Re: [beagleboard] Re: MikroBus Cape quick-start with drivers?

These are VERY helpful and a meaningful way forward. But these requires real device-drivers which i dont think we can come close to easily, but not sure though. On Fri, Jun 9, 2017 at 5:36 PM, Jason Kridner wrote: > I started to create a quick list of using drivers to

[beagleboard] Re: Does the Latest BeagleBoard-X15 Image Run Out of the Box on The Sitara am571x IDK?

Hi Robert, Here's what I'm seeing so far, what I've tried, and what's coming to mind to try to get the debian 8.8 image going on the 571x IDK: *When our 5718 IDK, is booting the bbx15-debian-8.8-lxqt-4gb-armhf-2017-06-04-4gb.img image from SD Card, the console output dies shortly after the

Re: [beagleboard] Time sync PRU with ARM

probably the simplest thing would be to provide a hardware signal to a GPIO pin that all PRUs are busy-looping on; this should provide a 5ns resolution. On Fri, Jun 9, 2017 at 1:23 PM, wrote: > > I am trying to time sync a couple of beaglebone black PRUs to each other.

RE: [beagleboard] purpose of BBB/BBGW AIN7 connection?

It was there to allow the SW to detect whethe or not the external LDO was working, something that never made it into the vault of SW features. Gerald From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of David McRell Sent: Friday, June 9, 2017 2:06 PM To:

Re: [beagleboard] purpose of BBB/BBGW AIN7 connection?

Hello William, Thank you for your reply. I didn't even notice your 'typo' until you mentioned it. :) Yeah, I understand what you are getting at. Thankfully, all AIN pin are not far under Sitara, so adding another trace doesn't look too difficult. David On Fri, Jun 9, 2017 at 2:03 PM, William

Re: [beagleboard] purpose of BBB/BBGW AIN7 connection?

Hello Gerald, Thank you for your reply. Not worried about warranty here. Just checking for unknown dependencies. David On Fri, Jun 9, 2017 at 1:50 PM, Gerald Coley wrote: > Use it for what ever you like. Just keep in mind it would void the > warranty on the board. >

Re: [beagleboard] purpose of BBB/BBGW AIN7 connection?

Sorry, AIN0-AIN6, but you got the idea already hopefully. And just to be clear, you would only need one pf the ADC lines, not all 7. On Fri, Jun 9, 2017 at 11:57 AM, William Hermans wrote: > > > On Fri, Jun 9, 2017 at 11:47 AM, David McRell >

Re: [beagleboard] purpose of BBB/BBGW AIN7 connection?

On Fri, Jun 9, 2017 at 11:47 AM, David McRell wrote: > Hello, > > What is the purpose of the resistor divider connected to AIN7? What > software is dependent on this, if any? > > Is this only a convenient connection to quickly test ADC functionality? I > find no

[beagleboard] Time sync PRU with ARM

I am trying to time sync a couple of beaglebone black PRUs to each other. I have ptp running on my boards and so I have time synced my Linux user spaces but cannot figure out a way to time sync the user space with the PRU. I want to do this so i can turn the "real time" hardware constraints

RE: [beagleboard] purpose of BBB/BBGW AIN7 connection?

Use it for what ever you like. Just keep in mind it would void the warranty on the board. Gerald From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of David McRell Sent: Friday, June 9, 2017 1:47 PM To: BeagleBoard Subject:

[beagleboard] purpose of BBB/BBGW AIN7 connection?

