Re: Stus-List Diesel Filter

I run a 2 micron in my primary Racor as Josh mentioned and on the advice of the teacher of a 'small marine diesel engine class' I took. I never wait for the engine to stall before changing and I do not have a guage. What I do have and maintain is a clean tank and use biobor religiously. I change

Re: Stus-List Force 10 heater removal

Josh, Many Thanks for your detailed response! Much appreciated. I am definitely gonna put the Netflix series on hold while I figure out how this all works.  Ciao ! John Conklin S/V Halcyon From: Josh Muckley via CnC-List Sent: Saturday, May 23, 2020 2:44 PM To:

Re: Stus-List Source for long stainless/brass screws

McFeely's.  6" Stainless Steel, square drive. Hope you are sitting down when you see the price but they are top quality. Neil Schiller 1983 C 35-3, #028, "Grace" Whitehall, Michigan WLYC Got out for our shake down with our new UK Main and Jib today! On 5/22/2020 9:14 PM, David Morris via

Re: Stus-List Diesel Filter

David, I wasn’t on board, but I think one was a precaution and the other because of a stall-out. All the best, Edd ———- Edd M. Schillay Captain of the “Starship Enterprise” C 37+ | Sail No.: NCC-1701-B Venice Yacht Club | Venice Island, FL www.StarshipSailing.com

Re: Stus-List Diesel Filter

I have a vacuum gauge on my filter. It makes it pretty obvious when it is getting clogged. They don't have to be on the filter, you can add a hose and put one where you can see it in the cockpit. Joe Coquina ___ Thanks everyone for supporting

Re: Stus-List Diesel Filter

Hi Edd- How did you know you needed to change the filter twice on the trip down? Were there symptoms or just being cautious? Dave S/V Aries 1990 C 34+ New London, CT > On May 23, 2020, at 4:00 PM, Edd Schillay via CnC-List > wrote: > > Bo, > > Much will depend on how much you use your

Re: Stus-List Diesel Filter

Bo, Much will depend on how much you use your engine, how clean your tank is, and the quality of fuel you are using. When the Enterprise came down from New York, she was practically motoring the entire time, adding many hours of engine use in three weeks. For that trip, the filters were

Re: Stus-List Diesel Filter

I rarely change mine. I find that I'm more likely to cause a problem by messing with them than leaving them alone. The engine mounted filter is 2 micron IIRC and the engine can draw up to ~ 1 gallon per hour. The upstream Racor can be 2,10,or 30 micron and is rated at 15 gallon per hour. Many

Re: Stus-List Force 10 heater removal

Fiberglass repair videos are provided by Jamestown Distributors and/or Boatworks Today. -In general you'll want to epoxy a backer on the bottom of the deck to hold the filler in place. A piece of G10 might be a good choice. 1/8th inch would probably be thick enough but thicker would be fine

Re: Stus-List Favorite deck cleaner/recipe?

I am with Josh on this one. I find that the sun does a great job of keeping my decks white. I keep some Scrubbing Bubbles on board, bur rarely use it. Given time, the sun will bleach most stains, shoe marks, etc. I use the cleaner for stuff that accumulates in the spring from trees and in

Re: Stus-List speedometer - C 35 Mk2

Dielectric grease is made specifically for electrical use. Any auto parts store has it for about $5. Joe Coquina On 5/23/2020 12:54 PM, General Gao via CnC-List wrote: that is what I am thinking. Would vaseline work? Thank you, Bo On Mon, May 18, 2020 at 3:49 PM Della Barba, Joe via

Re: Stus-List speedometer - C 35 Mk2

I use Vaseline to keep the barnacles and other sea life from sticking to the impeller if I forget to pul it out when we tie up after sailing. Sincerely, Neil Neil Andersen 20691 Jamieson Rd, Rock Hall, MD 21661 neil.eric.ander...@gmail.com

Stus-List Diesel Filter

Hi everyone, Just wondering, how often do you have to change diesel filters? or how do you tell it is time to change? Thank you, Bo ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If

Re: Stus-List speedometer - C 35 Mk2

that is what I am thinking. Would vaseline work? Thank you, Bo On Mon, May 18, 2020 at 3:49 PM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > Put some dielectric grease on the connections ;) > > > > *Joe Della Barba Coquina C 35 MK I* > > *www.dellabarba.com

