-
Please engage in a spirited discussion about ALE but please also
refrain from comments about individuals that could be construed as
insulting.
Andy K3UK
Owner
Thanks for your comments, Rick and Allan.
Rick, you may have been trying to connect when I was installing a new amp at
the EOC yesterday, so both GPM and MU were off at times.
Open to suggestions as to what frequencies might be better for you , 7103
has a strong birdie nearby so is not
PSK PropNet is also near 7.103, actaully at 7.103.2
I need to get my ALE program back up again.
Fred
VE3FAL
HFALE/HFPACK member
On Tue, 20 Jan 2009 07:28:16 -0600
John Bradley jbrad...@sasktel.net wrote:
Thanks for your comments, Rick and Allan.
Rick, you may have been trying to
Hi John,
Maybe stay on 14111 for 20 meters when you run that band, and 7102 to
keep away from the birdie on 40 or you pick it for your situation?
When the FoF2 drops down to 1 or 2 MHz as we have been seeing, maybe 80
meters would work OK ? Here in the U.S. we do not have a wide bandwidth
As of 22:30 UTC both stations are beaconing every 2 minutes using
ALE400FAE. Both stations are transmitting callsign and locator
VE5GPM 7110.5 USB (unlicensed version)
VE5MU 3584.5 USB
Try a connect , or at least listen for these stations on these frequencies.
They will operate until
Hello to all,
The way to work (RX and TX) an ARQ FAE beacon is presented in this file: The
ARQ FAE beacon easy with Multipsk
Here is the WEB address to fetch this Word file:
http://f6cte.free.fr/The_ARQ_FAE_beacon_easy_with_Multipsk.doc
73
Patrick
- Original Message -
From: John
New version 3.0.148 up dates.
Russell
=
IN GOD WE TRUST !
=
Russell Blair (NC5O) Skype-Russell.Blair Hell Field #300 DRCC #55 30m
Dig-group #693
John, Rick,
Copied the following on 3584.5, 1631.1 Hz. It might help to specify the tone
frequency next time. Not sure I every copied John on my end.
CQ KV9UVE5MU CQ KV9UVE5MU CQ KV9UVE5MU CQ KV9UVE5MU VE5MU DE KV9U H H ad
to get me sound card switched back properly to mike in put from
Hello Skip,
Not too bad this ARQ FAE QSO monitoring. In ARQ modes in general (especially
in AMTOR ARQ), it is a bit difficult to understand the message (due to
retries and lack of decoding).
73
Patrick
- Original Message -
From: kh6ty kh...@comcast.net
To: