[Elecraft] Elecraft 80 Meter Net Announcement

Due to a change in the Flux Capacitor ... opps the flux factor I will see I hope all of you at 0100 UTC tomorrow (Sunday night) on 3.942 +/-.Last week was so much fun with the 8 that braved the conditions. Remember.. The Elecraft Nets -- 20 Meter SSB Elecraft

[Elecraft] Elecraft CW Net Announcement

Good Evening,    I took a walk today to find more wood.  After two weeks of rain the sunny weather coaxed out quite a few mushrooms.  The chanterelle population was high before the thinning.  I thought it would take a few more years before they came back.  The slash is rotting into the soil

[Elecraft] Fwd: Re: K2 Problem

Sorry folks, I did not copy my reply to Lenny to the reflector. I will likely follow up with him by private email as he works through the problem, but I thought some might be interested in what I initially had to say. 73, Don W3FPR Forwarded Message Subject: Re: K2 Problem

Re: [Elecraft] K4 Headphones Q

I just received the cable I ordered from Amazon to replace the one that came with the Bose QC-35 II headphones. Made in China, not surprisingly, but has a 5', flexible, braided cover and comes with a screw-on 1/4" adaptor for the front panel headphone jack. It came just in time before my cat

[Elecraft] New K4 FT software testing

Sincerely apologies. That was supposed to be a private message to a different reflector. No further comments on this please. 73, Bob, N6TV > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] [K4FT] New K4 FT software testing

On Sat, Oct 17, 2020 at 1:48 PM Dick Dievendorff wrote: > KUP2 reset to factory defaults doesn’t have an “Are You Sure” confirmation > popup. > Please add it. This will avoid many angry phone calls to support and huge flames on the Internet. > Neither do any of the other buttons on the

[Elecraft] KPA1500 enhancement request

It would be very nice if the KPA1500 would remember on a per band basis whether the mode was STBY or OPER the way it remember if the ATU is IN or BYP; to an outsider, this seems like not a big ask and it would make overdriving the amp easier to avoid as there are some bands I don't use it

Re: [Elecraft] K3 and Astatic mic?

Dave, My Astatic Golden Eagle works great. I used a 9v battery in the base. Never touched the mic element or volume control "slot". No bias needed with the 9v Battery in use. IIRC I used 45 for mic gain and 18 for compression or something close to that. Always got great audio reports. I

[Elecraft] FW: K3S filter Problem

Bob, I tried to email you directly, but it ‘bounced.’ Are the filter Elecraft/Inrad made filters? I doubt the 2 filters are bad if they are Elecraft sourced.  That would be the last to suspect. Make sure you have the MODE selected to receive that is enabled for the filter. Else try this;

Re: [Elecraft] KPA1500 Using Multiple Antennas With the Tuner

I agree, Dick - power settings per band are fine.  The issue is power settings per band and  per matching solution 73, Pete N4ZR Check out the Reverse Beacon Network at , now spotting RTTY activity worldwide. For spots, please use your favorite "retail" DX cluster. On

Re: [Elecraft] Headlights with red lighting

On 2020-10-16 20:37:-0500, Dave Fugleberg wrote: >Watching this thread with some interest, as I use my K3 to drive >transverters when roving in VHF contests, and it's hard to see the front >panel controls at night. I tried making a light with a bit of aluminum >angle stock and a short strip of

[Elecraft] FW: K3S filter Problem

No Joy yet. Two list members made suggestions, i.e. “Are the filters “ON”, yes, and perhaps mis-plugged, but I don’t see how that could happen and still fasten them to the board. Anyone have another idea? I hesitate to open the rig up, as I have the sub-rcvr installed and my 80 year old