Package: emacs24-common
Version: 24.5+1-6
Severity: normal
Tags: upstream
One of the nice features of org-mode is the ability to write LaTeX
in-line. When there is a lot of LaTeX in a document, the preview
enabled with org-preview-latex-fragment comes in handy.
Unfortunately, the preview is
Package: systemd
Version: 229-6
Severity: important
After gummiboot has been integrated into systemd as systemd-boot, I
decided to give this new feature a try and installed a new machine
with systemd, not installing gummiboot or any other boot loader. The
machine is capable of booting an UEFI
Hello,
On 02/05/16 11:02, Yves-Alexis Perez wrote:
> As far as I know it's not “some graphics hardware”. Xorg explicitely sets DPI
> to 96x96.
I have a machine at home where the resolution is set to the correct
value (ie not 96x96) without any further configuration (ie no xorg.conf
etc). But I
Package: xfce4-settings
Version: 4.12.0-2
Severity: minor
Tags: upstream
XFCE comes with a configuration setting for adjusting the DPI of a
monitor. However, this setting only has effects on Gtk, X itself is
not affected. You can easily check this by selecting a non-default DPI
setting in the
Package: network-manager
Version: 1.0.6-1
Severity: normal
Dear Maintainer,
I have just upgraded network-manager from 1.0.6 to 1.0.10 just to
determine that my OpenVPN connection stopped working. Downgrading to
1.0.6 fixes the connection again.
In my configuration, the central OpenVPN server
Package: zim
Version: 0.65-2
Severity: normal
Dear Maintainer,
I recently upgraded zim from version 0.63 to 0.65. Unfortunately, on
one of my machines zim showed weird behaviour: It could no longer
display the calendar widget of the Journal plugin, and switching to
the page for the current day
Package: mupdf
Version: 1.5-1
Followup-For: Bug #769282
Attached patch fixes the problem.
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'oldstable-updates'), (500, 'unstable'),
(500, 'stable'), (1, 'experimental')
Architecture:
I have just tried running smartctl with the updated binutils version
2.24.90.20141201-1, however the bug is still there.
$ smartctl -a /dev/sda
Inconsistency detected by ld.so: dl-version.c: 224:
_dl_check_map_versions: Assertion `needed != ((void *)0)' failed!
br,
Thomas
--
To
Package: mupdf
Version: 1.5-1+b2
Severity: wishlist
Tags: upstream
mupdf allows only zoom sizes between 0.25 and 4 (x11/pdfapp.h line 13ff)
#define MINRES 18
#define MAXRES 288
These settings are too conservative, as LaTeX beamer slides cannot be
presented full-screen on large monitors.
Package: geeqie
Version: 1:1.2-1
Severity: minor
Tags: upstream
Hello,
in geeqie version 1.2 the Help/About dialog box says Geequie 1.1. This can
result in confusion when checking patches, reporting bugs etc.
br,
Thomas
-- System Information:
Debian Release: jessie/sid
APT prefers testing
Package: ruby-jekyll-watch
Version: 1.0.0-1
Severity: minor
Jekyll is crashing under the following conditions:
1. ruby-jekyll-watch is installed
2. ruby-rb-inotify is not installed
3. The user runs jekyll build -w or jekyll serve -w without the
--force_polling command line option.
The error
Package: mupdf-tools
Version: 1.3-2
Severity: minor
The man page for mudraw does not document the -F command line switch. However,
it would be really nice if one could read about the SVG export capabilities of
mupdf.
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT
Package: jekyll
Version: 1.5.1-1
Severity: grave
Justification: renders package unusable
Jekyll always aborts with the following error message:
/usr/lib/ruby/2.0.0/rubygems/core_ext/kernel_require.rb:55:in `require': cannot
load such file -- colored (LoadError)
from
Package: mupdf
Version: 1.3-1
Severity: wishlist
Tags: upstream
I really like mupdf very much, as it is lightweight and does everything
what I want a PDF viewer to do. However, I cannot accustom myself to
the behaviour of the mouse: Panning switches pages, using the scroll
wheel does not. Given
Hello Tanguy,
On 11/24/2013 06:48 PM, Tanguy Ortolo wrote:
First of all, sorry for the very high delay of response, I have taken
over the maintenance of the package gajim and this bug is anterior to that.
thank you for coming back to me.
