KIO3B Interface Option manual:
Monitoring RS232 Data
If you have a device such as a STEPP-IR antenna controller or pc program
that monitors the RS232 port, you
can continue to use it with the USB port active.
You can connect your device to the RS232 data in two ways:
1. Use the RJ-45 to DE-9S
Hi John,
If you have *CONFIG: RS-232* set to *USB*, then both K3 serial ports are
fixed at 38400 baud, so you have to use that setting in the SteppIR
controller, and set the radio type to Elecraft (or Kenwood).
A custom cable is required to allow the SteppIR auto-track to work via the
K3 9-pin
K3 won't do both RS232 and USB at the same time. You'll have to put a
software shim in your PC to control the SteppIR.
--
73,
-de John NI0K
https://www.qrz.com/db/NI0K
John Reilly wrote on 7/31/2020 11:53 AM:
I have a BigIR which won't connect to my K3 for frequency control It
worked prior
I have a BigIR which won't connect to my K3 for frequency control It
worked prior to my move 10 months ago, but not now. I suspect a setting
problem. I use the K3 USB for rig control and audio, and trying to use
the RS232 RJ45 plug for the SteppIR. It appears the SteppIR is not
getting
4 matches
Mail list logo