I used to tap NTCH once for the auto notch. Now it just turns on the manual
notch. Is there another way to access the auto notch after the firmware update?
Thanks!
__
Elecraft mailing list
Home:
Are you sure you're not in CW? There is no auto notch in CW, only SSB mode.
(or some other mode I'm not aware of)
That was it. Thanks!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I was hoping that some of the folks with the P3s could post some screen capture
shots. They would be fun to see!
My order was placed at 6AM on 4-16 so I probably have a couple weeks to wait.
Thanks in advance!
Dean
__
Elecraft mailing
be appreciated.
Thanks!
Dean
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
This is in CW mode.
If I change filter width while the RIT has an offset, the next time you adjust
frequency or RIT, the P3 will not track accurately. Even if you turn RIT off,
the P3 will still not track frequency accurately with the K3 until you turn the
P3 off and back on.
I have
on my K3 and watching other K3s on the air in the band scope.
It seems like a fairly easy fix to adjust the ESSB menu alignment so we can
really turn our bandwidth down to 3.0 or even a little less. This is my request
to Elecraft.
Thanks!
Dean
I am looking for a source for good advice to set up a panadaper, software etc
for the K2. Best to get/build, how to set it up etc.
Thanks in advance for your help!
Dean
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
model, it would be helpful to know what your actual
power out is.
Thanks!
Dean
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
information that has been written here. It really
helped me to make the decision on this rig.
I will probably have some technical questions, but the build went perfect and
everything seems to be working well.
I might just stay up all weekend!!
Dean
, the 2.7K passband on CW was set up from 100 htz to 2800 hts and
I would like to set up the K3 as close to that as I can for listening up and
down the band.
Thanks for your help!
Dean
__
Elecraft mailing list
Home: http://mailman.qth.net
. In effect, I
have no Fast AGC.
My K3 came with firmware 3.68 and I upgraded to 3.76 but they both have the
same problem.
Any ideas?
Thanks!
Dean
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
All of my mics are set up for standard Yaesu hf rigs including an MD-100 and an
MH-31. My K2 was set up for this configuration too.
Is it feasible to configure the K3 to use these mics? Or do I need to change
all of the mic configurations?
Thanks!
Dean
Can any body recommend a couple of the best digital programs to work with the
K3? I was looking for one that is compatible with PSK D and FSK D.
Thanks!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
broadcast,
and I sometimes take it out to my shop to listen to while working. I could us
an exterior speaker but in many cases, I prefer the simplicity of a built-in
speaker.
Thanks for your help!
Dean
__
Elecraft mailing list
Home
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
on one side. Is this square tab the equivalent of the
flattened end? Thanks for any help.
Dean K6DDJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
can help you paint a picture in your
mind to help explain what I have here.
Dean
Dean,
Look carefully, one side has rounded corners while the other side has
angular corners (even though it is smaller). The flat side is the one
with the angular corners.
73,
Don W3FPR
On 10/27/2012 6:41 PM
Hi Don,
Oh OK! That makes sensethe screw is at ground potential and
therefore less affected by a screwdriver adjustment. I looked at the
schematic and got it all fiqured out. Thanks so much for taking the
time to help out a fellow builder.
See you on the air soon!
Dean
K6DDJ
Dean
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
a question or two I had
during the build. The forum was a god-send.
Very nice kits Elecraft!
73 and see you on the air!
Dean K6DDJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
that those 4 inductors are
really shown in the IN position not the RESET position as declared on
the schematic. Am I correct or just don't understand?
Thanks,
Dean
K6DDJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Hi Don,
Thanks for the confirmation. Yes the little ATU works fantastic on
my antenna. Worked Sweden this weekend with only 1 watt to my dipole!
I understand the ATU's circuit now which is what I was trying to do. I
am glad that I am not loosing my mind!
Dean
Dean,
I never noticed
that the
main power supply is stable during the event.
It seems like it is sometimes brought on by routine heating and cooling.
Like when I am running RTTY off and on.
Any ideas would be greatly appreciated!
Dean
voice to
digital.