Thomas Prokosch, 2012-02-06 18:33+0100:
In case
Package: libpaper1
Version: 1.1.24+nmu2
Severity: normal
libpaper1 does not configure properly on newly set up systems: I am using
multistrap to build an ARM image from scratch on i386 hardware. However,
during unpacking on the real ARM hardware with dpkg --configure -a, libpaper1
fails to unpack
Package: gajim
Version: 0.14.4-2
Severity: important
In case gajim cannot create a subdirectory share within directory $HOME/.local,
it fails to start with the following error message:
Traceback (most recent call last):
File gajim.py, line 145, in module
import common.configpaths
File
Package: linux-2.6
Version: 2.6.38-1
Severity: important
Since the big XFS refacturing, kernels tend to hang on one particular machine.
It is not a hardware problem, since the very same machine works flawlessly with
the very same configuration, by just using an older (=2.6.26) kernel.
Kernel bug number is 32342
https://bugzilla.kernel.org/show_bug.cgi?id=32342
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Package: vnstat
Severity: normal
Tags: upstream
There is an unexpected difference between the vnstat and the vnstatd binaries:
In a low diskspace scenario, the CheckDiskSpace option set to 0 comes in handy.
Setting this option to 0 updates the database file even if the remaining
diskspace is
Package: zim
Version: 0.48-1
Severity: normal
When printing to the browser, zim embeds a snippet of CSS for proper
formatting. While doing this zim seems to miss the attributes for an emphasis
tag.
In my style.conf file I do have the following entry:
[Tag emphasis]
style=italic
On Monday 28 February 2011 12:11 AM, Jaap Karssenberg wrote:
I'm sorry but zim does no translation at all from properties in
style.conf to CSS. The config file is for the style of the user
interface, the CSS is hardcoded in the HTML template used.
Oh, I see. I am glad I used the same spelling
Package: jabref
Version: 2.6+ds-4
Severity: normal
Starting with this version, Jabref always opens in a maximized state, despite
the following entry in the config file:
entry key=windowMaximised value=false/
This new behaviour is pretty annoying on a large screen.
-- System Information:
On Saturday 26 February 2011 05:36 PM, gregor herrmann wrote:
On Sat, 26 Feb 2011 08:30:47 -0800, tony mancill wrote:
Starting with this version, Jabref always opens in a maximized state, despite
the following entry in the config file:
entry key=windowMaximised value=false/
This new
Package: xfce4-battery-plugin
Version: 0.5.1-1+b1
Severity: normal
xfce4-battery-plugin has a problem with recent (2.6.36) kernels: It does no
longer show time estimates of the remaining run time/charging time. The
charging state (given in percent) is fine, however.
IMHO would also be
Package: acpitool
Version: 0.5-5
Severity: grave
Justification: renders package unusable
acpitools segfaults on linux-image-2.6.30 on i386 when called with -B option.
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500,
Package: mercurial
Version: 1.3-2
Severity: normal
hgrc manpage states:
A configuration file consists of sections, led by a [section] header
and followed by name: value entries; name=value is also accepted.
This means that the primary way of specifying config file entries is using
colons.
Package: xfwm4
Version: 4.6.1-1
Severity: normal
xfce 4.6 does not remember the names of the workspaces any
more, except for the first workspace. It also does not help to
make the config file readonly, since xfce resets the permission
of the file on next restart (how weird is that??).
The
Package: gxine
Version: 0.5.903-4
Severity: normal
gxine changes the desktop file during installation (updates MIME type).
Therefore, the checksum provided by debsums becomes invalid:
debsums: checksum mismatch gxine file /var/lib/xine/gxine.desktop
-- System Information:
Debian Release:
Package: gstreamer0.10-plugins-good
Version: 0.10.8-4
Severity: normal
As the title suggests, having an extra package for the plugin dependant on
gconf2 would be a good idea. Neither gstr-pl-base nor gstr-pl-bad are
dependent upon gconf.
-- System Information:
Debian Release: 5.0
APT prefers
Package: inkscape
Severity: wishlist
An inkscape-nognome package (without the dependencies on libgconf2 and
libgnomevfs2) would be very helpful. Not everybody wants the GConf
bloat, and Inkscape works fine without it.