Hello, What is the purpose of the resistor divider connected to AIN7? What software is dependent on this, if any? Is this only a convenient connection to quickly test ADC functionality? I find no mention of AIN7 here, e2e.ti.com or on the web that convincingly indicates otherwise. I

Re: [beagleboard] Ubuntu Desktop

On Fri, Jun 9, 2017 at 12:34 PM, Vonpritchett wrote: > > Hello all, > > I am trying to install Ubuntu desktop, I have followed the instructions > found here to build the sd card(16gb) and am using the following: > Kernel: ti-linux-4.4.y -b tmp > File system: Ubuntu 16.04

[beagleboard] Ubuntu Desktop

Hello all, I am trying to install Ubuntu desktop, I have followed the instructions found here to build the sd card(16gb) and am using the following: Kernel: ti-linux-4.4.y -b tmp File system: Ubuntu 16.04 LTS

Re: [beagleboard] CMEM error

On Fri, Jun 9, 2017 at 12:51 AM, irfan chandra wrote: > Hi, > > Im useing Beaglebone Black with Debian 8.7 2017-03-19 4GB SD LXQT image > jessie, I am trying to make a video capture aplication with OpenCV > When I attempt to run the application in Beaglebone black, the following

Re: [beagleboard] Re: SD Card Image for BBBW

On Fri, Jun 9, 2017 at 12:03 PM, maxmike wrote: > > Is it possible to get a stable RCN image for the BBBW that is headless? I'd > like to avoid the burden of graphics. Yes, console or iot serve that purpose: see the snapshot section:

[beagleboard] Re: SD Card Image for BBBW

Is it possible to get a stable RCN image for the BBBW that is headless? I'd like to avoid the burden of graphics. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from

Re: [beagleboard] Re: MikroBus Cape quick-start with drivers?

I started to create a quick list of using drivers to talk to some modules on Blue. ( https://github.com/beagleboard/beaglebone-blue/wiki/One-Liner-Module-Tests). I think the same thing could be done for MikroBus Clicks pretty easy. If you think that is useful, I think I could try it for a bunch of

[beagleboard] BeagleBone Blue EduMIP Balancing Robot Assembly Video

I've just posted a video[1] showing how to assemble the BeagleBone Blue EduMIP[2] balancing robot. --Mark [1] https://youtu.be/BIMb8D5RdGA [2]

Re: [beagleboard] Re: MikroBus Cape quick-start with drivers?

In my case its not about any specific clicks, but maybe supporting a collaborative effort to contribute drivers to a well-known repository. In case you have a driver that works, you can share it. On top of that, it could be nice that all drivers were created in consistent way so the usage was

Re: [beagleboard] How to install linux-headers-3.8.13-bone30

Dear Robert, I want to install kernel headers v3.8.13-bone84. I did the following commands : wget https://raw.github.com/gkaindl/beaglebone-ubuntu-scripts/master/bb-get-rcn-kernel-source.sh chmod +x bb-get-rcn-kernel-source.sh ./bb-get-rcn-kernel-source.sh but I get this error: no kernel

[beagleboard] CMEM error

Hi, Im useing Beaglebone Black with Debian 8.7 2017-03-19 4GB SD LXQT image jessie, I am trying to make a video capture aplication with OpenCV When I attempt to run the application in Beaglebone

[beagleboard] Re: Does PINCTRL work on BB xM, kernel v. 3.11?

Hello, Vladimir. I am a student of computer engineering with some problems to multiplex my BeagleBoard xM. How did you edit your device tree? I feel like I'm at the very beginning of what I need to know to make my GPIO work, but I'd be grateful for any help your experience might bring me.

Re: [beagleboard] AM335x

then what is the solution. How can i create FAT FS on emmc using Elm Chan code. On Monday, May 29, 2017 at 10:07:01 AM UTC+5:30, lisarden wrote: > > fdisk + mkfs dont't work? > > 2017-05-27 7:33 GMT+03:00 Mukesh Kumar >: > >> I am using AM3354

[beagleboard] Re: Questions: Real Time Clock over I2C

Thanks guys, your thoughts and hints helped me a bit and I think it´s running fine now. @David: I2C was setup correctly. I can read and write all the registers manualy with the i2c tools. @Willian: Just as you thought, after I wrote to the RTC I don´t get the error when reading anymore,

[beagleboard] Re: Questions: Real Time Clock over I2C

Thanks guys, your thoughts and hinds helped me a bit and I think it´s running fine now. @David: I2C was setup correctly. I can read and write all the registers manualy with the i2c tools. @Willian: Just as you thought, after I wrote to the RTC I don´t get the error when reading anymore,