Could somebody at Elecraft confirm if it is a firmware issue and if there is
a way to turn it off and make the Data lower end flat like SSB?
Thanks!
Dean
KG7MZ
K3 #3873
__
Elecraft mailing list
Home: http
seconds rather than having to
manually reset it.
Thank you Elecraft for a job well done!
Dean
KG7MZ
**
Hi,
Until recently, I have not been interested in the P3 because I didn't think
it would be useful for my way of operating. Now, I think I am missing
help!
Dean
KG7MZ
Sent from my Galaxy Note III
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Great news Rick. Can you give me some details to get me started? Are
you using the "KPA1500 Remote" application? No problems with port
forwarding my router.
Dean
K3GGN
~~~
On 9/22/2020 7:28 PM, Rick Tavan wrote:
Yes, I do it all the time. You may have to set up some port forwardin
I have a K3 in the 3000 serial number range that I built from a kit originally.
This last year the audio has been cutting out after playing at a high level for
a while on the internal speaker.It gets kind of crispy sounding like you were
wiggling a loose wire and the volume goes way down but
At least it's not another TLA (Three-letter Acronym) :-)
I work in aerospace, a field rife with with TLA's.
73,
Dean K0MKT
K2 #4359 (finishing alignments tonite, then on-the-air!)
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Trev - K6ESE
Sent
I am looking for the simplest method to fine tune the frequency readout on my
K2 using WWV. It reads about 60 hz high right now.
Thanks for your help!
Dean
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Lyle:
Is remove of L4 on the front panel board and L7 on the KIO3 audio board
official Elecraft modifications?
I'd hate to void my warranty by messing with something that isn't official.
Thanks, Dean Straw, N6BV
Lyle Johnson wrote:
I bit the bullet and removed L4 and L7 this morning
Thanks, Lyle.
73, Dean, N6BV
-Original Message-
From: Lyle Johnson (via Nabble)
[mailto:[EMAIL PROTECTED]
Sent: Monday, November 10, 2008 11:52 AM
To: Dean Straw
Subject: Re: [Elecraft] K3 RF Feedback Problem
Is remove of L4 on the front panel board and L7 on the KIO3
AGC system,
however.
Have you tried the S9+50 dB input signal with the Slow AGC setting?
73, Dean Straw, N6BV
GA for all K3 users.
So many guys has talks about perfect audio sound of K3.
So many talks about analog K3 sound on e-ham.
But how it possible if K3 have the so bad in-band IMD?
You can
IMD.
This article was why the ARRL Laboratory started making detailed in-band IMD
tests for receivers after December 1995.
Thanks 73, Dean, N6BV
Senior Assistant Technical Editor, ARRL (Retired)
-Original Message-
From: e72x (via Nabble) [mailto:[EMAIL PROTECTED]
Sent: Thursday
supply so I also ruled out a power
supply issue. it is just as if the ALC is kicking in and turning down the power
randomly. When the output power drops, the current also drops accordingly.
The radio seems to work perfectly otherwise.
Your suggestions are greatly appreciated.
Dean
KG7MZ
Thanks to everybody for your help. I changed the value of R98 from 230 to
560 and now the power output is stable and tracks the called for power
much more consistently too.
5319 is now working perfectly. What a radio!
Dean
KG7MZ
___
Elecraft
I am looking at upgrading my K2 with the KSB2. The manual states 10-15 mA of
current drain and I would like to know if this turns off while in CW mode, or
if there is a way to turn it off. I will be using my K2 for wilderness hikes
and I will need to turn off non-essential drain.
Thanks!
Dean
to work good on other radios.
Thanks for your help and ideas!
Dean
KG7MZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
display of 10368-10370?
Tks!
73,
Dean, K0MKT
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K144XV-with-external-10-GHz-Transverter-tp5299602p5299602.html
Sent from the [K3] mailing list archive at Nabble.com
We have the good luck to live a short drive from Elecraft central. CEO Eric was
the principal speaker at PAARA radio club last Friday night. About a third of
his talk was photos and snippets about members of the Elecraft team. Tenure of
10+ years was not uncommon, as were newbies because
We have the good luck to live a short drive from Elecraft central. CEO Eric was
the principal speaker at PAARA radio club last Friday night. About a third of
his talk was photos and snippets about members of the Elecraft team. Tenure of
10+ years was not uncommon, as were newbies because
KAT500 Utility on my Mac mini does not connect from the Mac to KAT500.
When I fire up the Utility, it stays in Initializing state until the
connection attempt times out. This is repeatable.
I'm pretty sure the FTDI driver itself is OK as I refreshed the P3
firmware using a separate KXUSB via FTDI
For sake of brevity, I'll restate my problem as inability to
successfully connect my KAT500 tuner to my Mac mini. It turned out to
be 100% cockpit error with my hands on the stick.
To avoid my issue: Plug the KAT500 end of the KXUSB into the PC DATA
port, not the TUNE port. Take the extra five
Balun at Input or Output of Antenna Tuner?
Dean Straw, N6BV (Senior Assistant Technical Editor, Retired) December 12,
2011
I have been lurking on the Elecraft Reflector monitoring the animated
discussion about where to place a balun -- at the input or the output of a
tuner. I was going to jump
for a CM choke balun placed at the
output terminals of an antenna tuner.
73, Dean, N6BV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
are valid
ones, and like most engineering matters there are tradeoffs to both
approaches. Some tradeoffs involve significant smoke and flames... !
73, Dean, N6BV
-Original Message-
From: Joe Subich, W4TV [mailto:li...@subich.com]
Sent: Tuesday, December 13, 2011 11:21 AM
To: Dean Straw
Cc: j
The K3UtilityVersionInfo.txt file that came with K3 firmware MCU 04.83
states that 1.4.3.21 is the most current Windows K3 Utility version. Yet
1.13.5.9 is the K3 Utility production version according to
http://www.elecraft.com/K3/k3_software.htm#k3util Assuming this was a web
page mistake, I
/k3_software.htm
The K3UtilityVersionInfo.txt file is stale. I'll try to get that changed.
73 de Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Buzz Dean
Sent: Friday, February 28, 2014 0:06 AM
To: elecraft
TV radio jargon also has it as six two and even, over and out (Dick
Tracy maybe?)
K3GGN
~~~
On 4/30/2014 12:10 PM, Kevin wrote:
The made up radio jargon which bothers me the most is over and
out. Which do you mean: over or out? They mean very different
things and CANNOT be used
I believe that is why Jeff, kg7hdz, provided a link to an excel chart that
has lengths of NO half waves in US ham bands. Saves a bunch of math.
Making the Antenna " End fed non halfwave( in the ham bands )wire" or the
EFNHWW.
Whew....
73 all
I'd appreciate any input. TIA
72
Dean/K2WW
On Feb 18, 2017 8:09 AM, "jrquark" <jamesfors...@me.com> wrote:
> The confusion here is a common one, closed vs open ended resonators,
> especially if one looks at the poorly explained graphs in most physics
> texts.
>
to the most
current release and still no change.
Any suggestions?
Dean ~ K2JB
Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Fred
500w 》1500 w -It's less than an S-unit increase in signal and makes
your power meter spin fast.
Just putting it into perspective ...I'm sure you already knew this.
Happy New Year/73
Dean K2WW
On Dec 30, 2016 12:36 PM, "Fredric Serota" <fser...@msn.com> wrote:
>
Carl
Seems like a lot of work!
You went through the effort of cross posting it, tell us more about the
k3s here.
73
Dean K2WW
On Dec 20, 2016 7:06 PM, "Carl Jón Denbow" <c...@n8vz.com> wrote:
> Due to some recent trades I now have three K3-line rigs. I only need two.
>
Harry
To be reminded, one must have first been informed. :)
I thought you were dealing with a higher current system. Sorry to be
presumptuous. My K2 would tx approx 10 min +/- on a 2.9ah ( drawn to 50%
discharge).
Guess we should have asked.
73
Dean K2WW
;, by KI0BK. As someone suggested earlier is a 3
stage controller, battery friendly. Those using it claim it's quiet and
EFFICIENT, very important at $1 a watt and mostly cloudy where I live.
Stick with one designed by a ham, who's goal is radio quiet-
!!!). I would even settle
forone that was only 6m - 23cm. Call it the KX-6/23 or something.
>>>>>
Probably a bit less $ than a 2kw, 30lb, Sold state Amp.
I'm in!
73
Dean-K2WW
__
Elecraft mailing list
Home: http://mail
of my call (and name) also in my email address.
But I guess in the big picture who cares. Just a courtesy I guess.
73 all
Dean LaClair K2WW
On Apr 23, 2017 2:50 PM, "Don Wilhelm" <donw...@embarqmail.com> wrote:
> Not too many reading posts on this reflector who do not know what
On Mar 3, 2017 10:46 PM, "Dean L" <dean.k...@gmail.com> wrote:
> Feb QST cw resonant speaker... awesome!
> Dean/k2ww
>
> On Mar 3, 2017 11:39 AM, "Kevin - K4VD" <ke...@k4vd.net> wrote:
>
>> Hi Eddy:
>>
>> I use Mackie CR4 pow
tes?
Sorry for hijacking the slightly OT thread
73 all
Dean K2WW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hoste
Hopefully your assumptions are off track-
Sure would be nice addition to the kx3
73 all
Dean
K2WW
On May 12, 2017 9:17 AM, "David Woolley" <for...@david-woolley.me.uk> wrote:
> Using a pad would be bad design, as simply increasing the level of
> negative feedback would
'Face in the crowd"? Are you serious? Take a look around... Elecraft is a
humble operation that strives to make a quality product at affordable price.
Never had a sip of the kool-aid, just a content customer.
Good luck with your search.
Signed (proudly)
Dean M LaClair
On May 27, 2017 11:
On Sep 14, 2017 8:02 PM, "Wes Stewart" <wes_n...@triconet.org> wrote:
There's an LDE on this reflector.
Long Delayed Echo?
73
Dean
K2WW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/ele
an L.E.D
flashlight.
.72 all
Dean K2WW
PS: PLUS it snowed 3 inches over the weekend, i would have been tripping
over the counterpoise...hi
On Nov 27, 2017 12:23 PM, "Wayne Burdick n...@elecraft.com [KX3]" <
kx3-nore...@yahoogroups.com> wrote:
>
>
> CQ WW CW is one of my
Thanks for the interest,
The KX3 has been sold,
The K2 is still available for shipment or delivery to Dayton
72/73 all
Dean K2WW
See you at Dayton
Flea market spots 7940-42 & 7840-42
__
Elecraft mailing list
Home: http://mailman.qth
I have a surplus to my needs(long story )
KX3 with roofing filter clock/battery charger autotuner, side rails and
plastic cover shield.
Works as it should,
$1150
K2/100
W/ssb AND dsp board
$750
Both delivered to FDIM/Dayton (or shipped on your nickel)
73
Dean K2WW
DEAN.K2WW
AT GMAIL
I have a K2/10 surplus to my needs. It has the autotuner / NB/ audio
filter. SSB board with it but not installed.
A few scratchs but still a work horse.
$500 obo avail at Dayton or by USPS.
73
Thanks
Dean K2WW
DEANDOTK2WW AT GMAIL
I have a Heath HW-8 with matching power supply.
Might need alignment but looks to be in decent shape. $150 obo plus usps
Can deliver to Dayton.
73
Dean K2WW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
My bad didn't intend to send to elecraft list.
Oops
73 all Dean
On Fri, May 11, 2018, 14:42 dean laclair <dean.k...@gmail.com> wrote:
> I have a Heath HW-8 with matching power supply.
> Might need alignment but looks to be in decent shape. $150 obo plus usps
> Can deliver to Dayt
u asked the question rather than change breaker size.
73
Dean
On Wed, Jun 13, 2018, 23:03 Michael Gillen via Elecraft <
elecraft@mailman.qth.net> wrote:
> Kind of a dumb question however here goes:
>
> I got my K3S a short while ago and now I want to add the KPA500 and KAT500
> to
a funeral... hope to hear you on. Stay
warm
72
Dean K2WW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hoste
If someone will pay $400 for a working HW-8, please take down my email and
contact me.
I might be able to save you some $$.
73
Dean K2WW
>>>>>>>On Feb 7, 2018 04:16, "eric norris via Elecraft" <
elecraft@mailman.qth.net> wrote:
Is $1500 outrageous for an
That must be the JApanese version, Bill has...
HI
73 all
Dean
K2WW
On Sun, Aug 12, 2018, 17:44 Nr4c wrote:
> I believe the JAT500 wants to be ON before the K3(S) is powered ON. Mine
> stays on 24/7.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
> > On Aug 12, 2018
Not trying to hijack thread only broaden it...
Has anyone used a cell modem on one side with modest BW, to use K3/0?
73
Dean K2WW
.
On Sep 1, 2018 15:39, "David Cutter via Elecraft"
wrote:
I will soon be building a remote control station about 20miles away. Both
stations h
February it was minus 40f.
If anyone wants to see pix email me offline.
I ran all day FYBO contest at -17f with my kx3, look at my QRZ page.
Stop the fussing and get on the air!!!
I think I made it under the wire.
73
Dean K2WW
On Thu, Jul 5, 2018, 22:38 Michael Walker wrote:
> Just to exp
Does anyone have the HAM RADIO MAGAZINE set of cd's ( or any other form)
surplus to their needs?
I'm "jonesing " for some good reading without spending a fortune. ( i
bought many of them once already...hihi)
Please contact me offline
Thanks and vy
73
I have a friend who worked for American Airlines Baggage.
His word to live by:
Never check ANYTHING (checked baggage) you cant live without when you
arrive at your destination!
Light sticky fingers everywhere
Just saying
73
Dean K2WW
On Thu, Dec 6, 2018 at 5:55 PM Dave Van Wallaghen wrote
## snip>>>indicate relatively soon...
I think he meant more like SOMEDAY....
73
Dean K2WW
She'll be coming around the mountain when she comes
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
H
't be moving to a k4... No need.
I'm happy.
73 all
Dean K2WW
On Mon, Jun 24, 2019, 13:32 Nr4c wrote:
> Hopefully there will be a lot of them in users hands by then (MINE)!!
>
> Thanks for the update.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
> > On Jun 24, 2019
I have for sale my KX3 in very decent shape, includes:
KXat3-auto tuner
Kxfl3-roofing filters
Kxbc3- Batt charger/clock
Protective Handles
Can deliver to hamvention, ior will ship USPS f not sold before then.
Pic available
Reason for selling?
Don't need 2 KX3s
$1200
72
Dean K2WW
KX3 WITH:
Roofing filter
Battery/clock
Atu
Great shape
Have new side handles
$1200
Reason for selling?
I don't need 2
Reply direct
Thanks and 72
Dean/K2WW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
.<<<<<<<<<<<<<<<
I often wonder how this man does all his duties, (including answering
emails) and have any time for sleep, family, non ham stuff A true
legend.
73
Dean K2WW
Show quoted text
The unit was sold and hand delivered to a good home. Thanks for your
interest!!!
73
Dean K2WW
On Sun, Feb 23, 2020, 10:15 PM Dean L wrote:
> Both are in excellent shape and work as they should.
> $2200 PayPal f and f, MO or Cash
> Will deliver anywhere along the I95 corridor
SOLD
Thanks all who inquired
73 Dean
K2WW
On Mon, Feb 24, 2020, 2:31 AM Dean L wrote:
> I have a 2nd receiver for the K3 with the original KSYN syn board 2.7;1k
> and 400hz filters installed, $450 shipped,
>
>
> Contact me off list.
>
> PayPal friends and family, or P
I have a 2nd receiver for the K3 with the original KSYN syn board 2.7;1k
and 400hz filters installed, $450 shipped,
Contact me off list.
PayPal friends and family, or PO money order.
73
Dean
K2WW
__
Elecraft mailing list
Home: http
Both are in excellent shape and work as they should.
$2200 PayPal f and f, MO or Cash
Will deliver anywhere along the I95 corridor next week.
Contact me off list
73
Dean K2WW
518-302-1177
__
Elecraft mailing list
Home: http
We all have similar stories, sad part is, there are extra class licensees
that dont know any more about oscillators than ohms law or caculating the
length of a half wave dipole.
The ones to "tell the tell" ain't gonna be around forever, few of us left,
ain't no more coming over.
73
Apple and Windows...
Wow guess we should bring up politics next , NOT!
It's about time fellas
SIGNED
Dean K2WW
On Sat, May 2, 2020, 00:47 Victor Rosenthal 4X6GP
wrote:
> Apple breaks it's OWN hardware when it wants you to buy a new computer.
> I have a Macbook Pro from 2009 which
Oops I hit send meant to hit
73 all
Dean K2WW
On Sun, May 10, 2020, 21:52 Dean L wrote:
> FS, K2/100, CW/ssb, DSP board, early Serial#,
> Works as it should, could use updates $625, PayPal F, $16 USPS.
>
>
__
Elecraft
Does anyone have info about remote control of KX3/KX2?
I'm interested also...
In remote control of KX3, not opinions on social distancing.
73 all
Dean K2WW
On Wed, May 13, 2020, 17:36 Lyn Norstad wrote:
> I can operate pretty much self-contained from home, and do so for
> statewid
Can't image why not. Hihi
Hope everyone is well on the left coast, well everywhere!
Let's beat this crap and get back to FB.
73 all
Dean K2WW
On Mon, May 18, 2020, 15:44 Wayne Burdick wrote:
> I have K2/10 S/N 1, but I'm not sure I want to part with it.
>
> Wayne
> N6KR
&g
If you have one surplus to your needs you'd consider selling, please email
me direct.
73
Dean K2WW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Only about 35 years...
I too thought I don't remember the commercial, but I do remember the woman
breaking the glass with her voice.
And the "cool" guy in the overstuffed chair, the music blowing his hair
back and his wine glasses to his hand
You've come a long way baby!
73
Dean
On S
k2/100 has found a new home-
Thanks 73
Dean
On Sun, May 10, 2020 at 9:52 PM Dean L wrote:
> FS, K2/100, CW/ssb, DSP board, early Serial#,
> Works as it should, could use updates $625, PayPal F, $16 USPS.
>
>
__
Elecraft
Thanks for the responses.
>From what I can gather, on a K3, manually adjust power out, (set it in the
menu)
Use ALC as a backup protector.
Call it a day.
This AMP makes a KW without much drive ( nowhere near 65w in)
73
All the best
Dean
K2WW
On Fri, Jul 17, 2020, 11:26 Charlie T wrote:
My smartphone adjusted my reply.
It was supposed to say-
EBAY Charges a VIG that we HAMS with integrity don't need to pay.
No wonder good hams have a bad taste in their moth for PayPal.
Your Milage certainly will vary
Things sure are different.
Rant over
73 all
Dean
On Fri, Jun 12, 2020
That's awfully nice of you.
When one of these buyers rips you off through EBAY, saying your 100% FB
equipment is not "100% FB" you will change your mind.
EBAY is for scoundrels, not Hams with integrity.
Hence the "Vig" we Had don't pay!
73
Dean K2WW
On Thu, Jun 11, 20
Why would you pay Epay their "cut" when you have the entire elecraft
audience at your findertips?
73
Dean/K2WW
On Thu, Jun 11, 2020, 14:14 Paul Gacek via Elecraft <
elecraft@mailman.qth.net> wrote:
> I listed one of my pair on eBay if anyone is interested.
>
>
> https
I'm working on a Yaesu VL1000 for a friend and wondering if anybody's had
experience setting up ALC with the K3 and the VL1000?
Is it necessary?
I'm not much of a QRO guy as you can probably tell.
Thanks in advance for your help 73
Dean K2WW
1 - 100 of 128 matches
Mail list logo