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT
Package: gxine
Version: 0.5.903-2
Severity: normal
When explicitely disabling the screensaver through the
preference window within xine, it starts nevertheless when
GNOME is not installed (in case of XFCE). The error message
tells why:
can't poke gnome-screensaver:
Failed to execute child
Package: libxrandr2
Version: 2:1.2.1-1
Severity: normal
I do have a Sony laptop, and I have mapped the function keys controlling
the brightness of the display to a script setting values in
/sys/class/backlight/sony. This works fine both in the console and
within X up to the point where
Package: xscreensaver
Version: 4.24-5
Severity: grave
Tags: security
Justification: user security hole
I do have set up xscreensaver so that it locks the screen after a
certain timeout. This is a handy security feature which is the main
reason for using the screensaver. However today the screen
Package: ink
Version: 0.3.2~rc3-1
Severity: grave
Justification: renders package unusable
On my system there is no /dev/usb directory - the USB device files are
found in another location. Ink does not provide the possiblity to
support a filename as a parameter, so this program is unusable in its
Package: hibernate
Version: 1.93-1
Severity: normal
Tags: patch
My laptop boots off a separate, XFS formatted /boot partition. I do not
let hibernate rewrite GRUB's configuration files (at least not now) and
so I was able to spot an incorrect short cicuit evaluation which leads
to the following
Package: yaird
Version: 0.0.12-17
Severity: important
I am using the Suspend2 patches together with LUKS-encrypted root and
swap. Yaird writes the init file in a way so that the root disk is
opened first, then the resume happens, and after resuming the swap
partition is LUKS-opened. It is clear
Package: wnpp
Severity: wishlist
* Package name: truetypeviewer
Version : 20030318
Upstream Author : Rogier van Dalen [EMAIL PROTECTED]
* URL : http://home.kabelfoon.nl/~slam/fonts/truetypeviewer.html
* License : GPL
Programming Lang: C++
Description :
Package: xfce4-battery-plugin
Version: 0.4.0-1
Followup-For: Bug #291120
I can confirm that when running on AC the plugin still displays the time
which would be left if I was not running on AC.
For example when the battery is 40% full, the battery panel plugin
displays 40 minutes, however
Package: zim
Version: 0.15-1
Severity: normal
There is a new version available (v0.16) and I'd really love to try it...
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1,
'experimental')
Package: yaird
Version: 0.0.12-16
Severity: important
Tags: patch
The output of mdadm --detail has changed in the new version 2.5.2, and
yaird 0.0.12 has problems with parsing the new output format. To be more
precise, mdadm offers a new key/value pair with the key Name in its
output.
The
Package: zile
Version: 2.2.13-1
Severity: wishlist
For editing text files with longer paragraphs I would appreciate
something like a buffer variable truncate-lines or a function
toggle-truncate-lines which are present in GNU Emacs. This feature
would be especially useful when writing prose text
Package: pengupop
Version: 2.0.2-1
Severity: important
After some joyful time playing the game, pengupop crashes with the
following error:
*** glibc detected *** free(): invalid pointer: 0x087afd08 ***
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy:
Package: xfce4
Version: 4.3.90.1-2
Severity: normal
In my opinion it is a bit harsh for xfce4 to depend on thunar since the
XFCE desktop runs fine without it.
Either xfce4 should depend on all orage, xfce4-terminal, xfmedia and
thunar, or it should recommend them. Having a mix does not feel
Package: cupsys-driver-gutenprint
Followup-For: Bug #329657
I have tried the package from unstable (version 4.3.99+cvs20060521-2)
but there is no improvement as far as the color density on this
particular model is concerned.
-- System Information:
Debian Release: testing/unstable
APT prefers
Package: zim
Version: 0.14-1
Severity: normal
There is a new version available which offers some exciting new features
(v0.15).
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1,
'experimental')
Package: le
Version: 1.9.1-4.1
Severity: normal
At the time of writing this bug report, version 1.13.2 is already
available from the upstream server
ftp://ftp.yars.free.net/pub/source/le/
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990,
Package: le
Version: 1.9.1-4.1
Followup-For: Bug #369383
The last message was not readable due to an error in the bug report -
the file contained an improperly escaped character, sorry. The bug
report should read:
le should integrate itself into the alternatives system, in particular
le should
Package: gdmap
Version: 0.7.5-1
Severity: important
gdmap does not support large files which are bigger than 2G. I had a look at
the source code which uses large ints for the size information. The problem
simply is that LFS support is not enabled in the build system, ie. the lstat
call is mapped
Package: zim
Version: 0.13-1
Severity: normal
In my opinion the dependencies of the zim package are too strong.
Particularly it is not necessary to depend on the packages
libgtk2-trayicon-perl, libgtk2-spell-perl
Zim v0.13 runs fine without these packages, so instead of depending on these
Package: sleepd
Version: 1.3.0
Severity: important
After upgrading from 1.2.16 to 1.3.0 my laptop does no longer sleep. I have
no idea why, I am using the --ac-unused option which does not help. Calling
apm -s manually works as expected. The syslog and daemon.log do not indicate
different
Package: wget
Version: 1.10.2-1
Severity: normal
When using wget in non-verbose mode, it prints out each file transferred:
$ wget -nv someurl
14:35:19 URL:someurl [2838/2838] - localfilename [1]
When using spider mode I expect to get a similar output, because I want to
see which files are still
Package: ijsgutenprint
Severity: normal
The package description says:
This package contains the ijsgutenprint binary which provides
Ghostscript with a Gutenprint driver, including all printers
supported by Gutenprint.
I just found this package and have asked myself what it does.
I do have
Package: psi
Version: 0.9.3-2
Followup-For: Bug #329263
I can confirm that this bug did not occur with version 0.9.3-1, so I am
quite confident that it has been introduced by one of the Debian patches.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy:
Package: mercurial
Version: 0.7-4
Severity: minor
Mercurial always uses DST if current time zone specifies one. Please
apply the patch from the Mercurial mailing list with the patch id
d6159d08ad1633b891b89de611cabddc83fd9625
The error is very annoying, I would be glad if it could be corrected by
Package: mercurial
Version: 0.7-4
Followup-For: Bug #336646
In the bug report I copied the wrong id, sorry for that. The original bug
report points to the manifest - the changeset id for the timezone patch is
4d38b85e60aa03be29c0e3ba30349fd405c80470
It is already available from upstream
Package: kernel-image-2.6.8-2-386
Severity: normal
I am running the stable kernel on a production server, leading to the
following message during this night's backup of an XFS partition via
xfsdump:
Oct 7 04:56:18 rt2 kernel: pagebuf_get: failed to lookup pages
Oct 7 04:56:18 rt2 last
Package: rkhunter
Severity: grave
Tags: security
Justification: user security hole
The rkhunter daily cron script version 1.2.7-13 uses the
following command to create a file in the /tmp directory:
$RKHUNTER --cronjob --report-warnings-only /tmp/$$
If I am not mistaken this command poses a
Package: rkhunter
Severity: wishlist
Depending on wget is bad for security. As it is well known security related
bugs are often exploited by providing shell code when input sanitizing is
missing. That is why I do not install wget or curl on systems which need to
be well protected.
This is the
Package: rkhunter
Severity: normal
Rkhunter sends an email on the daily invocation even if there are no
warnings or errors. The sent mail is empty which in turn makes /usr/bin/mail
complain about the null message body. As a result there are two messages,
one confusing, when there should be none.
Package: guessnet
Version: 0.36-1
Followup-For: Bug #318273
What is the status of this bug? I experience it too, it is rather annoying
because one always has to bring up the network interface by hand
(ifup eth0=somesetting) which kind of defeats the purpose of guessnet.
What can I do to help
Package: cupsys-driver-gutenprint
Severity: normal
I own a Canon BJC-250 and never cared to use the printer under Linux because
the printout quality is too bad. Now I have no other choice and therefore
filing this bug report. My print server runs Gutenprint 5.0rc1 but this
bugreport also applies
Package: qiv
Version: 2.0-4
Followup-For: Bug #326849
I wanted to add that this bug happens also with my installation, but only
after upgrading from XFree to Xorg. The error message and the behaviour is
completely the same.
I don't know whether it is of any importance but I am using X in
Package: le
Version: 1.9.1-4.1
Severity: normal
I am not quite sure whether this bug has its origin in le or in libncurses5
but since le is the only curses bases program with with I experience this
problem I file the bug report here.
In case the console is in framebuffer mode le erases its
Package: darcs
Version: 1.0.3-1
Severity: normal
When piping output through a pager darcs calls the less binary directly
instead of relying on the pager symlink. This is confusing when no less
binary is installed (yes, there are machines) or the user prefers another
pager over less (such as me).
Package: wnpp
Severity: wishlist
* Package name: courier-pythonfilter
Version : 0.8
Upstream Author : Gordon Messner [EMAIL PROTECTED]
* URL :
http://phantom.dragonsdawn.net/~gordon/courier-patches/courier-pythonfilter/
* License : GPL
Description :
Package: courier-mta
Severity: wishlist
Hello,
After searching for a greylisting solution for Courier I found
http://phantom.dragonsdawn.net/~gordon/courier-patches/courier-pythonfilter/
on the net. I would like to see this in Debian. Before I go and file an RFP
I would like to know whether a
Package: at
Version: 3.1.8-11
Severity: important
When root installs an at command the command is run but the results are not
mailed. User IDs other than 0 work as expected.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990, 'testing'), (500,
Package: kernel-image-2.6.8-2-386
Version: 2.6.8-16
Followup-For: Bug #311357
Dan,
your problems seems to me to be a different one. I only experienced the network
card problems after upgrading from 2.6.8-13 to 2.6.8-16, not with earlier
kernels. It also happens with only one Via Rhine card
Package: kernel-image-2.6.8-2-k7
Followup-For: Bug #311357
I can confirm this problem. Please revert the latest VIA Rhine patches
introduced between 2.6.8-15 and 2.6.8-16. The latest kernel is completely
unusable. There is a big difference between a few not properly handled IRQs
and a machine not
Package: torsmo
Version: 0.18-5
Severity: important
I am using torsmo in a window, double-buffered with a Xft font. After some
time the text goes away leaving only the bars and horizontal lines on the
screen. This bug makes torsmo unusable without a restart since information
is no longer
the r128 module) I am filing this bug to the Gtk library since
the bug manifests only when using Gtk 2.6 applications - Gtk 1.2
applications as well as Motif/Athena/whatever applications are
perfectly fine.
