert old 5V PCI 2.0 cards into a 3.3V PCI-X slot
Ahh, your real issue is voltage then,
Finally I got it working by removing the pfsense firewall. Something to do
with pfsense firewall.
Regards
On Mon, May 28, 2012 at 2:36 PM, Gopalakrishnan N
gopalakrishnan...@gmail.com wrote:
Actually I understood that register line is not required, also since my
PBX is behind the pfsense
Administrator TOOTAI wrote:
We tested this setting this WE, effectively this problem disappear but
another appears: call get connected but no audio. We installed Asterisk
10.3.1 - connection and no audio too, so same behaviour.
We did read those files, don't see which parameter we could
hi,
i read a lot about CDR problems
this document is the best description of CDRs problem in Asterisk
http://svn.digium.com/svn/asterisk/team/murf/RFCs/CDRfix2.rfc.docx i found
but
i cant still answer my question
is it possible with simple CDR fully describe axfer? (axfer is asterisk
I recently bought 2 Beronet BN4S0 cards on eBay, each for under 100 €.
they have 4 S0 ports.
Sent from my iPad
Michael
Am 29.05.2012 um 14:18 schrieb Kevin P. Fleming kpflem...@digium.com:
On 05/29/2012 01:48 AM, Michelle Konzack wrote:
No, it does not fit, since PCI 2.0 is 5V and has only
I think what you want is CEL logging, cdr has design issues. If I am not
mistaken it's covered in asterisk wiki itself.
Sent from my iPhone
On May 29, 2012, at 8:57 PM, Marek Cervenka cerv...@fpf.slu.cz wrote:
hi,
i read a lot about CDR problems
this document is the best description of
On 29/05/2012 15:18, Kevin P. Fleming wrote:
On 05/29/2012 01:48 AM, Michelle Konzack wrote:
No, it does not fit, since PCI 2.0 is 5V and has only one notch.
PCI 2.1, 2.2. and 2.3 do have two notches, because they are 3.3V.
In clear, you can not insert old 5V PCI 2.0 cards into a 3.3V PCI-X
Hello,
Is there a way by which a SIP peer can only transfer an incoming call?
When I set 'allowtransfer=yes' the peer is able to transfer both outgoing
calls and incoming calls. Is there any SIP setting or dialplan setting by
which I can restrict transfer of outgoing calls.
The asterisk version
On Tue, May 29, 2012 at 3:10 AM, Danny Dias ing.diasda...@gmail.com wrote:
Hello,
For those customers with only analog lines, who ask for fax2email and
email2fax, whats the most reliable solution available and tested with
Asterisk?
Thanks
I've been real happy with using HylaFax+ and
Any hint about email2fax?
Thank you
El 29/05/2012 17:03, Warren Selby escribió:
On Tue, May 29, 2012 at 3:10 AM, Danny Dias ing.diasda...@gmail.com
mailto:ing.diasda...@gmail.com wrote:
Hello,
For those customers with only analog lines, who ask for fax2email
and email2fax, whats
That graphic doesn't cover PCI-X at all. PCI-X uses the long connector like
the 64-bit cards shown, but PCI-X is 32-bit.
Regards,
Stephen J Alexander
MPBX, LLC
http://mpbx.com
832-713-6729
On Tue, May 29, 2012 at 8:25 AM, Eliezer Croitoru elie...@ngtech.co.ilwrote:
On 29/05/2012 15:18, Kevin
- Original Message -
On Tue, May 29, 2012 at 3:10 AM, Danny Dias ing.diasda...@gmail.com
wrote:
Hello,
For those customers with only analog lines, who ask for fax2email
and
email2fax, whats the most reliable solution available and tested
with Asterisk?
Thanks
I've
On 05/29/2012 07:57 AM, Marek Cervenka wrote:
is it possible with simple CDR fully describe axfer? (axfer is asterisk
native, not phone function)
No, it is not. CDRs (Asterisk or otherwise) are only capable of directly
(simply) describing a call from party A to party B. They have no ability
In detail, I have tried both using the FreePBX distro, which uses packages -
specifically Asterisk18-voicemail-imapstorage - and using PBX In A Flash,
specifiying for Asterisk 1.8.8.0
When I use src for Asterisk version greater than 1.8.8.0, and download the
C-Client I specified earlier,
Le 29/05/2012 14:50, Matthew J. Roth a écrit :
Is that really the response that you received? 77.77.777.77 is not a
valid IP address (the 3rd octet is greater than 255), so if that's
what you're getting than your configuration is fine and the remote
end (or some proxy) is now the problem.
I'm trying to use OpenBTS with Asterisk.
I have two phones that are connecting to OpenBTS correctly, but on the
Asterisk side the phones can't call each other.
I followed this guide:
http://gnuradio.org/redmine/projects/gnuradio/wiki/OpenBTSSettingUpAsterisk
I set up two phones in sip.conf and
On Tue, May 29, 2012 at 8:03 AM, Warren Selby wcse...@selbytech.com wrote:
On Tue, May 29, 2012 at 3:10 AM, Danny Dias ing.diasda...@gmail.comwrote:
Hello,
For those customers with only analog lines, who ask for fax2email and
email2fax, whats the most reliable solution available and tested
I think you need to change:
exten = 2012,1,Macro(dialSIP,IMSI262428511722625)
exten = 2013,1,Macro(dialSIP,IMSI262422146099205)
to:
exten = 2012,1,Macro(dialGSM,IMSI262428511722625)
exten = 2013,1,Macro(dialGSM,IMSI262422146099205)
also what does sip show peers show, as opposed to sip show
Good catch.
Unfortunately, I actually did have it in there as dialGSM, I just
copied from the wrong version of the file when I copied and pasted it
here.
This is what I get from sip show peers:
Name/Username: IMSI262422146099205
Host: (Unspecified)
Dyn: D
Forceport: 0
ACL:
Port: Unmonitored
You can dial out from an unregistered SIP peer, but you can't receive a call
or call that peer.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Jacob Fenwick
Sent: Tuesday, May 29, 2012 4:32 PM
To: Asterisk
The Asterisk Development Team has announced security releases for Certified
Asterisk 1.8.11 and Asterisk 1.8 and 10. The available security releases are
released as versions 1.8.11-cert2, 1.8.12.1, and 10.4.1.
These releases are available for immediate download at
Asterisk Project Security Advisory - AST-2012-007
ProductAsterisk
SummaryRemote crash vulnerability in IAX2 channel driver.
Nature of Advisory Remote crash
Asterisk Project Security Advisory - AST-2012-008
Product Asterisk
Summary Skinny Channel Driver Remote Crash Vulnerability
Nature of Advisory Denial of Service
Hi all,
Does Hylafax and IAXmodem works with analog lines? or only with E1?
I've been checking some commercial solutions (in case Asterisk is not on
site, and the customer wants a Fax Server as standalone), i saw FaxBack and
Linkcom e-fax
But again, if Hylafax and iaxmodem works also with
On 30/05/2012, at 10:02 AM, Danny Dias wrote:
Hi all,
Does Hylafax and IAXmodem works with analog lines? or only with E1?
Hylafax can use any fax modems: available E1 or analogue, ISDN as long as it
can talk to it to send the commands
If you add asterisk and iaxmodem then hylafax can
30 matches
Mail list logo
