Well, I tried to replace the relay, but the original board is kind of
broken now...ooops
The espresso machine is in Austria working just fine with the new
electronic box, and I am in Sweden during the summer, so I don't see
any reason to to more repairs right now.
Thank you for the support :)
>
I had the same problem with the delay as described in the first email in
this thread. I'm pretty sure the problem is the relay inside the electronic
box, but I ended up replacing the complete box. Solved my problem. (It is a
bit tricky without the correct tools and knowledge to remove just the
Hello!
I'm teaching myself the cad software Fusion 360 and I just did this
model and printed it on my 3D printer. It works great for the inclined
portafilter that is standard on the Brewtus machines. Just download
the STL file for free and print it if you have access to a 3D printer
and need a
problem in the
future and lives in europe.
/David
On Tue, Jan 10, 2023 at 2:47 PM David Bengtsson wrote:
>
> Got my new control box. Before I do something. stupid, is this
> correct? Old box to the left 12345678 and how I think it should be to
> the right. (See attached image)
David Bengtsson wrote:
>
> Hello again,
>
> More info about my problem. Maybe someone can give me some advice. The
> problem I have is related to the water fill up of the boiler. I just
> tried to use the water tap and I got hot water, but the boiler is not
> refilling. N
that is adjusting the water level is broken or
the control box?
The fill up is working in the morning when I turn on a cold machine.
Pump is running for at least 10 seconds when I power on the machine.
How can I fix this?
TIA,
/David
On Thu, Dec 29, 2022 at 8:01 AM David Bengtsson wrote:
>
> Hello es
Hello espresso lovers!
I have an old Brewtus II and a few days ago it started to act
different. It is still working, but I am getting a bit nervous that
this is the beginning of something bad happening to the machine.
I have two symptoms:
1. When I pull the lever to pull a shot, there is a
e GFCI is tripping, then start by replacing the switch.
>
> -Original Message-
> From: brewtus@googlegroups.com On Behalf Of David
> Bengtsson
> Sent: Saturday, September 17, 2022 4:14 AM
> To: brewtus@googlegroups.com
> Subject: My residual current device is tripping
>
Hello gurus,
I'm a happy Brewtus II owner and I wonder if it is ok if I ask a
question here about my other machine? I'm lucky to have a summer house
and instead of moving the Brewtus I bought an old Gaggia TS. It has
been working great all summer, but now I have problems every tenth
shot or so.
Problem solved. The E61 kit for ECM that I linked to earlier worked just fine.
Finally a good coffee again :)
On Tue, Feb 4, 2020 at 7:42 AM David Bengtsson wrote:
>
> Thank you. I have e-mailed the german dealer to see if they know if
> the kit will work. They sell other parts for Exp
Thank you. I have e-mailed the german dealer to see if they know if
the kit will work. They sell other parts for Expobar so I think they
have the knowledge.
On Mon, Feb 3, 2020 at 4:56 PM Eric Christoffersen wrote:
>
> That kit is more complete and looks like a great price. The top and bottom
Do you think this kit will work with the Brewtus II?
https://www.avola-coffeesystems.de/e61-bruehgruppe-revisionsset-17-teilig-ecm/8079664
On Mon, Feb 3, 2020 at 9:31 AM David Bengtsson wrote:
>
> Excellent! Do you have a copy of the parts you ordered?
> Please :)
>
> Reg
Excellent! Do you have a copy of the parts you ordered?
Please :)
Regards,
/David
On Mon, Feb 3, 2020 at 6:38 AM Eric Christoffersen wrote:
>
> https://groups.google.com/forum/m/#!topic/brewtus/6d7wrpEcxk8
>
> another attempt to link my post about this issue.
>
> --
> You received this message
I think you are right and I will try to find a kit like that here in
Austria.
Regards,
/David
On Mon, Feb 3, 2020, 06:17 Richard wrote:
> I think Kevin is probably right.
>
> WLL sells a kit to replace all the parts, springs & valves in the brew
> head.
>
> --
> You received this message
Hello gurus,
Problems with my old B2. I have recently replaced the pump, the OPV
and the brass deairator that comes in the WLL kit (
https://www.wholelattelove.com/products/expobar-vibration-pump-kit ) I
live in Europe so I bought the same parts from a german dealer. The
parts look identical to
> If you bought an off the shelf AKO, it's set up for a refrigerator and the
> heater will only turn on when it gets above the set point.
You were indeed correct. The AKO thought it was a fridge and not an
espresso machine :P
Up and running now!
I think the new unit is acting a little bit
You are my hero
This must be it!
(The power on/off switch just broke but as soon as I get a new one I will
try this)
On Sun, Sep 29, 2019, 17:41 Ira wrote:
> Hello David,
>
> Sunday, September 29, 2019, 12:20:38 AM, you wrote:
>
>
>
>
>
> *> The brew boiler is heating up if I bypass the
I don't have a PID. It's the old AKO, but it's basically the same
procedure. I took pictures and installed the new unit with the same
wiring. Thank's for the tip. I will recheck everything today.
On Sun, Sep 29, 2019 at 4:38 AM Richard wrote:
>
> Do you have a PID?
>>
>> My Brewtus II suddenly
stance on the heating element.
> I'm not sure of the exact reading as it depends on your specification but you
> can compare with the working one on the steam boiler.
>
> On Sat, 28 Sep 2019 at 19:41, David Bengtsson wrote:
>>
>> Hello gurus,
>>
>> My Brewtus 2 (european
about the reset button on top of the
> brew boiler. Maybe it will work for you, it did for me.
> https://www.home-barista.com/espresso-machines/expobar-brewtus-temperature-malfunction-t25759.html
>
> Good luck!
>
> Bill
>
> On Sat, Sep 28, 2019 at 7:41 AM David Bengtsson wrote
Hello gurus,
My Brewtus 2 (european model) has been a workhorse for many years, but
I guess all good things must end :P
Problem 1: I gotr steam all over the place.I quickly realized that the
vacuum relief valve was to blame. Replaced it with a new one.
Problem 2. The machine was ok for 24 hours
Thank you. Love this group.
I'm relaying your tips & tricks to my brother. I'm pretty sure he will
figure it out now :)
Best regards,
/David
On Sun, Mar 31, 2019 at 4:51 PM Whole Latte Love Technical Support
wrote:
>
> There is a new comment in the ticket submitted by David
now.
> Here is the Jaeger:
> https://www.chriscoffee.com/Jaeger-Pressure-Stat-p/ess8700.htm
> bmc
>
> Sent from my iPhone
>
> On Apr 14, 2018, at 11:01, David Bengtsson <duel...@gmail.com> wrote:
>
> I live in Europe, so I will order from another site.
> Is this the on
ier as well, but both are pretty straight forward.
> b
>
> Sent from my iPhone
>
>> On Apr 14, 2018, at 10:45, David Bengtsson <duel...@gmail.com> wrote:
>>
>> Thank you. I will order a new pressurestat and make coffee with my
>> mokka pot until the problem
a n00b when it comes to screwdrivers :)
Best Regards,
/David Bengtsson
--
You received this message because you are subscribed to the Google Groups
"Brewtus" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to brewtus+unsubscr...@googlegroups.co
I'm not a descaler expert, but I have to say the product Durgol (in
the small bottles) is amazing. I also live in an area with hard water.
I use two small bottles each time and the Brutus it is like new after
a descaling session :)
26 matches
Mail list logo
