We are running Asterisk version 1.4.23-1, libpri-1.4.9 and
zaptel-1.4.12.1 and two Digium TE220Ps. Debugs are set to 10.
We have a T1 PRI connected to the telco. Over the last 4-5 days, we
have getting Yellow/Red alarms coming from the T1 PRI. The other two
ports in use are connected to
Dean,
what's your zaptel Zapata config_
regards
Juan.
Linux User #441131
On Mon, Feb 21, 2011 at 1:44 PM, Dean Hoover kb7...@gmail.com wrote:
We are running Asterisk version 1.4.23-1, libpri-1.4.9 and
zaptel-1.4.12.1 and two Digium TE220Ps. Debugs are set to 10.
We have a T1 PRI
Here you go:
/etc/zaptel.conf:
loadzone = us
defaultzone=us
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
span=2,1,0,esf,b8zs
bchan=25-47
dchan=48
#Added 2nd 2xT1 card
span=3,0,0,d4,ami
em=49-72
span=4,0,0,d4,ami
fxoks=73-96
---
/etc/asterisk/zapata.conf:
I don't see any problem.. but, i don't see the 2nd SPAN @ zaptel:
*yellow alarm on span 2*
regards.
Juan.
Linux User #441131
On Mon, Feb 21, 2011 at 2:11 PM, Dean Hoover kb7...@gmail.com wrote:
Here you go:
/etc/zaptel.conf:
loadzone = us
defaultzone=us
span=1,0,0,esf,b8zs
Your message was:
Here you go:
/etc/zaptel.conf:
loadzone = us
defaultzone=us
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
span=2,1,0,esf,b8zs
bchan=25-47
dchan=48
#Added 2nd 2xT1 card
span=3,0,0,d4,ami
em=49-72
span=4,0,0,d4,ami
fxoks=73-96
Ooops, my bad I Did not read the zaptel config file correctly, my apologize.
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
*span=2,1,0,esf,b8zs
bchan=25-47
dchan=48*
Juan.
Linux User #441131
On Mon, Feb 21, 2011 at 2:34 PM, Juan David Diaz juanch...@gmail.comwrote:
Your message was:
have you check the PRI crossover cable?
Juan.
Linux User #441131
On Mon, Feb 21, 2011 at 2:35 PM, Juan David Diaz juanch...@gmail.comwrote:
Ooops, my bad I Did not read the zaptel config file correctly,
my apologize.
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
*span=2,1,0,esf,b8zs
That is certainly an option, but my query was more on the side of is
it possible to trace/log the ESF frames. From what I have read, there
are signals going back and forth from a lower level than the
D-channel, and in ESF there are codes that can be sent to the other
side to reset the frame. If
This doesn't represent the 2nd span?
span=2,1,0,esf,b8zs
bchan=25-47
dchan=48
Dean
On Mon, Feb 21, 2011 at 1:18 PM, Juan David Diaz juanch...@gmail.com wrote:
I don't see any problem.. but, i don't see the 2nd SPAN @ zaptel:
yellow alarm on span 2
regards.
Juan.
Linux User #441131