Re: Stus-List Force 10 heater removal

I will take it! John McCrea Talisman C 36 Mystic, CT Sent > On May 23, 2020, at 11:45 AM, John Conklin wrote: > > Ok I had a chance to visit the boat during 5 straight days of torrential > rain Here in in Oriental. > Found a pretty good leak at exhaust pipe on the force 10 water running

Re: Stus-List Force 10 heater removal

I would be interested in it. Doug Mountjoysv Rebecca Leah C Landfall 39Port Orchard yacht club Original message From: John Conklin via CnC-List Date: 5/23/20 08:45 (GMT-08:00) To: cnc-list@cnc-list.com Cc: John Conklin Subject: Stus-List Force 10 heater removal Ok I had a

Re: Stus-List Butyl tape

Ordered thanks !! John Conklin S/V Halcyon S/V Heartbeat www.flirtingwithfire.com On May 23, 2020, at 11:14 AM, Dave Godwin via CnC-List wrote:  John, links there. Second one, not first..,, Sent from my iPhone On May 23, 2020, at 11:00 AM, John Conklin via CnC-List wrote:  Found it

Stus-List Force 10 heater removal

Ok I had a chance to visit the boat during 5 straight days of torrential rain Here in in Oriental. Found a pretty good leak at exhaust pipe on the force 10 water running along coach roof to circular block creating a water trap. Realized it was not only leaking dripping off heater and down

Re: Stus-List Butyl tape

John, links there. Second one, not first..,, Sent from my iPhone > On May 23, 2020, at 11:00 AM, John Conklin via CnC-List > wrote: > >  Found it bought it > Replacing few barients with self tailing so that’s first application > Good? > > John Conklin > S/V Halcyon > S/V Heartbeat >

Re: Stus-List Butyl tape

Found it bought it Replacing few barients with self tailing so that’s first application Good? John Conklin S/V Halcyon S/V Heartbeat www.flirtingwithfire.com On May 23, 2020, at 10:26 AM, Josh Muckley via CnC-List wrote:  https://shop.marinehowto.com/t/bed-it-tape On Sat, May 23, 2020,

Re: Stus-List Source for long stainless/brass screws

Try Pacific Fasteners in Toronto. https://www.pacfast.com/ Mike Michael Brown Windburn C 30-1 From: To: Sent: 5/22/2020 9:14 PM Subject: Stus-List Source for long stainless/brass screws I’m having difficulty finding a supplier of the 6” screws - preferably

Re: Stus-List Butyl tape

https://shop.marinehowto.com/t/bed-it-tape On Sat, May 23, 2020, 10:23 John Conklin via CnC-List wrote: > Don’t see the bed it on Amazon > Few other Colormetrics -GSSI > Link please. > > John Conklin > S/V Halcyon > S/V Heartbeat > www.flirtingwithfire.com > > > On May 22, 2020, at 9:24 AM,

Re: Stus-List Butyl tape

Don’t see the bed it on Amazon Few other Colormetrics -GSSI Link please. John Conklin S/V Halcyon S/V Heartbeat www.flirtingwithfire.com On May 22, 2020, at 9:24 AM, Dave Godwin via CnC-List wrote:  This is for Bailey White’s question about removing excess butyl under the hardware. I use

Re: Stus-List CnC-List Digest, Vol 172, Issue 80

ay > > > > > -- next part -- > An HTML attachment was scrubbed... > URL: < > http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20200522/3277f646/attachment-0001.html > > > > ------ > > Message

Re: Stus-List Fwd: Source for long stainless/brass screws

Jamestown distributers is a really good source for screws. thanks, Danny From: Mike Taylor via CnC-List Sent: Saturday, May 23, 2020, 7:09 AMTo: cnc-list@cnc-list.comCc: Mike TaylorSubject: Stus-List Fwd: Source for long stainless/brass screwsDid you try Brafasco on TerryFox.MikeBegin

Re: Stus-List securing cables in mast

Thanks to everyone who contributed to the topic of securing cables in the mast. I just thought I would follow up and report back the result. In the end, I did end up going with conduit. I installed two runs of 1-1/4" schedule 40 outdoor PVC conduit (gray). One up the aft of the mast (slightly

Stus-List Fwd: Source for long stainless/brass screws

Did you try Brafasco on TerryFox. Mike Begin forwarded message: > From: David Morris via CnC-List > Date: May 22, 2020 at 9:14:51 PM EDT > To: cnc-list@cnc-list.com > Cc: djmor...@djma-ltd.com > Subject: Stus-List Source for long stainless/brass screws > Reply-To: cnc-list@cnc-list.com > >