Could someone tell me if DM-780 uses RSID/TSID. Thought it supported it, but
can't find where to turn it on or off.
Thanks
Lynn
Assuming you're using v5, it is activated via a macro instruction rsid.
For use on receive, go to Program Options, Modes + IDs, the Reed Solomon (RSID)
tab, and Enable RSID detection.
You can also activate a RSID transmit button as well, if you don't want to
program it into the macros.
Yes, it does.
TOOLSPROGRAM OPTIONSMODES IDS - SELECT THE RSID TAB.
ve3bdr
From: Lynn
Sent: Monday, August 30, 2010 5:18 PM
To: digitalradio@yahoogroups.com
Subject: [digitalradio] DM-780
Could someone tell me if DM-780 uses RSID/TSID. Thought it supported it, but
can't find where
: [digitalradio] DM-780
Yes, it does.
TOOLSPROGRAM OPTIONSMODES IDS - SELECT THE RSID TAB.
ve3bdr
From: Lynn mailto:n0...@cox.net
Sent: Monday, August 30, 2010 5:18 PM
To: digitalradio@yahoogroups.com
Subject: [digitalradio] DM-780
Could someone tell me if DM-780 uses
Thanks Andy.
PhilW de KA1GMN
On Tue, 2010-02-09 at 22:46 -0500, Andy obrien wrote:
Up to 4.
On Tue, Feb 9, 2010 at 11:11 PM, phil williams ka1...@gmail.com
wrote:
What rates if any, are available in DM 780 for THROB and
THROBX?
PhilW
What rates if any, are available in DM 780 for THROB and THROBX?
PhilW de KA1GMN
Up to 4.
On Tue, Feb 9, 2010 at 11:11 PM, phil williams ka1...@gmail.com wrote:
What rates if any, are available in DM 780 for THROB and THROBX?
PhilW de KA1GMN
Good Morning to the group,
I have a question about the drift in Digital Master 780. I am sending out CQs
in RTTY this morning on 20m and noticed as on other modes in the past that the
signal I send drifts to the right slightly over time. I started on 14.084.10
and a half hour later I am at
Hi,
Which build of DM780? There was a bug which is now fixed.
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: ac0mj ac0mj@gmail.com
I have a question about the drift in Digital Master 780. I am sending out
CQs in RTTY this morning on 20m and noticed as
On Sun, Jul 12, 2009 at 12:34:19PM -, ac0mj wrote:
Good Morning to the group,
I have a question about the drift in Digital Master 780. I am sending
out CQs in RTTY this morning on 20m and noticed as on other modes in
the past that the signal I send drifts to the right slightly over
- Original Message -
From: mikea mi...@mikea.ath.cx
I'll bet that you have AFC turned on, and that the frequency is drifting
because of AFC.
There's an option in DM780 to show the RF frequency + AF frequency, does
this make sense?
In the v5.0 betas it's in Tools, Program Options,
Andy,
Very impressed with Digital Master 780. I think
Simon did a wonderful job with this software and
it must have taken lots of man hours to get this
far.
The layout is very nice, especially the logbook,
browser, mode selection and macros. It certainly
seems to have everything the digtial
12 matches
Mail list logo
