I am trying to help a friend set-up FLDIGI on his new laptop using his
Microham Digikeyer. Using the device router for the digikeyer (control
port 5 and PTT port 6) the digikeyer PTT test button does toggle the
PTT. However when using FL-Digi , frequency display corresponds with
the Icom 746
Andy, try Rig Cat instead of Ham Lib. That should trigger the PTT with a CAT
command. There seem to be quite a few reported problems trying to use
Microham Digikeyer, but I do not have one, so it is hard to help understand
what is wrong.
73, Skip KH6TY
- Original Message -
From:
Andy, here you say he has frequency display, but now you say he does not.
According to the manual, he has to CREATE virtual ports. I guess you do this
and then configure fldigi to use the port of your choice, but it must not be
a port already in use.
When the ports are created, I think fldigi
Andy,
The Microham manual says you must disable autobaud in any ICOM used with the
router. Make sure it is disabled and either 9600 baud or 19200 baud is
selected in the ICOM.
You must get frequency control working before you can use PTT by CAT.
73, Skip KH6TY
- Original Message
