], the latest images support atBen out of box
and if your router have a usb host. you can try to make the atUSB work under
router
then it because a wireless device with Internet access
xiangfu
[1]http://en.qi-hardware.com/wiki/Ben_WPAN
___
Openmoko
Vaudano Luca wrote:
Hi!
You got an error because this is a bazaar, not a svn repository, repository.
By the way, all the instructions are here:
http://www.vaudano.eu/wiki/en/estardictInstallation#Development_in_Ubuntu_Karmic
I tried eStarDict with chinese charset and it works fine.
If you
Hi Vaudano Luca
we also work with the StarDict. I try to checkout the eStarDict source code
but it's give me those error:
$ svn co http://code.launchpad.net/estardict/trunk
svn: Repository moved temporarily to
'https://code.launchpad.net/estardict/trunk'; please relocate
$ svn co
Hi
I found the source code :-)
http://www.vaudano.eu/projects/estardict/estardict-0.1_r54.tar.gz
Vaudano Luca wrote:
Hi guys,
I just release the first version of eStarDict, a offline dictionaries
reader, for SHR, the babiloo-efl successor.
http://www.vaudano.eu/wiki/en/estardict
The
Xiangfu
Best Regards
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Xiangfu
Best Regards
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Hi Daniel
i think you should google it first .
take a look at :
http://git.openmoko.org/
http://wiki.openmoko.org
http://wiki.openmoko.org/wiki/Getting_Started_with_your_Neo_FreeRunner
On Feb 17, 2009, at 9:23 PM, Daniel.Li wrote:
Dear All,
I have just got my FreeRunner.
And I need source
Hi
how about this:
fix boxes each covered by another
On Feb 17, 2009, at 6:18 AM, The Digital Pioneer wrote:
Hi. This is completely off-topic, and I apologize, but I have a
graphic with chinese (simplified) that I need translated to english,
and I'm hoping someone on this list can help
Cool.
On Feb 14, 2009, at 4:51 PM, Olof Sjobergh wrote:
Hi,
This is to announce the first release of Enscribi, a new handwriting
recognition input method I've been working on. The main focus, and the
only thing supported for now, is writing Japanese and Chinese
characters (and numbers, but
Hi
On Feb 15, 2009, at 12:21 AM, Olof Sjobergh wrote:
On Sat, Feb 14, 2009 at 4:54 PM, HouYu Li kara...@gmail.com wrote:
Hi, It's a nice start...
XiangFu! Have you tried it? I just installed these packages on FSO
latest
i just install Enscribi
then:
r...@om-gta02:~#enscribi
Enscribi
Hi
Tilman Baumann wrote:
Hi,
I have just flashed Qi and have two questions.
First, http://wiki.openmoko.org/wiki/Qi clearly states that the boot
menu via power+aux will still work.
I was sceptical about how that should work since gta01 has no NOR flash.
But I trusted the source.
Hi
Fox Mulder wrote:
Today i changed from u-boot to qi from [1] for my GTA02. I added /boot
to my rootfs and copied the kernel as uImage-GTA02.bin in it.
For my first try i added the append-GTA02 with console=tty0 loglevel=8
to see if it works.
After this worked very good to boot debian from
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Nicolas Linkert wrote:
Hi,
I might be a bit retarded (one never knows), but for the life of it I
cannot ssh into the FR:
Host IP: 192.168.0.101
DNS: 192.168.0.100
this is you eth0 ip address.
On the host I do as root:
ifconfig usb0
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi
Shaz wrote:
Hi,
I am compiling a small package which does not have any autoconf so has
only a simple recursive Makefile. When I try to build it with the OM
toolchain it gives me the following error message:
make[1]:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
may be the KERNEL CRC check ,
you can try a new kernel.
http://buildhost.openmoko.org/daily/freerunner/200808/
Fredrik Wendt wrote:
Hi.
Everytime I boot (ever since I got my FR) I've seen a bunch (6) of
CRCFAIL 0x1a3f messages. What are they?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Sorry, ignore my last e-mail.
try to read this:
http://lists.openmoko.org/nabble.html#nabble-td532868
Fredrik Wendt wrote:
Hi.
Everytime I boot (ever since I got my FR) I've seen a bunch (6) of
CRCFAIL 0x1a3f messages. What are they? Should I
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
if the Freerunner have indian fonts file i think it is can display Hindi
text.
On Thu, 21 Aug 2008 13:57:43 +0530
sparky mat [EMAIL PROTECTED] wrote:
I managed to get the whole of GNOME running on Freerunner (using the Debian
installer -
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
8GB :-)
Lothar Behrens wrote:
Hi,
I have found this product and like to ask if it is compatible with
FreeRunner.
http://www.shoxx.com/catalog/product_info.php/products_id/7919?sID=2e84a091a4cd9fb0bd4cd79aa583aa58
Is it ?
Thanks
it's cool
Sebastian Ohl wrote:
Hi everyone,
after having installed the debian distro. i noticed that there is no
right mouse button. so many standard applications aren't usable
because they depend on it(i tried to add an applet to my xfce panel..).
so i created a patch to the xorg tslib
Florian Hackenberger wrote:
Hi!
For a robotics project, I'd like to interface my Freerunner with a
custom board using the serial interface exposed on the JTAG connector.
Could someone please point me to the specification of the required
cable? Has someone a link for purchasing such a
Thomas Bertani wrote:
2008/8/15 arne anka [EMAIL PROTECTED]
question is: is which version should I install on the sd card? The
what you like best.
why?? oO THe sd is faster then the flash ?
i think arne anka means
which version install on the sd card is up to you :-)
official 2008.8
Lynn Nguyen wrote:
I believe so. I used the openocd.cfg that is given on the wiki. I've even
followed the steps here:
http://svn.openmoko.org/developers/werner/notes/openocd
which seem to be legit. The step I get stuck on is running openocd. I think
maybe there is something wrong with the
yangm wrote:
If they can setup sales center or reseller in Hongkong, the people
china-mainland will easyer to buy it,
To setup sales center in Hongkong could void the severe management of
official of china mainland.
that's cool
2008/7/27 Joerg Reisenweber [EMAIL PROTECTED]
I seem
there is something wrong -U option.
be careful use this option.
Gianluigi wrote:
Alle 02:50, lunedì 21 luglio 2008, Kevin Squire ha scritto:
At least one other person (you?) has indicated a similar problem at
http://wiki.openmoko.org/wiki/Pre-Flash_Backup. Any ideas, anyone?
Thanks,
Hi
did you use this :
dfu-util --device 0x1457:0x5119 -a kernel -R -D ./kernerl.bin
if you don't special the --device
make sure there only FR connect you PC with USB.
hope this help you
joseph schlesinger wrote:
I haven't been able to flash my FR after booting either into NAND or
NOR. I
to use the dfu-util
first of all you should at DFU-MODE
press AUX then press POWER, hold this two button for a few second.
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
need time. :-)
?? wrote:
The factory is at SuZhou, but we need but the product from TaiPei and pay
$88 to UPS.
$88 is so expensive for us.
If you can setup a sale-center or reseller in china mainland, more linux
fans will become openmoko's fans.
Yang Ming
may be can use SMS control the remote NEO like send
#neo_command shutdown -h now
then the neo poweroff : )
Francesco Cat wrote:
There is also a nice feature that could be used with SMS: imagine that
the SMS is automatically shortened (eg by abbreviating words and stuff
like that) than it's
very cool : )
Robert Schuster wrote:
Hi,
Mickey writes: Openmoko is selling hardware products.
Heck, why must OpenMoko only sell mobile phones?
I like Linux-based devices that are free as in freedom. So I would
likely also buy a device from OpenMoko if it is a wireless router, a
SOHO NAS
maybe a lot of people don't understand the OPENMOKO(personal think).
they just think it's a free mobile, a open source project like others.
i will Translate this mail to Chinese. let them know what the NEO be.
(i can't write article like this : )
Wolfgang talked to me about john meada.
there are another two question:
1. where is the code of read SIM card contacts. i want it can read Chinese.
there is some different between English and Chinese store in SIM card.
2. Is there Auto Text in openmoko. like adn it can auto change to and.
is have this function, i can simply input
I would like to set up a local group,
Do some work for NEO1973.
if the Mail list there are Chinese
please e-mail to me or to the WIKI NEO on the registration CHINA GROUP
OpenMoko Local Groups:
Chinahttp://wiki.openmoko.org/wiki/OpenMoko_Local_Groups:_China
--
my Blog :
you can see my bolg http://blog.chinaunix.net/u/13385/ , it may be help
you
--
my Blog : http://blog.chinaunix.net/u/13385/
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
sorry
last mail has the wrong title
this is true
--
my Blog : http://blog.chinaunix.net/u/13385/
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
hi
i flash my NEO1973 with the new kernel
when i connect to the Windows XP
it 's not work
i can see the Device in the computer but it is not work
but it's work with Ubuntu.
i don't why
and how can i deal this
in the work time i must use the Windows So..
--
my Blog :
Xiangfu: do you see the Neo showing up in Network Connections or not?
Perhaps you need to uninstall the driver first and then plug the Neo
back in and let WinXP reinstall it and at the same time update some of
the many bits of secret Windows-data it uses to track devices?
-Nick
Thinks
i
I use Neo1973 in China
I can transcode from base64 to Chinese
in this way i can read the chinese SMS
i know the sms save at /home/root/Document/application/Qmail/mail In Qtopia
but i don't know where the SMS mesage save In the OpenMoko
--
my Blog : http://blog.chinaunix.net/u/13385/
37 matches
Mail list logo