Ask if you need more information on hardware or software. Thanks.
Thomas Prokosch
-- System
Package: gqview
Version: 2.0.0-1
Severity: wishlist
It would be really nice if gqview would use the Gimp file format
plugins if they are detected. I know this is a major feature request
but writing an interface to the Gimp plugins would really pay off in
the long term for gqview and the whole
Package: slapd
Severity: normal
Yesterday I upgraded from slapd 2.1 to version 2.2. I was asked where I
wanted to store the database dump. However I misinterpreted the question,
the VERSION hint made me think that I was asked for a filename template
within an already existing directory. Later I
Package: slapd
Severity: normal
During the upgrade from slapd version 2.1 to 2.2 I noticed that the
configuration file /etc/ldap/slapd.conf is altered. It is a nice feature to
have the configuration altered to match a new slapd version (kudos to the
implementor), it works really well.
However I
Package: xscreensaver
Version: 4.21-2
Severity: normal
On my Xfce powered laptop I am seeing a New Login button in xscreensaver's
password dialog even though no gdmflexiserver is present. Clicking on the
button leaves the screensaver running with an error message saying that
gdmflexiserver exited
Package: mlterm
Version: 2.9.2-2
Severity: normal
Perhaps it is just me or I am doing something wrong, but I have deeply
looked into it (read the man page etc) and cannot find the reason. The
problem is that PAGE_UP (the default Shift+Prior) does not start backscroll
mode any more (SCROLL_UP,
Package: mlterm
Version: 2.8.0.cvs20040403-2
Severity: grave
Tags: security
Justification: user security hole
According to Secunia the version of mlterm which is currently in testing
and unstable has a serious buffer overflow. See
http://secunia.com/advisories/14509/ for details.
-- System
Package: fbpanel
Version: 4.0-1
Severity: normal
I am using fbpanel with the menu plugin. I have set the panel height to 26
pixel. I wanted to use an image file sized 80x26 pixels. While this works
great with the image plugin the menu plugin shows the image far too small.
-- System Information:
Package: torsmo
Version: 0.18-1
Severity: minor
When starting torsmo with the option to draw on the root window my window
manager slows down incredibly. I did not look at the source code closely but
from what I have seen torsmo grabs the background pixmap *every time* the
display is updated.
A
Package: kernel-image-2.6.10-1-386
Version: 2.6.10-4
Severity: important
I experienced an oops when launching a Java Virtual Machine. I cannot
reproduce this bug since it oopsed only once, it worked when I tried again.
However I have the feeling the kernel should never oops :)
The JVM is the
Package: qiv
Version: 2.0-3
Severity: wishlist
Tags: patch
qiv is my favourite application for setting the desktop background. However,
there is one disadvantage: qiv sets the background in a way so that
terminals with transparency support cannot grab the pixmap. To support this
the only thing to
Package: perlpanel
Version: 1:0.9.0-2
Severity: grave
Justification: renders package unusable
I just installed perlpanel on a machine without Gnome or similar stuff, in
particular a machine without hicolor-icon-theme installed. When starting up
perlpanel I just get the following error message,
Package: xscreensaver
Version: 4.16-1
Severity: important
With kernel 2.6, specifically 2.6.10 in my case, xscreensaver does not work
anymore. It blanks (and locks) the screen randomly, even if I use the mouse
and keyboard continuously. When trying to unblank (by pressing a key on the
keyboard)
Package: kernel-source-2.6.10
Severity: important
I am still experiencing in kernel 2.6.10 what seems to be bug #277934. When
I try to poweroff the machine it hangs with the error message given in the
subject. The syslog is already shut down so the message is printed to the
console.
-- System
85 matches
Mail list logo